The flash layout definition has changed in upstream TF-M for the
LCPXPRESSO55S69 platform, for builds without bootloader. Fix the
layout in the boards' configuration, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Updates board documentation for several NXP boards to reflect currently
supported features, NXP documentation links, clarifications on debug
probes, additional troubleshooting tips, and some minor editorial
changes.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Reduce the length of the Kconfig defines related to
null-pointed dereference detection in Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
USB devicetree nodes in Zephyr have different names,
mostly derived from the designations in data sheets.
We also have an USB audio sample which has a kind of
experimental approach to configure audio devices, that
are not real hardware, via devicetree.
Sample itself is generic and can be run on any board with
USB device controller and isochronous endpoints support.
Add usbd0 alias to specific USB node to allow generic
USB audio sample to be build on nRF and i.MX RT boards.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This board uses an old bootloader version. The bootloader
always relocate code due to flash bootloader. This imply
a wrong behaviour when using --offset. This is fixed using
bossac legacy mode.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
There is no known TFM/secure side solution for the lpcxpresso55s28.
The '_ns' board config variant was added as a copy/pasted based on
how some other boards did things. If/when TFM supports the board
we can revert this to support it.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch enables the DMA chan_blen_transfer and loop_transfer tests on
the nucleo_f070rb board.
Signed-off-by: Simon Guinot <simon.guinot@seagate.com>
These compatibles don't match the dt-schema regular expression for
compatible properties that we'd like to support in Zephyr because they
do not begin with a letter.
Use linaro, as a vendor prefix to make them compliant. Update the
release notes since out of tree users will need to keep up.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit forces the `CONFIG_BUILD_WITH_TFM=y` option when
using the `_ns` build targets for the LPC55sXX.
Using these targets in samples or in CI without an accompanying
secure environment image (ex. TF-M) leads to execution failures,
since the NS images are offset a predetermined amount.
Fixes#35100
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Do not assert initialization priority when building
with CONFIG_TRUSTED_EXECUTION_SECURE=y.
Regulators are not enabled so should not assert
initialization chain priorities.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Adds arduino_spi to the list of supported features for all NXP boards
that define an arduino_spi node in their device tree. This enables
twister to select these boards for tests or samples the depend on this
feature.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Rename the NXP LPCXpresso55S16 board definition from
lpcxpresso55s16_ns (non-secure) to lpcxpresso55s16 and remove TF-M
configuration options.
While the LPC55S16 does have Arm TrustZone support, there is no TF-M
support available upstream yet.
Fixes#35100
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Modify support for u-blox BMD-345-EVAL which uses the nRF52840
and a Skyworks RFX2411 FEM.
These edits follow the naming cnoventions that is used
with the other u-blox EVKs recently added, or in progress
This board is similar to the nRF52840dk_nrf52840 with the
addition of a FEM. Four Arduino GPIO pins have been
reassigned to the PA_LNA control pins.
u-blox would prefer to use this naming convention to match
other BMD-3xx-EVAL and EVK-NINA-Bx boards recently submitted.
Tested with blinky, button, and Bluetooth peripheral_hr
Checking dts files
Updated CODEOWNERS to rename bmd_345_eval to ubx_bmd345eval_nrf52840
Added CMakeLists.txt, updated board.c
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Adds arduino_serial to the list of supported features for all NXP boards
that define an arduino_serial node in their device tree. This enables
twister to select these boards for tests or samples the depend on this
feature.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit adds the missing `ARM_TRUSTZONE_M` config flag
from TrustZone-enabled cores on LPC55sxx board targets.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
NPCX series ROM code changes the chip basic setting by firmware binary
header for loading the firmware from flash to RAM. Add the following to
improve the ec firmware header setting:
- Move the ECST which generates the firmware binary header to NPCX
common folder. All the following NPCX series chips can use this.
- Add ecst setting option in Kconfig.
Signed-off-by: Yuval Peress <peress@chromium.org>
Signed-off-by: Wealian Liao <WHLIAO@nuvoton.com>
Mass conversion of STM32 boards to dts based clock configuration has
left some minor whitespace issues. Fix these and some other whitespaces
in the affected files.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Enable FlexSPI NOR flash driver with XIP build options.
Configure FlexSPI pins, update board documentation.
Add FlexSPI NOR flash dts node for mimxrt685_evk.
Enable flash storage by adding partition to dts file.
Using last 1MB for storage, and reserving 63MB for code.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
Add SCIF bus initial support to Renesas R-Car SOC series.
SCIF1 is used as main serial and shell output on R-Car H3 board.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
Recently WiFi ESP32 driver (utilizing WiFi radio in ESP32 SoC) was
introduced into drivers/wifi/esp32/ and it already caused confusion as
there was existing drivers/wifi/esp/ directory for ESP-AT
driver (utilizing external WiFi chip, by communicating using AT commands
from any serial capable platform). So question has arisen whether it is
good to merge both, while they are totally different drivers.
Rename ESP-AT driver to be placed in drivers/wifi/esp_at/, so that it is
easier to figure out difference between "esp32" and "esp_at" just by
looking at driver name. Rename also DT compatible and all Kconfig
options for the same reason.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Adding the Circuit Dojo nRF9160 Thing Plus device tree definitions.
Both secure and non secure targets.
Adding LIS2DH to nRF9160 Feather
definitions. Updating flash to W25Q32JV.
Signed-off-by: Jared Wolff <hello@jaredwolff.com>
Added arduino gpios, and the typically used aliases for
arduino_spi, arduino serial and arduino_i2c
Signed-off-by: Kim Bøndergaard <kim.boendergaard@escoglobal.com>
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
This board clock configuration was relying on default Kconfig
value for APB2 value, and hence apb2 has not been converted
to device tree.
Explicit apb2 value in dts.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Fix definition condition for APB1 and APB2.
These were not visible until now as defaulted
in Kconfig.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
These were missing but not visible since value was defaulted
in Kconfig.
With Kconfig deprecation this breaks compilation.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
We don't currently configure any SPI interface on the hexiwear_k64 so
remove 'spi' as a listed supported feature in the board YAML.
This can be added back if SPI support is added for the board in the
future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Create a common dtsi file to share peripherals between both CPU cores.
The spi is the initial shared peripheral.
Signed-off-by: Gerson Fernando Budke <gerson.budke@atl-electronics.com>
Adds flash partitions and chosen nodes to the mimxrt1060_evk device tree
to support mcuboot and storage on the external QSPI flash. This flash is
rated for 100K minimum program-erase cycles per sector, therefore this
partition configuration supports approximately 100K / (3072/128) = 4167
upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds flash partitions and chosen nodes to the mimxrt1064_evk device tree
to support mcuboot on the internal QSPI flash. This flash is rated for
100K minimum program-erase cycles per sector, therefore this partition
configuration supports approximately 100K / (1984/64) = 3225 upgrades.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
