This commit adds an option to store OpenThread settings in RAM for the
case where the flash driver is not available. This can be useful
for testing openthread on new platforms which are still under
development.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Bluetooth callbacks are now registered dynamically again. When Bluetooth
callbacks were registered statically, they could be invoked before the
Bluetooth shell (ctx_shell) is initialized. The callbacks try to
shell_print(ctx_shell, ...), which results in a fatal error if ctx_shell
is undefined.
Fixes#40881.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
Add new Kconfig BT_CONN_TX which is true if the ACL and
ISO configuration allows for sending data. This is mainly
used to avoid initialization of the tx_complete_work
for ISO sync receiver only builds.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If CONFIG_BT_ISO_BROADCASTER=y and CONFIG_BT_CONN=n, i.e
an ISO broadcaster only build, then the handling of the
TX callback was not properly initialized, causes a fatal
issue when sending.
This commit moves the tx_complete_work out from the ACL group
and into the common area, so that it will be enabled
for connected ISO as well as broadcaster ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Although we are declaring `pm->enable`as bitfield, it ends up using
more memory due memory alignment.
Since we already have an atomic variable for device flags, this commit
adds a new flag to indicates whether or not device runtime is enabled.
Doing it we are saving some extra bits and avoiding need to lock the
mutex in several situations since we can atomically check if pm
runtime is enabled on a given device.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Refactor implementation to use a single common ISO PDU
node rx type for ISO Synchronized Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds reassembly of framed PDUs to ISO adaptation layer.
Reference times are also computed based on anchor points,
transmission latency components and a PDU specific time offset.
Some partial preparations for ISO broadcast can be found for
convenience. This needs to be properly merged, and currently will not
work with both CONFIG_BT_CTLR_CONN_ISO and CONFIG_BT_CTLR_SYNC_ISO
enabled.
Includes fixes and improvements for unframed mode.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
The GATT Server should wait with clearing Service Changed
indication configuration data until the response callback is
called. Otherwise the indication may not be properly delivered
to a given GATT Client.
Fixes: #40761
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Atempting to mount LittleFS with the flag will cause the fs_mount
to return -ENOSUP and log error message.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mounting FAT FS will set FS_MOUNT_FLAG_USE_DISK_ACCESS to the flags
of an object serving the mount point.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
- Do not ignore unsolicited status messages to allow for the API to be
- used asynchronously
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
- Add optional callback to receive status messages even when using async
API
- Split acked and unacked API
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Rename PM_STATE_DT_ITEMS_LEN to DT_NUM_CPU_POWER_STATES to make its
purpose more clear. This macro could be made part of a Devicetree API
for PM in the future.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the PM_STATE_INFO_DT_ITEMS_LIST macro to
PM_STATE_INFO_LIST_FROM_DT_CPU to make its purpose more clear. Similar
naming scheme is found e.g. in the GPIO API.
Associated internal macros and docstrings have been adjusted, too.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As per the GATT documenation, the conn pointer may actually
be NULL in the notify callback, indicating that the connection
is being unpaired.
Add a check for conn == NULL to avoid calling bt_conn_index
on a NULL pointer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCC update should be done after the connection is encrypted.
Before the connection is encrypted, the GATT Server does not know
if the reconnecting peer was actually bonded.
Fixes: #40759
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
In bt_iso_chan_disconnected we did not check for role before
we started to get the CIG and setting the CIG state.
Mmove the CIG code to the central part of the if statement.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
By use of the new macro RXFIFO_DEFINE, a complete set of data
structures for supporting a MEMQ'able FIFO with data pool backing is
created. This is intended for RX nodes such as done-events, RX PDU-
and ISO PDU events. The purpose is to simplify the data management
and code complexity, and provide re-usability.
This commit implements the existing done structures (MFIFO, mem pool,
mem link pool) as an RXFIFO. ISO is the next customer, and later the
pdu_rx_free MFIFO- and related pools may be refactored.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When LOG2 is enabled, timestamp func which was just set
according to various conditions, is overwritten using sysclock.
Since sysclock is very fast, it will cause uint32_t to wrap very
fast and cause the time to start over from 0 often.
This commit combines the two statements doing the same thing,
to one statement.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
Move all defines that specifies (D)PPI resources which are used
to dedicated files which have no include dependencies. This allow
to use them in nrfx_glue.h to specify fixed (D)PPI channels used
by the bluetooth.
Additionally, added mask with GPIOTE channels used by the bluetooth
controller. It was previously not defined which could lead to
conflicts since same channels could be allocated by the nrfx_gpiote
user
Updated nrfx_glue.h to use new approach.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This PR add multi advertising sets for bluetooth mesh adv bearer.
At the present, the local mesh network occupy single advertising.
And GATT Services Advertising use a single advertising, if support.
One or more advertising sets maybe used by relay node.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The type qualifier of the return type is causing warnings if
-Wignored-qualifiers, and it's irrelevant anyways since
the function returns a value and not a pointer
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
The comment before this change was misleading, as those functions
(and other ones used from the level of user space application) require
DSA interface (like lan{012}), not the master one (like eth0).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The address of DSA API functions' structure available for usage from
the level of user's application (like for example in
samples/net/dsa/src) is stored in dsa context, not per DSA interface
device.
The struct dsa_context is defined once for all DSA (i.e. not master)
interfaces.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Transports should close the socket in case of `setsockopt()` failure,
otherwise we end up with a leaked socket, as it won't be closed
elsewhere.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Asynchronous API may utilize DMA and significantly reduce
CPU load during outputing to UART.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Taking random numbers from hardware may be time consuming thus
it was deferred to a work queue. On the other hand, taking them
from software algorithm is fast. Use xoshiro128++ when enabled,
instead of real random numbers from hardware RNG generator. They
are use for random intervals in the test so no security concerns
here.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This adds basic support for GDB stub on Xtensa. Note that
this only provides the common bits on the architecture side.
SoC support is also required to fully enable GDB stub on
each Xtensa SoC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the architecture interface so that the GDB stub can
deal with breakpoints and watchpoints. By default, weak
functions are implemented to indicate breakpoints and
watchpoints are not supported.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some architectures may require memory accessed to be aligned to
certain size and cannot be accessed byte-by-byte during memory
read/write in GDB stub. This adds the ability to specify
the alignment via kconfig. The existing byte-by-byte access is
retained as it is simplier code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds bits for architectures, SoCs or boards to restrict
memory access in GDB stub. This is mainly to make sure
GDB stub only read/write to memory that can be legally accessed
without resulting in memory faults.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Storing the state where this is the first GDB break can be done
in the main GDB stub code. There is no need to store the state
in architecture layer.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds a new function gdb_bin2hex() to convert binary into
hexadecimal string representation. This is similar to
bin2hex() but does not force a null character at the end
of the output buffer. This avoids an issue where the last
character of the hexadecimal string is replaced with
null character before sending to GDB.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is no need to bail out of the debugging session if there
are recoverable errors, for example, erroneous GDB packet
received, cannot write to certain registers, etc. So simply
send an error message to GDB and continue the GDB stub main
loop for more debugging.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
