Allow gPTP sample to be run via run-sample-tests.sh script.
This makes it possible to do simple smoke testing and verify that
gPTP stack is not broken.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We have a use case for checking the results of a DT_PROP_HAS_IDX()
call with COND_CODE_1(). That won't work because its expansion is an
integer comparison; COND_CODE_1() expects a literal 1 or 0.
Adjust the macro implementation so it expands to a literal 1 or 0.
Make this work even when the index argument needs an expansion while
we're at it.
Fixes: #29833
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
TSIM3 is a LEON processor and system simulator.
This commit allows using TSIM sanitycheck and the make run target.
TSIM parameters can be further specified in the board configuration
using TSIM and TSIM_SYS.
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Fixes: #28462
This commit allows shields to be defined in other BOARD_ROOTs, either
using `-DBOARD_ROOT=<path>` or a Zephyr module defined BOARD_ROOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add missing infrastructure for simulation run on mdb-nsim.
When the nSIM via mdb simulation support was added to Zephyr
scripts the handler call was lost. So nSIM via mdb simulation
was broken from the beginning.
Fix that bu adding missing handler call fro mdb-nsim.
Note that we use BinaryHandler which call west flash. It's
required in case of nSIM via mdb as we create mdb.pid file with
mdb-nsim runner help.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
ARC nSIM boards (starting with nsim_ prefix) allow to run
tests in simulator (nSIM). However with proper west runner
the tests can be run on real HW (FPGA based).
So check device_testing flag firstly and rollback to nSIM
simulation run in case of device_testing is not set.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Record MDB's CLD process pid to file so this process can be
terminated by sanitycheck infrastructure.
Update mdb runners test to be able to handle changes.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
mdb runner is quite special as it can be used to run Zephyr on
both simulator (nSIM) and real hardware.
However it is really misleading as same command (west flash)
will run Zephyr in simulation for one board and try to run it
on HW for another board. Things are getting worse for boards
supporting both runs in simulation and on real hardware.
Let's split mdb runner for mdb-hw (for runs on HW) and mdb-nsim
(for runs in simulation) runners.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
The zeth interface was left hanging around when the test
finished but we can remove it here as it is not needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The current stty command uses a hard code value of 1200. This is not
compliant with SAM-BA specs and may create compatibility problems. Add
an optional speed argument with 115200 as default value following SAM-BA
specifications. All boards that needs a different speed should define
board_runner_args(bossac "--speed=<value>") with value as required
speed.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Introduce TagoIO IoT Cloud HTTP post client example. This explorer
Zephyr network resources to demonstrate an end to end application.
The TagoIO allows that any user can test on a easy way Ethernet, WIFI
and Modem (PPP) with BSD sockets. The example provides overlays to
configure WIFI and Modem.
The application consists an a pseudo temperature sensor that sends
periodically data to TagoIO IoT Cloud platform. The data can be
visualized on a web browser dashboard, cellphone or tablet. The
steps to configure TagoIO are described on the example documentation.
Special Variables:
- CONFIG_TAGOIO_DEVICE_TOKEN DEVID token generated by TagoIO
- CONFIG_TAGOIO_HTTP_WIFI_SSID SSID when using WIFI
- CONFIG_TAGOIO_HTTP_WIFI_PSK PASSWD when using WIFI
- CONFIG_MODEM_GSM_UART_NAME UART label when using MODEM
- CONFIG_MODEM_GSM_APN APN when using MODEM
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Fixes: #29758
Commit 7165b77a81 ("scripts: edtlib:
refactor for first class bindings") introduced a Binding class.
Its child_binding instance attribute has a compatible which can be
None. Adjust this behavior so the child Binding object has the same
compatible as the parent binding which ultimately has a compatible.
Without this, sanitycheck's expr_parser is doing some matching on
compatibles in child nodes that is producing unexpected results.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The child_binding object should default to having a path and
compatible that matches the parent's. Mark it as xfail because the
compatible part is failing.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The filters were updated to match the 3.3.0 generated text, so update
the sphinx requirement to exclude versions that use different text.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This is a convenience function for creating a bunch of Binding objects
from files in a directory.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
skips due to ram/rom overflow were captured as failures. Fix this and
count them correctly as skips.
Fixes#29412
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add date and if a commit should be considered for weekly testing.
This will still work with the old format.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add the ability to mark a property as 'deprecated' to get a warning that
it will be removed in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Breathe>=4.23.0 brings in basic xrefitem rendering support and fixes
issues parsing anonymous struct/unions. This version also adds a config
knob for showing or hiding enumerator values, so set it to generate
documentation compatible with previous versions.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This commit adds posibility to save zephyr version in the xml reports.
It adds 'properties' attribute to testsuite attribute. 'properties'
can contain multiple 'property' attributes. Zephyr version is added
as such 'property'.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
It's not clear why this error is here. The "formats" array seems to
be limited to "bin" and "hex" only, but every signing tool is going to
have its own idea of what format to emit and what ingredients need to
be used to do that.
In particular, rimage (used for the Intel Audio DSPs) doesn't use nor
generate zephyr.bin (it's very large), so it trips over this failure.
Just present the possibly-empty list of output formats to the Signer
object and let it make the decision about whether an empty formats
list is an error.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Avoids parsing the whole "before to now" commits after rebase.
Now, we just parse all commits since first commit of the branch
compared to master, each timer either at first push, forced push,
forced push after rebase.
Fixes#28509
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
_prop_val comment referred to one of the arguments called "optional"
however the code has changed to call that argument "required" now. Fix
up the comment block to use the correct argument name and semantics of
that argument.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add two new types: Binding and PropertySpec.
- Binding is a first-class abstraction for a devicetree binding
file as defined by a YAML file in the Zephyr syntax.
- PropertySpec is a helper type which represents a property
definition within a Binding.
Make the Binding constructor a new entry point to the library. This
enables users to deal with bindings as standalone entities, apart from
how they characterize a particular devicetree.
Rework the EDT and Node internals that deal with bindings as dict
values to use the Binding type instead. To make this less ambiguous,
use the variable name 'raw' when we're dealing with a binding as it's
parsed from YAML, and 'binding' when we're dealing with a Python
Binding object.
This commit drops support for the following legacy bindings keys
- '#cells': use '*-cells' instead (e.g. 'gpio-cells', 'pwm-cells')
- "child-bus: foo" and "child: bus: foo": use "bus:" instead
- "parent-bus" and "parent: bus: ": use "on-bus:" instead
Officially, legacy bindings have been gone since
6bf761fc0a ("dts: Remove support for deprecated DTS binding
syntax"), so this is vestigial code, and I couldn't find any in-tree
users.
It also drops the convention in this file that ""-strings are
preferred.
I honestly don't understand why this was ever enforced; the file
itself admits single quotes are common in Python and we use them
elsewhere in Zephyr's Python code.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If we get a build failure with the -M option we get the following:
TypeError: 'NoneType' object is not iterable
This was due to having the default value of additional_keep in
cleanup_artifacts being None instead of an empty array.
Fixes#29376
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To make the artifacts we keep around for --device-testing -M re-usable
we need to sanitize any aboslute build paths that might exist in
CMakeCache.txt or zephyr/runners.yaml.
This allows us to build the tests to run on one CI system and run the
tests on another system that has the board(s) connected to it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we specify --device-testing and -M make it so that the resulting
artifacts are usable to run with device-testing again. This means
keeping around the zephyr binary images (zephyr.{bin, hex, elf}) and
a few files so 'west' can function for flashing (CMakeCache.txt and
zephyr/runners.yaml).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According to west-flash option description it's allowed to use
west-flash without parameter:
> There are three ways this option is used.
> 1) bare: --west-flash
> 2) with a value: --west-flash="--board-id=42"
> 3) Multiple values: --west-flash="--board-id=42,--erase"
However, we don't allow to west-flash to be without parameter
when we verify sanitycheck arguments. Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Fixes: #29235
This commit ensures that roots are being converted to posix paths.
This fixes the issue where windows style path (containing `\`) would
result in DTS dependency file to contain mixed style path separator and
thus causing Ninja to re-invoke CMake in an endless loop.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add the first API functions that directly deal with node dependency
ordinals as determined by edtlib:
- DT_DEP_ORD(node_id): node_id's ordinal
- DT_REQUIRES_DEP_ORDS(node_id): list of dep ordinals for node_id's
direct dependencies
- DT_SUPPORTS_DEP_ORDS(node_id): list of dep ordinals for nodes
depending directly on node_id
- DT_INST_ equivalents
This is not meant to be an exhaustive set of macros related to
dependency ordinals; rather, it's a starting out point meant to enable
initial struct device dependency tracking work. We can add more if
needed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The west build command has historically tried not to rm -rf
directories that don't look like zephyr build directories. The way it
does this is by checking for the presence of a CMake cache
with a Zephyr-specific variable (ZEPHYR_TOOLCHAIN_VARIANT) in it.
The problem with this approach is that if the build system fails
before this cache variable is set, the directory doesn't look like a
zephyr build directory, and therefore west build won't make it
pristine even with --pristine=always, even though build directories
resulting from failed runs like that are almost certainly
irrecoverably broken and need to be made pristine before anything will
work.
This leads to users having to rm -rf their directories manually, which
is not so nice.
To avoid this from happening, just check for ZEPHYR_BASE, which is
set early on in ZephyrConfig.cmake in 'modern' zephyr build systems.
Keep the ZEPHYR_TOOLCHAIN_VARIANT check in place for compatibility.
We could consider being less selective and just using shutil.rmtree()
whenever we have --pristine=always, but that would be a bigger
behavioral change than I'm comfortable doing without a good reason.
Fixes: #28876
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If we run with --cmake-only we get the following:
`ERROR - Unknown status None`
Fix this by treating no status set as "passed" for the --cmake-only
case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
BOSSA takes the offset within flash memory, not the absolute address.
This doesn't matter on most boards as the flash starts at zero but
does matter on the Due as the flash starts at +512 KiB.
Signed-off-by: Michael Hope <mlhx@google.com>
Each controller node in a phandle-array may set the number of cells in
a specifier as any nonnegative integer. Currently, we don't allow
this in edtlib in the case where there are multiple controllers in a
phandle-array property all of which have 0 cells in the relevant
specifier, which is not correct. Fix this, add a regression test, and
improve the error message while we are here.
Fixes: #28709
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a lookup table for finding a node by its dependency ordinal.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Make the scc_order method a property instead. This is in keeping with
the "General biased advice" at the top of file.
The actual order is therefore lazily initialized in this commit and
the order is not computed by the time __init__() returns. The next
commit will invoke scc_order by the time the constructor returns.
This is preparation work for adding a lookup table from dependency
ordinals to nodes. The combination of these two changes will make
intializing that lookup table a bit easier.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We don't want to support cyclic dependency structures, because it
means that Node objects cannot have dep_ordinal attributes as they are
currently documented to possess unconditionally.
Nevertheless, we have some in our tests. Remove them by extracting the
/props/ctrl-X nodes to the same level as the /props nodes. This breaks
a cycle caused by:
- /props/ctrl-X nodes depend on /props because of the parent/child
relationship
- /props depends on /props/ctrl-X because it refers to them by phandle
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This patch fixes the ZeroDivisionError which can
occur during percantage of test execution reporting.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Use the pytest test framework in the dtlib.py and edtlib.py test
suites (testdtlib.py and testedtlib.py respectively).
The goal here is not to change what is being tested. The existing test
suite is excellent and very thorough.
However, it is made up of executable scripts where all of the tests
are run using a hand-rolled framework in a single function per file.
This is a bit all-or-nothing and prevents various nice features
available in the de-facto standard pytest test framework from being
used.
In particular, pytest can:
- drop into a debugger (pdb) when there is a problem
- accept a pattern which specifies a subset of tests to run
- print very detailed error messages about the actual and expected
results in various traceback formats from brief to very verbose
- gather coverage data for the python scripts being tested (via plugin)
- run tests in parallel (via plugin)
- It's easy in pytest to run tests with temporary directories
using the tmp_path and other fixtures. This us avoid
temporarily dirtying the working tree as is done now.
Moving to pytest lets us leverage all of these things without any loss
in ease of use (in fact, some things are nicer in pytest):
- Any function that starts with "test_" is automatically picked up and
run. No need for rolling up lists of functions into a test suite.
- Tests are written using ordinary Python 'assert'
statements.
- Pytest magic unpacks the AST of failed asserts to print details on
what went wrong in really nice ways. For example, it will show you
exactly what parts of two strings that are expected to be equal
differ.
For the most part, this is a pretty mechanical conversion:
- extract helpers and test cases into separate functions
- insert temporary paths and adjust tests accordingly to not match
file names exactly
- use 'assert CONDITION' instead of 'if not CONDITION: fail()'
There are a few cases where making this happen required slightly
larger changes than that, but they are limited.
Move the checks from check_compliance.py to a new GitHub workflow,
removing hacks that are no longer needed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
So far 'tests' and 'samples' directories were matched only when they
were first directories in path hierarchy. This doesn't work when running
sanitycheck from directory other than Zephyr source code root.
Match any directory in path hierarchy, similar how file is matched
currently. That way sanitycheck can be executed from outside of Zephyr
source code directory.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add '--coverage-basedir BASEDIR' argument, which can be used to specify
source code base directory other than default Zephyr root directory.
This is mainly useful for projects built on top of Zephyr, where
sanitycheck is used for unit testing application code.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Use --filter=runnable for example to limit the tests being built to
those which actually can run on a device or a emulation platform.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
build_only was being used in different contexts and was confusing, so
clean this up and in some places just set if a test is runnable, a
testcase should always be buildable if the filters are matching.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Inspect the hex file with intelhex, and fail if the hex file has any
contents in the UICR area(s).
family == 'NRF52' still always does --sectoranduicrerase, but this
option is not available on other families.
Add --force command line option to proceed with flashing instead of
failing.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Only create the dir and file if we have actual "content" that will
exist in testcase_extra.conf. This is to reduce a bit of
noise/footprint in the sanitycheck output dir.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we kill qemu because of a timeout, capture this as the reason instead
of reporting the exit code.
Fixes#28040
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Breathe 4.21.0 brings a few interesting features that improve the
generated documentation:
* A new `separate_member_pages` config option that patches issues in the
Doxygen XML generated when SEPARATE_MEMBER_PAGES option is YES.
* A new rST verbatim mode that allows producing inline elements.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
This undo's commit dd65f7c38a that changed how we sorted tests to get
better distribution from a qemu running point of view. However we now
have some tests that take a long time to build and we end up loading
build machines we all the long running tests.
Lets try going back to sorting by platform and see how that behaves with
the new CI environment.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Commit 3124c02 ("cmake: flash/debug: refactor runner configuration")
changed the way the hex_file and elf_file inputs in the RunnerConfig
object are created. In particular, they are now host-style paths.
This breaks flashing with openocd on Windows, which doesn't handle that
properly. Fix that by "casting" the internal hex_file and elf_file
attributes to POSIX paths.
Fixes: #28138
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This code had one purpose only, feed timing information into a test and
was not used by anything else. The custom trace points unfortunatly were
not accurate and this test was delivering informatin that conflicted
with other tests we have due to placement of such trace points in the
architecture and kernel code.
For such measurements we are planning to use the tracing functionality
in a special mode that would be used for metrics without polluting the
architecture and kernel code with additional tracing and timing code.
Furthermore, much of the assembly code used had issues.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
As proposed by Andy Ross let's pick a single set of rules
and syntax that work.
Suggested-by: Andy Ross <andy@plausible.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
I've repeatedly seen that people are not aware of the existence of
this configuration option.
I've been using build.pristine=auto daily for years and never had any
problems. I've also asked around on Slack a couple of times over
various points to see if anybody objects to making this change. Nobody
has, so let's just turn it on by default.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Tell the EDT instance that properties of the /zephyr,user node should
be generated based on the binding types inferred from the property
content.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Clean up of devicetree tooling removed generation of information
present in devicetree in nodes that have no compatible, or for extra
properties not defined by a binding. Discussion proposed that these
properties should be allowed, but only in a defined node /zephyr,user.
For that node infer bindings based on the presence of properties.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
By default, subprocess.Popen commands are supplied as a list of strings.
Using split() allows to use command with arguments, for example it is
possible to use following:
sanitycheck ... \
--device-serial-pty="set_ambient read_terminal.py" \
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit message is a bit of a novel mostly:
- because the issues involved are longstanding
- as evidence this is not a capricious refactoring
The runners.core.RunnerConfig Python class holds common configuration
values used by multiple runners, such as the location of the build
outputs and board directory.
The runners code, first written in 2017-ish, replaced various shell
scripts that got this information from the environment. Avoiding
environment variables was a requirement, however. It's ghastly to set
environment variables for a single command invocation on Windows, and
the whole thing was part of a larger push to make Zephyr development
on Windows better.
I had a hammer (the argparse module). Finding a replacement naturally
looked like a nail, so the information that ends up in RunnerConfig
got shunted from the build system to Python in the form of 'west
flash' / 'west debug' command line options like '--board-dir',
'--elf-file', etc.
I initially stored the options and their values in the CMake cache.
This was chosen in hopes the build system maintainer would like
the strategy (which worked).
I knew the command line arguments approach was a bit hacky (this
wasn't a nail), but I also honestly didn't have a better idea at the
time.
It did indeed cause issues:
- users don't know that just because they specify --bin-file on the
command line doesn't mean that their runner respects the option, and
have gotten confused trying to flash alternate files, usually for
chain-loading by MCUboot (for example, see #15961)
- common options weren't possible to pass via board.cmake files
(#22563, fixed partly via introduction of runners.yaml and the west
flash/debug commands no longer relying on the cache)
- it is confusing that "west flash --help" prints information about
openocd related options even when the user's board has no openocd
support. The same could be said about gdb in potential future use
cases where debugging occurs via some other tool.
Over time, they've caused enough users enough problems that
improvements are a priority.
To work towards this, put these values into runners.yaml using a new
'config: ...' key/value instead of command line options.
For example, instead of this in the generated runners.yaml file:
args:
common:
- --hex-file=.../zephyr.hex
we now have:
config:
hex_file: zephyr.hex
and similarly for other values.
In Python, we still support the command line options, but they are not
generated by the build system for any in-tree boards. Further work is
needed to deprecate the confusing ones (like --hex-file) and move the
runner-specific host tool related options (like --openocd) to the
runners that need them.
Individual board.cmake files should now influence these values by
overriding the relevant target properties of the
runners_yaml_props_target.
For example, instead of:
board_runner_args(foo "--hex-file=bar.hex")
Do this:
set_target_properties(runners_yaml_props_target PROPERTIES
hex_file bar.hex)
This change additionally allows us to stitch cmake/mcuboot.cmake and
the runners together easily by having mcuboot.cmake override the
properties that set the hex or bin file to flash. (The command line
arguments are still supported as-is.)
Combined with 98e0c95d91ae16f14e4997fb64ccdf0956595712 ("build:
auto-generate signed mcuboot binaries"), this will allow users to
build and flash images to be chain loaded by mcuboot in a way that
avoids calling 'west sign' and passing 'west flash' its output files
entirely.
While we are here, rename runner_yml_write to runners_yaml_append().
This function doesn't actually write anything, and we're here
refactoring this file anyway, so we might as well improve the
situation while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The 'runner_config' variable name is particularly misleading because
there is a class called RunnerConfig, and that variable does not
contain one.
Rename it to 'runners_yaml' since it contains the parsed contents of
the runners.yaml file. Rename the variable that refers to the path
itself to 'runners_yaml_path'. No functional changes expected.
This is prep work for redoing how actual RunnerConfig objects get
made.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Before venturing off into refactoring land, let's make sure we have a
type checker running on the main APIs used by the various runners so
we don't miss anything obvious.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use mypy to type check the runners package.
The test procedure is now annoying enough to replicate locally that
I'm going to wrap it in a script. Do this for both UNIX and Windows
environments by writing that script in Python.
Keep the GitHub workflow up to date so we now get mypy results in CI.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Colorama needs to be initialized, and for colors to display correctly on
Windows one needs to use the `USES_TERMINAL` option in CMake.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Certain symbols do not contain a valid path, instead showing
`<built-in>` in the filename attribute. This leads to the resolve() call
failing on Windows, since the `<>` characters are not allowed in
filenames there. Fix this by catching the exception and skipping the
call in that case.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
2 scripts are provided.
- find_functions.cocci (name probably sucks...)
- find_dev_usage.cocci (ditto...)
find_functions.cocci can patch files where device instance are not
const.
Then it is used to generate the function database:
./scripts/coccicheck --mode=report --jobs=1 \
--cocci=scripts/coccinelle/find_functions.cocci \
--sp-flag="--include-headers" ./
Then, find_dev_usage.cocci will check if the const qualifier is, or
might be lost in a function call.
For instance:
./scripts/coccicheck --mode=report --jobs=1 \
--cocci=scripts/coccinelle/find_dev_usage.cocci \
--sp-flag="--include-headers" drivers/i2c
Which will output a WARNING on non-zephyr functions calls with a device:
./drivers/i2c/i2c_cc13xx_cc26xx.c:393:5-8: WARNING: in i2c_cc13xx_cc26xx_pm_control calling cb param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_mcux_lpi2c.c:205:40-43: WARNING: in mcux_lpi2c_init calling LPI2C_MasterTransferCreateHandle param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_nrfx_twi.c:258:5-8: WARNING: in twi_nrfx_pm_control calling cb param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_nrfx_twi.c:202:22-25: WARNING: in init_twi calling nrfx_twi_init param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_mcux.c:187:38-41: WARNING: in i2c_mcux_init calling I2C_MasterTransferCreateHandle param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_mcux_flexcomm.c:184:43-46: WARNING: in mcux_flexcomm_init calling I2C_MasterTransferCreateHandle param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_nrfx_twim.c:232:5-8: WARNING: in twim_nrfx_pm_control calling cb param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_nrfx_twim.c:174:8-11: WARNING: in init_twim calling nrfx_twim_init param with dev, check if const qualifier is not lost
./drivers/i2c/i2c_rv32m1_lpi2c.c:246:6-9: WARNING: in rv32m1_lpi2c_init calling LPI2C_MasterTransferCreateHandle param with dev, check if const qualifier is not lost
Or:
./scripts/coccicheck --mode=report --jobs=1 \
--cocci=scripts/coccinelle/find_dev_usage.cocci \
--sp-flag="--include-headers" drivers/ieee802154
Which will output an ERROR on using a zephyr function that looses the
const qualifier:
drivers/ieee802154/ieee802154_rf2xx.c:778:3-6: ERROR: in rf2xx_init calling k_thread_create param with dev, loosing const qualifier, please wrap
drivers/ieee802154/ieee802154_nrf5.c:477:19-22: ERROR: in nrf5_init calling k_thread_create param with dev, loosing const qualifier, please wrap
drivers/ieee802154/ieee802154_cc1200.c:819:3-6: ERROR: in cc1200_init calling k_thread_create param with dev, loosing const qualifier, please wrap
drivers/ieee802154/ieee802154_mcr20a.c:1443:3-6: ERROR: in mcr20a_init calling k_thread_create param with dev, loosing const qualifier, please wrap
drivers/ieee802154/ieee802154_cc2520.c:1116:3-6: ERROR: in cc2520_init calling k_thread_create param with dev, loosing const qualifier, please wrap
drivers/ieee802154/ieee802154_cc13xx_cc26xx.c:439:32-35: ERROR: in ieee802154_cc13xx_cc26xx_data_init calling k_thread_create param with dev, loosing const qualifier, please wrap
ISSUE:
- Is it possible to run a set of rules first on all the code, and then
another set, both sets being in the same .cocci file?
Would be nice to have all at once.
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The k_object API associates mutable state structures with known kernel
objects to support userspace. The kernel objects themselves are not
modified by the API, and in some cases (e.g. device structures) may be
const-qualified. Update the API so that pointers to these const
kernel objects can be passed without casting away the const qualifier.
Fixes#27399
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fix the case where we have no ztest test_* testcases and reports were
missed. This now makes sure we do not report the parent testcase when
there are individual test_* results.
Fixes#27765
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
add argument --pre-script to specify a pre script. This will be
executed before device handler open serial port and invoke runner.
Currently, pre_script can only get from hardware.map file. just like:
./scripts/sanitycheck --hardware-map xxx.map
and set pre_script in xxx.map file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
In some cases it might be a good idea to reset the board for real to
make sure it is completely recovered from some failed state (simple
re-loading of the application binary or even Elf file contents doesn't
affect most of internal CPU states so doesn't help in recovery,
see https://github.com/zephyrproject-rtos/zephyr/issues/25022 &
https://github.com/zephyrproject-rtos/zephyr/issues/26665).
And so we may want to utilize some external utility which triggers the
hard reset (in case of ARC boards it is
https://github.com/foss-for-synopsys-dwc-arc-processors/rff-ftdi-reset).
So we need to have a way to execute an external command before each and
every test.
Now given we already have quite some call-backs we try to use them
before re-inventing the wheel. And pre_script seem to be a good option
with just on minor note - it is called after serial port gets open.
And while in some cases it might be OK if serial port on the board is
not affected by the board's reset, if it is affected we'll be losing
connection on reset (and that's the case with ARC boards BTW as the
FTDI USB-to-Serial IC is also wired to the reset signal on most of
the boards). That said we just move invocation of pre_script before
opening the serial port and everything should be good now.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
By default show reports based on last release. Fix a few other issues
where we had 0 values and were dividing by zero.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit improves Zephyr modules support in CMake.
All Zephyr modules will now have a corresponding
`ZEPHYR_${module_name}_MODULE_DIR` set, regardless of whether they
define a cmake folder in module.yml.
This results in:
`ZEPHYR_${module_name}_MODULE_DIR` defined for all modules and refers to
the root of the modle.
`ZEPHYR_${module_name}_CMAKE_DIR` defined for modules that specifies
cmake in module.yml, or is having both a CMakeLists.txt and Kconfig file
in the zephyr folder.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit has no functional changes but is simply a cleanup so that
flake8 will pass without warnings.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This will only build/run on emulation platforms.
The decision is made based on the value of the 'simulation' key in the
platform yaml file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is needed for sanitycheck hardware maps which take the serial
number directly from USB metadata.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Adds some code to allow QEMU to crash without failing the test.
This is required for testing coredump code as it will certainly
cause QEMU to crash.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is a potential that QEMUHandler.handle() returns before
the testing harness finishes processing all the output from QEMU.
Simply wait for the harness thread to finish before returning.
Also, fix the return code in the debug message as it should be
the return code from Popen().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary bits in arch code, and Python scripts
to enable coredump support for ARM Cortex-M.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a very primitive coredump mechanism under subsys/debug
where during fatal error, register and memory content can be
dumped to coredump backend. One such backend utilizing log
module for output is included. Once the coredump log is converted
to a binary file, it can be used with the ELF output file as
inputs to an overly simplified implementation of a GDB server.
This GDB server can be attached via the target remote command of
GDB and will be serving register and memory content. This allows
using GDB to examine stack and memory where the fatal error
occurred.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 8d7bb8ffd8 refactored
device structures which changed some of the linker sections:
"devconfig" was removed, and "devices" was added. However,
the list in sanitycheck's size calculator was not updated,
which results in sanitycheck complaining about unrecognized
sections when doing footprint.
Also, a few sections have been renamed (with added suffix
"_area") due to introduction of Z_ITERABLE_SECTION_RAM/ROM
macros. There are also some missing section names.
Fixes the issue by adding the missing sections names, and
updating existing ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When MCUBoot is built using the swap-move strategy, the secondary slot
can be one sector smaller than the primary slot, because the primary
slot's last "useful" image sector must be "reserved" for the move
operation; this impacts the generation of padded images, so when
signing an image, the proper size to use is the secondary slot's,
unless a secondary image is not defined which is the case when using
single image DFU.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
The extra empty line broke the "ninja hardenconfig" on my machine with
Python 3.7.5, it complains:
"
... ...
File "/home/zephyrproject/zephyr/scripts/kconfig/hardenconfig.py",
line 46, in compare_with_hardened_conf
name = row[0]
IndexError: list index out of range
FAILED: CMakeFiles/hardenconfig
"
The csv.reader reads this empty line and gets an empty list which will
not be successfully "de-referenced". Removing it to improve the
out-of-box experience when pepople try out the hardening options.
Signed-off-by: Wenbo Yang <wenbo.yangcn@gmail.com>
This squashes and applies the Linux diffs to scripts/checkpatch.pl
between Linux commit 16fbf79b0f83bc75 ("Linux 5.6-rc7") and
9123e3a74ec7b93 ("Linux 5.9-rc1") except for commits identified below.
The last 1000 commits to Zephyr master were compared for checkpatch
output differences between the previous Zephyr version and this
version. One new diagnostic about function declarations with an empty
parameter-list was introduced (FUNCTION_WITHOUT_ARGS). The text of an
existing diagnostic was changed (DT_SPLIT_BINDING_PATCH). The text of
LONG_LINE diagnostics was enhanced to provide the actual line length.
Linux commit dfa05c28ca7ffc0a ("checkpatch: remove email address
comment from email address comparisons") was removed because
differences in the scripts resulted in false signed-off-by check
diagnostics when a full name included characters not in Basic Latin,
due to changes in how the author name was extracted. Earlier upstream
changes not integrated into Zephyr may be required.
Linux commit b95692f8b3000166 ("checkpatch: prefer fallthrough; over
fallthrough comments") was removed because Zephyr doesn't support the
upstream pseudo keyword.
Linux commit bdc48fa11e46f867 ("checkpatch/coding-style: deprecate
80-column warning") was edited to not actually change the 80-column
maximum line limit as this change has not been mooted for Zephyr.
Linux commit ced69da1db0b57bb ("checkpatch: fix CONST_STRUCT when
const_structs.checkpatch is missing") was edited to the CONST_STRUCT
file as that's not supported in Zephyr.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add support for the J-Link Commander "-NoGui 1" command line parameter
in the West J-Link runner.
This command line parameter suppresses GUI dialogs (except for license
dialogs) in J-Link Commander starting from v6.80.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If a runner supports the --erase option, make it so that the user can
add --no-erase to the command line to explicitly disable it.
Add a diagnostic at info() level whenever this option is requested.
The intent of this commit is to make it more obvious when a mass erase
was requested, especially in situations (like MCUboot with
CONFIG_MCUBOOT_TRY_MASS_ERASE=y) where this option may be turned on by
default.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #27375
This is a cleanup of the Zephyr CMake package export.
The code has been simplified so that the export now happens through a
CMake script. This avoids several generated CMake build files compared
to previous export mode, and thus removes the need for a CMake pristine
script.
A benefit of this cleanup is that it also fixes#27375.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This patch should improve couting and reporting of the number
of passed/skipped tests.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Avoid use of the cached_runner_config() helper, which we have a TODO
item to get rid of. Adjust the output and do some other minor
improvements.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Rolling yet another parser turns out to be the best way to let west
extensions respond to Kconfig values. See source code comments in the
patch for details.
The sanitylib library has some similar functionality but it isn't
exactly the same, and it gets strings wrong. For example, that parser
can't handle this option:
CONFIG_FOO="he said \"no\" to me"
This one can, and it has a couple of other features we'll find useful
for west extensions eventually besides.
(Not to mention that sanitylib also rolled its own CMake cache parser,
which also exists in west_commands.)
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use anytree module to display tree and to allow easy exporting into
json.
Add option to export results into a json file.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In DWARF 4, e.g. ARC Metaware toolchain, DW_AT_count is
used not DW_AT_upper_bound. We should consider this corner
case.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
When running with --test-only we get:
Traceback (most recent call last):
File "./scripts/sanitycheck", line 1168, in <module>
main()
File "./scripts/sanitycheck", line 1160, in main
options.only_failed)
File "scripts/sanity_chk/sanitylib.py", line 2543, in save_reports
self.xunit_report(filename + ".xml", full_report=False, append=only_failed)
File "scripts/sanity_chk/sanitylib.py", line 3220, in xunit_report
return fails, passes, errors, skips
UnboundLocalError: local variable 'fails' referenced before assignment
This is due to the fact that selected_platforms was not set.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In the junit output the attribute containing the number of skipped tests
must be named "skipped" instead of "skip".
See e.g. https://github.com/junit-team/junit5/blob/main/platform-tests/
src/test/resources/jenkins-junit.xsd#L95
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
The extra empty line broke the "ninja hardenconfig" on my machine with
Python 3.7.5, it complains:
"
... ...
File "/home/zephyrproject/zephyr/scripts/kconfig/hardenconfig.py",
line 46, in compare_with_hardened_conf
name = row[0]
IndexError: list index out of range
FAILED: CMakeFiles/hardenconfig
"
The csv.reader reads this empty line and gets an empty list which will
not be successfully "de-referenced". Adding extra check to skip the
empty lines.
Signed-off-by: Wenbo Yang <wenbo.yangcn@gmail.com>
Running check_compliance on a PR before submitting it can avert
embarrassing mistakes. Ensure the packages needed to do so are
installed along with all the others.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Currently '--coverage-tool gcovr' results in using lcov. Fix that to use
gcovr, as requested by user.
Fixes: f6462a3a8c ("sanitycheck: get rid of global VERBOSE")
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Sanitycheck discards test instances if a set of given coditions
is not fulfilled. This leads to empty test results for these
instances. This can introduce ambiguity with results that are
missing due to some bugs in the framework. This commit fills
the results for skipped tests with 'skipped' states and provides
the reason for filtering them out in the msg field. The commit
also fixes the way sanitycheck counts and reports tests/test cases
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Fixes: #25215
This commit introduces the possibility of defining ROOTs in a Zephyr
module and have it automatically appended to list of other ROOTs.
Supported with this commit:
- BOARD_ROOT
- SOC_ROOT
- DTS_ROOT
- ARCH_ROOT
In order to support this in Zephyr module files, the detection of west
has been moved to dedicated west.cmake file and included immediately
after python.cmake.
Also the inclusion of zephyr_modules.cmake has moved before first use
of BOARD_ROOT.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces support for multiple SOC_ROOT.
This means that additional SOC_ROOTs specified using -DSOC_ROOT as
argument to CMake will be forming a list together with ${ZEPHYR_BASE}.
This allows for greater flexibility, as developers can now specify
multiple out-of-tree SoCs and not worry about the SoC used for the
board they compile for.
Also it avoid code, such as:
if(BOARD STREQUAL my_board_using_out_of_tree_soc)
set(SOC_ROOT some/out/of/tree/soc/path)
endif()
in application CMakeLists.txt.
Finally, allowing multiple SOC_ROOTs prepares for specifying SOC_ROOTs
in Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When passing a using --hardware-map, sanitycheck would ignore extra
args passed via --west-flash, such as --west-flash="--erase".
This is because the command with the extra args was overwritten by the
command with the runner info from the hardware map.
This patch merges those code paths so they are aware of each other and
of --west-runner.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Before sanitycehck was removing all `test_` chars in test cases'
names. This test has to be modify to work with the improved behavior
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
This commit limits the removal of `test_` from test case name
to only the first occurance. There are test cases with `test_`
also in the middle of their names and removing it couses mismatches
between extracted testcases and the names obtained when passing
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
These stacks are appropriate for threads that run purely in
supervisor mode, and also as stacks for interrupt and exception
handling.
Two new arch defines are introduced:
- ARCH_KERNEL_STACK_GUARD_SIZE
- ARCH_KERNEL_STACK_OBJ_ALIGN
New public declaration macros:
- K_KERNEL_STACK_RESERVED
- K_KERNEL_STACK_EXTERN
- K_KERNEL_STACK_DEFINE
- K_KERNEL_STACK_ARRAY_DEFINE
- K_KERNEL_STACK_MEMBER
- K_KERNEL_STACK_SIZEOF
If user mode is not enabled, K_KERNEL_STACK_* and K_THREAD_STACK_*
are equivalent.
Separately generated privilege elevation stacks are now declared
like kernel stacks, removing the need for K_PRIVILEGE_STACK_ALIGN.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We have been doing an AND comparison instead of an OR. AND does exclude
way to many testcases where multiple tags are being used.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use --integration testing for CI to limit execution and builds on
platforms that actually provide most of the coverage instead of blindly
building/running on all available platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On some NXP LPC MCUs (such as LPC11U6x), a valid firmware image must
include a checksum in the 7th entry of the ARM Cortex-M0 exception
vector table. This checksum is verified by the bootloader.
The lpc_checksum.py python script allows to insert this checksum into
the firmware images (BIN and HEX formats).
Project page: https://github.com/basilfx/lpc_checksum
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
Make net_if a kernel object with type K_OBJ_NET_IF so that we
can restrict access to it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
instances that do not run will have no results (beside the fact they
built successfully), so log those as such.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a cargo-culted attempt to make an error observed in poorly
understood CI circumstances go away when loading edt.pickle, by making
edtlib visible in sys.modules before loading the pickle file.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adding the get_maintainer.py script
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Consolidate creation of edtlib.EDT objects from a build directory's
devicetree into one place by loading it from build/zephyr/edt.pickle
everywhere. A previous commit creates edt.pickle from gen_defines.py.
In addition to probably speeding things up slightly by not reparsing
the devicetree, the main benefit of this approach is creating a single
point of truth for the bindings directories and warnings
configuration, meaning we don't have to worry about them getting out
of sync while being passed around between devicetree creation and
usage time.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Increased minimal pyelftools version to 0.26 else
scripts/footprint/size_report will fail to import LocationExpr from
elftools.dwarf.locationlists
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
I can never remember what the contents of the kconfigfunctions dict is
and have to look it up every time. I suspect I'm not alone, and not
everyone who uses these will know how to look up the answer. Add a
comment explaining the value.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
There is already a way to check if a node is enabled based on its node
label, but we don't have an equivalent way to do that for a path or an
alias. Add them. These rely on the same underlying edtlib machinery to
get their jobs done, but are being treated differently within Kconfig
in order to match distinctions between paths and aliases made in the
devicetree.h API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This adds CONFIG_BT_CONN_DISABLE_SECURITY which can be used to disable
security checks for incoming requests enabling to test accessing GATT
attributes and L2CAP channels that would otherwise require
encryption/authentication in order to be accessed.
It depends on BT_TESTING to indicate to the users that this is a
testing feature which shall not be used in production.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
serial-pty is an extension that is not supported in the hardware map, so
we need to work around the fact that it is not part of the map when
dealing with normal serial.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add option to provide to sanitycheck argument for creating
pseudoterminal. Used with hardware without serial console connected.
A pseudoterminal is used to make a sanitycheck believe that it
interacts with a terminal although it actually interacts with the
script.
E.g "sanitycheck --device-testing --device-serial-pty <script>"
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Support running/building only specific tags and ignoring everything
else.
Adding this to a platform yaml file will enable tests with one of of
tags listed to be executed on the platform.
This is useful for special platform configurations used for testing
specific features for example.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactor subfolder_list.py to enable unit testing. This means split the
implementation into separate logical functions. Additionally, modify the
code to improve PEP 8 compatibility and pylint result.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
The projects variable needs to be initialized with the list of modules
provided via cmd-line arguments.
This is a regression introduced by
ef3c5e5516.
Fixes#26948.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
--warnings-as-errors was basically doing nothing, it is the default.
Replace this with an option to disable erroring on warning:
-W, --disable-warnings-as-errors
Fixes#26910
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We still have cases where qemu crashes are not being correctly captured
in the on-screen summary, however they are captured in the final
generated report.
Fixes#26679
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
...instead of GNU binutils to extract DWARF information.
This is now a bit more portable across OS and toolchain.
One bouns is that this nows with on qemu_x86_64.
A few differences are:
() z_mrsh_* which are aliases to handler_no_syscalls() are now
dropped as they are mapped to the same address, so that they
are not counted multiple times.
() Static functions and variables with same names should now be
attributed to the correct source files instead of being
accumulated into the same symbol of one file (e.g. multiple
thread_entry() in kernel tests).
() The totals for ROM and RAM are calculated from the
corresponding sections. Previous script includes the debug
sections as total ROM size which is not entirely correct.
Fixes#22996
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
restore how --only-failed works by allow rebuilds in case of build
errors, however, do not rebuild when --retry-failed is used, which is a
CI usecase and nothing would change in the second iteration.
Fixes#26685
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The `TEXT_SECTION_OFFSET` symbol is used to specify the offset between
the beginning of the ROM area and the address of the first ROM section.
This commit renames `TEXT_SECTION_OFFSET` to `ROM_START_OFFSET` because
the first ROM section is not always the `.text` section.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Updating mock module version to >=4.0.1 as sanitycheck testsuite
might fail in some systems due to old version.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
When running CMake, then Python3 will be used.
This is detected through FindPython3, with a preference for using the
python or python3 in path, if any of those matches the required Python
minimal version in Zephyr.
It is also possible for users to specify a different Python, as example
by using:
`cmake -DPYTHON_PREFER=/usr/bin/python3.x`
However, when running `west` as native command, then west will be
invoked on linux based on the python defined in:
`west` launcher, which could be: `#!/usr/bin/python3.y`
Thus there could be mismatch in Pythons used for `west` and the python
used for other scripts.
This is even worse on windows, where a user might experience:
```
>.\opt\bin\Scripts\west.exe --version
Traceback (most recent call last):
File "C:\Python37\lib\runpy.py", line 193, in _run_module_as_main
"__main__", mod_spec)
...
File "C:\Python37\lib\socket.py", line 49, in <module>
import _socket
ImportError: Module use of python38.dll conflicts with this version of
Python.
```
when testing out a newer Python, but the python in path is still a 3.7.
By importing `west` into zephyr_module.py and by using, as example
`python -c "from west.util import west_topdir; print(topdir())"`
we ensure the same python is used in all python scripts.
Also it allows the user to control the python to use for west.
It also ensures that the west version being tested, is also the version
being used, where old code would test the version imported by python,
but using the west in path (which could be a different version)
If the west version installed in the current Python, and west invocation
is using a different Python interpreter, then an additional help text
is printed, to easier assist users with debugging.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We only have one use of _binding_compat and it doesn't need self, so
just fold it into _init_compat2binding.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We deprecated a number of aspects of the DTS binding syntax in Zephyr
2.1. Remove the support for the deprecated syntax. Remove from docs
about the deprecated syntax as well.
Removed reference in release-notes-2.1.rst to legacy_binding_syntax
since that anchor doesn't exist anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According to our compliance checks, we have 'useless-suppression'
and 'unused-import' on our hands:
W0611: Unused CLoader imported from yaml as Loader
W0611: Unused Loader imported from yaml
I0021: Useless suppression of 'unsubscriptable-object'
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that kconfigfunctions.py is loading the EDT object from a pickle
file, I can't find any other reads of the environment variables it was
previously using to do that.
(The CMake variables with the same names are read in different places;
I'm specifically talking about environment variables here.)
Remove the dead stores.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This saves time and avoids the need to pass additional state around in
the environment to recreate the edt exactly.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We need to save and restore the devicetree data to generate optimized
dependency information later on in the build, in particular during the
final application link.
Make this happen by pickling the EDT object in BUILD_DIR/edt.pickle.
The existence of this file is an implementation detail, so do not add
it to the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We have a use case for saving the EDT object to be able to open it up
again later. It would be convenient to be able to do this with the
pickle module from stdlib.
The only thing stopping us from doing that appears to be the open
reference to sys.stderr that's held the edt object even after
EDT.__init__ exits. However, there doesn't seem to be a need to keep
holding on to this object, and in fact it would be a little bit nicer
to drop the reference in case something else (even in the same Python
process that created it originally) wants the EDT object around, but
might want the warn file closed if its refcount zeroes out.
Just drop the reference at the end of __init__ and make EDT._warn()
throw an exception if it's attempted to be used after the constructor
exits.
Make pickle-ability an API guarantee so we can treat any regressions
as bugs going forward.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
I can't see a good reason to be doing this in the Node class's
unit_addr accessor. Move it up to the edtlib initialization so it only
happens once.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the C LibYAML parser if available, rather than the Python parser. It
is much faster.
This is a clean and rebased version of PR #20210 by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Co-authored-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Deal with qemu crashes and do not register pass status as the default.
In case we do not have a status, report unknown.
This now captures different states from qemu that were not captured
before.
Fixes#26679
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Recent ST boards embed the new ST-Link probe V3.
It is advertised as "STLINK-V3", update sanitylmib to take it
into account.
In handle function, it is proposed to treat it separately as current
"STM32 STLink" as processing might differ in next future (hla_serial
deprecation).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some devices have multiple serial ports, which show as duplicates in the
hardware map. This doesn't work well when using --generate-hardware-map
to regenerate an existing map. E.g. nrf5340pdk_nrf5340_cpuapp by default
prints to the 3rd of 3 devices. If it shows up on /dev/ttyACM0,
/dev/ttyACM1, and /dev/ttyACM2, printout will come on /dev/ttyACM2.
nrf9160dk_nrf9160 also provides 3 devices, but prints to the 1st.
This patch sorts the devices by the serial port and matches multiple
duplicate entries one-to-one to retain the ordering. This way, the
correct device can be given the platform name and the others can be kept
as "unknown" so that --device-testing understands correctly
1) that there is only one device (not 3)
2) where the serial output will come.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
test_reporting_testsuite.py: Adding testcases for reporting
functions of Class testSuite.
test_testsuite_class.py: Testcase for add_instances function
conftest.py: Added fixture for instances_fixture
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Modifying discard_report function to fix the check for
self.discards dictionary in try block. self.discards
is None is dead code which didnot check if the dictionary was
empty. Changed it to if not self.discards.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
- Report build errors as errors, not test failures
- Do not try and build/run tests with build failures
- Fix issue with empty reports when running --only-failed
- Report build errors in the detailed and target reports
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
BOSSAC uses a bootloader, so pull the flash address from DeviceTree or
the config and use if the version of BOSSAC supports offsets.
Signed-off-by: Michael Hope <mlhx@google.com>
BOSSA 1.7 has built-in bootloader offset handling while 1.9.1
requires the user to supply the offset. Add support for both by
sniffing the help output and warn the user if the flags needs adding.
Related to #22062
Signed-off-by: Michael Hope <mlhx@google.com>
This commit creates a list of a phony targets for each runner, that is:
`west_flash_depends`, `west_debug_depends`, and so on.
Those targets has identical dependencies as CMake runner target.
flash, debug, debugserver, attach targets.
As example `ninja flash` correctly ensures dependencies are taken into
consideration before calling `west flash`.
Unfortunately, calling `west flash` directly would not re-run the flash
dependencies, cause `west flash` would only build the default CMake
target.
Now, `west flash` calls the phony `west_flash_depends` target, ensuring
all deps are up-to-date before flashing (unless --skip-rebuild is given)
The same is true for the other mentioned runners.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Missed the case we use in CI where we pre-generate the testcase list and
load it, this was resulting in empty test reports in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
test_testinstance.py: Add testcases to scan file and path for
sub testcases
test_data/testcases: Also added the ztest test files
test_testsuite_class.py: changed get_all_tests() to match
count of sub testcases in ztest files
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
While testing the warnings in scan_file() format is not the same
everytime we run tests
Added sorted with reverse flag so that warnings are same for
every run
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
BT simulator tests run standalone and independent of sanitycheck and
might be triggered by tests that are not managed by sanitycheck, so
leave it alone.
Fixes#26508
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Just changes to the west help output; no functional changes expected.
Make option descriptions lowercase to match the argparse module's
conventions. When multiple sentences are required, move them to parser
prolog/epilog or argument group description sections.
Clarify some points that have confused multiple people.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If we pass --west-flash with no additional argument that was getting
treated the same as if it wasn't passed at all.
Change the check to be based on 'None' to handle the bare --west-flash
case properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
classname in the junit report was not being used correctly since the
beginning. We had the targetname in the classname and put all results in
1 single testsuite.
The new output add 1 single testsuite for each platform and simplifies
the classname so that tests of the same classname can be grouped in
output, producing readable reports.
The current output can be seen here:
https://testing.zephyrproject.org/daily_tests/zephyr-v2.2.0-2533-gdbbf834605/report/index.html
This should much better once we have this change in.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were not handling return code correctly and evaluating
timeouts as a pass. Report failure correctly.
Fixes#26065
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Move the --erase option to core.py from nrfjprog.py and jlink.py,
where it is currently supported.
Using the RunnerCaps option enforcement mechanism introduced earlier,
enforce that it will only be given to runners that support it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Require all implementations to provide a do_create(), a new
ZephyrBinaryRunner abstract class method, and make create() itself
concrete.
This allows us to enforce common conventions related to individual
runner capabilities as each runner provides to the core via
RunnerCaps.
For now, just enforce that:
- common options related to capabilities are always added, so runners
can't reuse them for different ends
- common options provided for runners which don't support them emit
sensible error messages that should be easy to diagnose and support
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We can just call super() instead of super(MyClassName, self). The
original extra verbosity is likely due to old habits of mine from
Python 2 which are no longer necessary, but got copy/pasted around.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
For iterable areas defined with Z_STRUCT_SECTION_ITERABLE(),
the corresponding output section in the linker script is just
boilerplate. Add macros to make these definitions simpler.
Unfortunately, we have a fair number of iterable sections not
defined with Z_STRUCT_SECTION_ITERABLE(), this patch does not
address this.
The output sections are all named <struct name>_area, update
sanitylib.py with this.
sys_sem with no userspace, and k_lifo/k_fifo are special cases
where different data types that are all equivalent need to be
put in the same iterable area. Add
Z_STRUCT_SECTION_ITERABLE_ALTERNATE() for this special case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The argparse module, by default, complains about non-defined
arguments. This prevents passing arguments prefixed with '-'
or '--' to the target script (e.g. calling another Python
script using argparse). This changes the misc-flasher script
so that any arguments not recognized by west will be passed
to the target script.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The start_addr attribute of Stm32flashBinaryRunner is an integer. It
must be converted to a string before being concatenated with a colon and
the (already converted to a string) size to erase or write.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Disables the Debug-Access-Port of the microcontroller after flashing.
If not disabled, the DAP consumes ~1.6mA until the debugger disables it
or a hard power cycle is applied.
The DAP is typically automatically disabled after flashing, but if other
instances of JLink software are running (not connected), it will not be.
The added command resets the value of the CTRL/STAT register of the DAP.
This clears the CSYSPWRUPREQ and CDBGPRWUPREQ bits, leaving the debug
hardware free to power off the appropriate hardware. In no way does it
hinder the ability to later connect to the device for debugging.
This resolves the jlink portion of #26139
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add warning about enabling the options below so that users are
aware that this is a security risk.
- CONFIG_BT_DEBUG_SMP
- CONFIG_BT_DEBUG_KEYS
- CONFIG_BT_OOB_DATA_FIXED
- CONFIG_BT_USE_DEBUG_KEYS
- CONFIG_BT_STORE_DEBUG_KEYS
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
test_testsuite_class.py: Added testcases for load_From_file and
apply_filters functions of Class Testsuite.
conftest.py: Modified class_testsuite fixture to create the
outdir as temporary directory which gets deleted after execution
of testcases.
test_data/sanitycheck.csv: load_from_file function uses this
customized file to load the failed or last run testcases.
test_data/sanitycheck_keyerror.csv: file used by
test_load_from_file function to raise the appropriate error
if there is a keyerror.
scripts/requirements-build-test.txt: added mock & csv python libraries
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
test_testsuite_class.py: Added testcases for add_configurations(),
get_all_testcases(), get_toolchain() and get_platforms() functions
test_data/board_config: board root directory for all board
configurations. This is also to add the platform configurations
in a list which is used for further testing.
conftest.py: Added fixtures for all_testcases_dict (returns a
dictionary of testcases) and platforms_list (returns a list of
all platforms using add_configurations function).
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Convert the description comment at the top of the file to a
documentation string. That string then maybe viewed with the --help
argument. Also, rework a bit the documentation string: remove usage,
since that is provided by the help message of the argparse module.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
MCMUMGR file system management is discouraged in production, just
adding it to the recommendation list.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove Kconfig, linker script, and related bits associated with
CUSTOM_RODATA_LD, CUSTOM_RWDATA_LD, CUSTOM_SECTIONS_LD,
SOC_NOINIT_LD, SOC_RODATA_LD, and SOC_RWDATA_LD options that have been
deprecated since Zephyr 2.2.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the description comment at the top of the file to a
documentation string. That string then maybe viewed with the --help
argument. Also, rework a bit the documentation string.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
This commit introduces the possibility of adding dependencies between
Zephyr modules to ensure that a Zephyr module on which other modules
depends is processed first.
The dependency chain is ordered using a topological sort.
This allows to add dependencies to a zephyr/module.yml as:
build:
cmake: .
depends:
- fatfs
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* add the runner script for metaware debugger(mdb).
* mdb is required for SMP case
* mdb also can provides a GUI interface
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Prior to addition of schema validation running sanitycheck
--generate-hw-map would preserve the value of any field in an existing
map that it didn't update. These fields now cause a parsing error.
Add notes as an optional key where information relevant to the board
can be added to provide useful context (such as which serial port
corresponds to the console, or why a non-standard runner is required).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
probe_id is used as an optional key that overrides id as the source
of board_id when configured to use a runner that is not the default.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
* Tweak west_setup:
- log `west update` to a file to reduce noise in log
- use `west forall` + `git reset` to make sure files are checked out
(this is to handle a possible module cache)
* Output when we start sanity_check. Add a banner for when we run
sanity_check so it's a bit easier to find in console logs
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
test_testinstance.py: Add testcases for check_build_or_run()
create_overlay() and calculate_sizes()
conftest.py: Module for common pytest fixtures
test_data/board_config: Adding test data for board configurations
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Now that we are standardizing C99 integer types we can revert the commit
that warned about C99 type usage.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We now have a low-level function z_dynamic_object_create()
which is not a system call and is used for installing
kernel objects that are not supported by k_object_alloc().
Checking for valid object type enumeration values moved
completely to the implementation function.
A few debug messages and comments were improved.
Futexes and sys_mutexes are now properly excluded from
dynamic generation.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Any data structure declaration tagged with __net_socket will end up
in the kernel object table with type K_OBJ_NET_SOCKET. These all
correspond to objects which are associated with socket file
descriptors and can handle the socket vtable API.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now we can build up lists of data structures matching a list
of particular tags, with __subsystem being just one case.
Relax searches to also look inside C files, since struct
prototypes may be declared there as well.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Certain types of system call validation may need to be pushed
deeper in the implementation and not performed in the verification
function. If such checks are only pertinent when the caller was
from user mode, we need an API to detect this situation.
This is implemented by having thread->syscall_frame be non-NULL
only while a user system call is in progress. The template for the
system call marshalling functions is changed to clear this value
on exit.
A test is added to prove that this works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add test cases that verify various bits and pieces of the legacy
devicetree macros match the new APIs.
Writing these test cases without giving rise to deprecated macro
warnings which might break people's CI if they build with -Werror
requires turning off the __WARN() generation in
devicetree_legacy_unfixed.h. The entire file is deprecated at this
point and must be explicitly enabled with an opt-in Kconfig option, so
there isn't any harm in doing this.
Nevertheless, take a minimally invasive approach to avoiding __WARN()
generation in gen_legacy_defines.py, to avoid the possibility of
breakage. This code is basically frozen anyway, so hacks like this
won't cause maintainability problems since it isn't being actively
maintained.
Use the new tests as fodder for a migration guide from the old API in
the documentation.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Some updates to the reference page for the "core" APIs, and associated
follow-ups in the guides:
- centralize documentation of chosen zephyr nodes in a non-legacy
file, provide a reference to them from the intro page in the guide
- review doxygen docstrings and correct errors for generic APIs
- add introductory text to each section in the API reference
- add missing hardware-specific pages
Documentation for layers built on top of these is mostly left to future
commits, but I do have a smattering of fixes in the guides that I
noticed while I was doing this.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In step 4 of find_kobjects, use func debug instead of debug_die
to dump debug info to avoid dump wrong info.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
If a test instance from .yaml file was skipped due to being on
a filtered list then there are no entries about it in the
sanitycheck_report.xml for a given platform. This commit fills
instance.results with skipped test cases also for skipped instances so
those test cases are visible when the full report is generated. Tested
for ./tests/kernel/mem_protect/userspace on nrf52dk_nrf52832 where
userspace.gap_filling is filtered out.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
It is now possible to add a list of fixture a platform supports which is
matched to testcases requesting fixtures to be avaiable to be able to
run.
For example:
- available: true
connected: true
id: 0240000026334e450015400f5e0e000b4eb1000097969900
platform: frdm_k64f
product: DAPLink CMSIS-DAP
runner: pyocd
serial: /dev/ttyACM9
fixtures:
- gpio_loopback
Fixes#24943
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cleanup fixture processing and allow ztest testcases to support
harness_config with fixture definition.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If environment variables ZEPHYR_BASE or NET_TOOLS_BASE are unset, an
incorrect message is printed saying that "it is set, but it is not a
directory":
$ZEPHYR_BASE is unset
$ZEPHYR_BASE is set, but it is not a directory
$NET_TOOLS_BASE is unset, no net-tools found
$NET_TOOLS_BASE set, but it is not a directory
This patch fixes that issue.
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
test_testsuite_class.py: Add testcases for add_testcases function
of testsuite class in sanitycheck.
test_data/testcases/tests & /samples : Testcase root directory
to add all the testcases & to test add_testcases function.
conftest.py: Module for common pytest fixtures, also used for
passing data from one testcase to another.
Note: conftest.py has a class_testsuite fixture where board_root is
defined as the directory which will be added in a separate PR.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
According to below rule which's from DWARF5 sepc, if the
attribute can't be founded in given DIE, check more entry
associated by DW_AT_abstract_origin.
For the purposes of determining whether a debugging information
entry has a particular attribute (such as DW_AT_name), if
debugging information entry A has a DW_AT_specification or
DW_AT_abstract_origin attribute pointing to another debugging
information entry B, any attributes of B are considered to be
part of A.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
This fix creates class variables SAMPLE_FILENAME & TESTCASE_FILENAME
in Class TestSuite and remove the hardcoded sample.yaml & testcase.yaml
from add_testcases function. This makes testing for sanitylib script
easier so that shippable do not detect the test_data for sanitylib
as actual zephyr testcases.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Add cpu time for QEMUHandler because the guest virtual time
in QEMU icount mode isn't host time and it's maintained by
counting guest instructions, we use QEMU process CPU time to
mostly simulate the time of guest OS.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Sometimes QEMU can't handle SIGTERM signal correctly and just
run as normal, in that case kill -9 QEMU process directly and
leave sanitycheck judge the testing result by console output.
For failures caused by other reasons, terminate all releated
processes to avoid CI waits 2 hours and reports timeout.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have a fixed-partition on a flash device that is for example on
a spi controller we will not get a binding match currently. This is
because we expect a match between both the compatible and the fact that
fixed-partition node is a decendant of the spi bus.
To address this we treat fixed-partitions as if they are on no bus.
This has the effect of causing a binding match as well as ensuring that
when we process the fixed-partition node we will do anything special to
it because of the bus it happens to be under (for example SPI CS_GPIO
processing).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Setup node.compats right after we create the Node. This allows access
to the compats information in _bus_node.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Drivers cast the device config_info pointer to a driver-specific
structure. The referenced object is const-qualified; make sure the
cast doesn't inadvertently remove that qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Catch ImportError whenever a non-standard module import fails from any
runners that do one. Complain at runtime about it if the user actually
needs the runner.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This change enables specific compiler and linker options to be used in
the case that an arch/posix/os.arch.cmake file exists.
Note: os and arch in the above case are evaluations of
CMAKE_HOST_SYSTEM_NAME and CMAKE_HOST_SYSTEM_PROCESSOR.
Otherwise, the existing "generic" compiler and linker flags in
arch/posix/CMakeLists.txt are used.
Additional flags and checks are provided in
arch/posix/Linux.aarch64.cmake.
Added scripts/user_wordsize.py to detect if userspace is 64-bit or
32-bit, which should be consistent with the value of CONFIG_64BIT
for Aarch64 on Linux.
Fixes#24842
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
We don't need sanitycheck's use of EDT to report warnings, we'll get
them from the build system. So the warnings are just duplication and
noise, thus lets always suppress them.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Even though it is about to be done for sound technical reasons, a
subsequent patch adding access to all device nodes at the last minute
in the 2.3 release is going to be playing a bit of a fast one on
the Zephyr community, especially users of DT_INST APIs.
In particular, instance numbers are currently allocated only to
enabled nodes, but that will not be true soon: *every* node of a
compatible will be allocated an instance number, even disabled ones.
This is especially unfortunate for drivers and applications that
expect singletons of their compatibles, and use DT_INST(0, ...) to
mean "the one enabled instance of my compatible".
To avoid gratuitous breakage, let's prepare for that by sorting each
edt.compat2nodes sub-list so that enabled instances always come before
disabled ones.
This doesn't break any API guarantees, because there basically *are*
no ordering guarantees, in part precisely to give us the flexibility
to do things like this. And it does help patterns that use instances 0
through N-1, including the important singleton case.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
device_api attribute is not at offset 4 but 8 now as name and
config_info has been directly imported into struct device.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove semicolon between instance invocations of DT_FOREACH_IMPL_ and
thus DT_INST_FOREACH. This provides more flexibility to the user. This
requires we fixup in tree users to add semicolon where needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Abort if we find tests that are being skipped incorrectly. Tests should
be skipped using ztest_test_skip().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Originally this only dealt with constant timeouts. Add the ability to
recognize integer parameters and convert them as well.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
These look up tables generalize the compat2enabled map in a way we
will need to make the API more flexible in Zephyr.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Let's get the actual node status, instead of relying on enabled.
Leave enabled in place for gen_legacy_defines.py's sake.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
If a devicetree node doesn't have a matching binding we will at least
populate a common standard set of properties for that node. The list of
standard properties is:
compatible
status
reg
reg-names
label
interrupt
interrupts-extended
interrupt-names
interrupt-controller
This allows us to handle cases like memory nodes that don't have any
compatible property, we can still generate the reg values.
We limit this to known properties as for any other property we can not
fully determine the property type without a binding and thus we can't
ensure the generation for that property is correct or may not change.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit reverts the device tree binding vendor prefix check regular
expression change that was introduced by the following commit:
5b10fac97e
The changed regular expression fails to detect the correctly specified
vendor prefixes in the `vendor-prefixes.txt`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
While testing sanitycheck classes, found some wrongly initialisized
variables which caused issues, fixed those..
All Test* classes should now be ignored by pytest and should not be
treated as pytest code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Zephyr uses some defines to provide additional information about the
item being declared. When unrecognized these can confuse the
Coccinelle parser so that it does not apply semantic patches in
situations where they should be applied.
Add a macro file that extends the Coccinelle builtin macro file with
some identifiers that are specific to Zephyr.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When files were added, matching did not work and we were counting added
files twice. Use sets to make sure we have a unique list of files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Linux uses for_each in macros that produce loops; Zephyr uses
FOR_EACH. Update the corresponding checks to match Zephyr's spelling.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This takes the linux diffs between
a8c964eacb21288b2dbfa9d80cee5968a3b8fb21 and
16fbf79b0f83bc752cee8589279f1ebfe57b3b6e and applies them to the
Zephyr copy. Three changes did not apply cleanly:
* linux added a comment to the line that enables C99 comments;
Zephyr disallows them.
* linux uses vendor-prefixes.yaml; zephyr uses the older .txt file
* manual addition of colon in a check before BRACKET_SPACE error
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Some API that takes timeouts represented by integral milliseconds
recommended using the K_NO_WAIT and K_FOREVER constants, which are no
longer integers. This script replaces the incorrect arguments with
the corresponding legacy integral value.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
OSX compatibility added bossac runner.
Linux behvaiour is unchanged.
Window is now explicity mentioned as incompatible
Signed-off-by: Brendon Le Comte <brendon.lecomte@gmail.com>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This helper allows setting default Kconfig values based on devicetree
node properties without giving the full path to the node.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the compat2enabled and label2node maps in the global edt object to
speed up some functions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It's a common operation to want to find a node based on its label. Add
a lookup table to make this easier.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
In some cases terminate (SIGTERM) is not enough and we have to kill the
proces (SIGKILL), otherwise the process is stuck forever and taking
hours to complete and finally timeout in CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In some cases we were missing the reason and reporting 'Unknown',
check for failure and set the reason.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The default vertical tiling is designed for displays that are rotated 90
or 270 degrees from normal orientation. Devices where pixel data
advances first horizontally then vertically requires horizontally-tiled
data.
Similarly when generating upright text on a row-major-order monochrome
display the most significant bit may encode the pixel at the lowest
horizontal position.
Add options to control horizontal vs vertical tiling, and msb vs lsb
pixel order.
The commit also generates the representation of the glyph in comments at
each row.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Rename internal macros to use Z_ prefix instead of _K..
Those macros were missed when we did the global renaming activities.
Fixes#24645
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In case of flashing (which is typically used with OpenOCD)
we do reset of the target after programming application binary
in the non-volatile memory.
In case of Elf execution we need to reset the target before
loading Elf sections so that we might be sure our target
is in sane & expected state before we start execution.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Add option --report-suffix to append custom string to all generated
files. This is going to be useful for generating results for a specific
version, i.e. --report-suffix zephyr-v2.2.0-1814-ge737761d23
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes: #24576
The name of the symbolic link would be constructed using the full path
name to the target folder.
This is not needed and caused the issue raised in #24576.
This has been fixed by no longer using the toplevel target directory
in the link name, for example:
Old style: _project_zephyr_workspace_zephyr_include_sys
New style: include_sys
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a __WARN("Macro is deprecated") to all DT_<COMPAT>_BUS_<BUS> macros
now that all in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a __WARN("Macro is deprecated") to all DT_INST macros now that all
in tree users should have been converted to the new macros.
This is intended to make sure any PRs don't introduce new usages of
these macros.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The variables with the STATIC type aren't read.
The commit 877fc59e30 introduce the read of CMAKE_PROJECT_NAME
which could be defined in CMakeCache.txt file like that:
CMAKE_PROJECT_NAME:STATIC=MyProject
If STATIC type is not managed, the CMAKE_PROJECT_NAME isn't set and
CMake is always force to run again
Signed-off-by: Julien D'Ascenzio <julien.dascenzio@paratronic.fr>
This option prefers serial device names which are stable
across device plug/un-plug on platforms that support it (currently
just Linux, via /dev/serial/by-id).
This feature is opt-in as not all manufacturers include the
appropriate metadata for udev to generate unique names for their
devices.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Create support for muxed UARTs which are attached to a real
UART and which use GSM 07.10 muxing protocol to create virtual
channels that can be run on top of the real UART.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix two issues:
1. The script assumes the default CMake generator build tool
platform is installed. On Linux at least, that's Make instead
of Ninja, but Make might not be installed since Zephyr recommends
Ninja. On Windows, that might be VS Code or nmake.
Calling `cmake -P pristine` instead of `cmake --build <path>
--target pristine` has the benefit of removing the dependency on a
build command, and hence the default generator is not relevant.
2. It also assumes run_cmake() returns control, and therefore pristine
can be run.
However, if the cmake command fails hard (say, due to issue #1
before this patch), run_cmake() throws an exception instead.
Fix that by trying to run the pristine target in a finally block
instead, and adding some manual cleanup steps in case the build
system is in a bad state and pristine fails too.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Pass EXTRA_DTC_FLAGS to kconfig so the EDT object we have in
kconfigfunctions can use that to set warn_reg_unit_address_mismatch
properly.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that the main Zephyr build system (and the documentation's) no
longer require ZEPHYR_BASE in the environment, the sanitycheck
script's continuing to require this makes less sense.
We can easily find ZEPHYR_BASE starting from a given sanitycheck
script, so let's just do that. Preserve the ability for a user to
override the ZEPHYR_BASE location in the environment as usual for
compatibility.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The patch specification should not be conditional on failing to match
an identifier, as some replaced values are identifiers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Always generate the comment text specifying a node's path identifier.
Add the DT_ prefix so it matches the actual macro usable from C. This
will make a following patch which adds support for accessing a node's
parent result in a generated header file which is easier to read.
Put the node's path right after "Devicetree node:" in the comment.
This makes the section for that node easier to grep for.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The root node's z_path_id value for the duration of this script
doesn't match the value DT_ROOT is defined to in devicetree.h.
I didn't notice this because the root node's compatible doesn't have a
matching binding in practice, so no macros are generated for it, but
we're about to start looking at node parents explicitly and this is an
issue for that. Fix it so the root node's z_path_id is "N", since
DT_ROOT is the token "DT_N".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_REG_IDX_<idx>_EXISTS 1
DT_N_<node-id>_IRQ_IDX_<idx>_EXISTS 1
This will allow us to use IS_ENABLED() in DT_REG_HAS_IDX and
DT_IRQ_HAS_IDX which matches behavior of other DT_*_HAS_* macros as
well as lets use these with COND_CODE_1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When retrying failed tests, make sure we keep old results and only
update those tests that were retried.
Also, remove duplication of code for creating the reports and make the
report function a bit more generic.
sanitycheck.xml is now listing or tests, not only the test application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This can be used from Kconfig to detect if any enabled nodes of a
compatible are on a bus. This can be useful if a compatible might
appear on multiple buses, to enable them by default from application
code without having to change prj.conf settings depending on what's in
the devicetree.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_P_<prop-id>_NAME_<NAME>_EXISTS
DT_N_<node-id>_P_<prop-id>_IDX_<idx>_EXISTS
This will be useful to check availability of named or indexed
property like dmas/dma-names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The last user of the .conf file format DTS data has been removed. We
can now remove the generation and associated support for the .conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If there is an error in the CMake configuration phase (this can happen
if a script run using execute_process() fails, for instance), the
build system is incompletely generated and future attempts to run
'west build' will fail. This manifests in the following error:
Error: could not find CMAKE_PROJECT_NAME in Cache
Whenever we see that the cache exists but this variable is missing,
let's just force CMake to run again. This avoids the error in my
testing and is a bit more user friendly. I've seen multiple users
asking what to do in this situation; the answer is always "just build
it again", so we might as well do it for them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
breathe v4.15.0 was just released and fixes some compatibility issues
with latest sphinx, the combo works, however with many warnings that we
still need to either fix or whitelist. This is temporary until we are
able to use those new versions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
dt_int_val, dt_hex_val, and dt_str_val have been deprecated for two
releases and thus are meant to be removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add kconfigfunctions that given the property name to an integer type
property will return its value as either an string int or string hex
value.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Version 3.0.0 release recently break doc build, lock version of sphinx
to something compatible while we upgrade dependencies...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This function takes a 'label' and returns "y" if an "enabled" node with
such label can be found in the EDT and that node is compatible with the
provided 'compat', otherwise it returns "n".
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Replace timeout parameters that are multiples of MSEC_PER_SEC, or such
a value passed through K_MSEC, with the normalized timeout expression
using whole seconds.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recent timeout rework reverted the interpretation of the delay
parameter to K_THREAD_DEFINE from a timeout to a count in
milliseconds, although the corresponding parameter in the
k_thread_create() function remains a timeout. Convert timeout
expressions to millisecond durations where necessary.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
if we are changing a test or a sample, there is not need to run
everything, it is enough to just build/run the changed test/sample.
Also, some files have impact on the code and if they are being changed,
do not run fully sanitycheck.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
