Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Modified the samples such that the client will attempt to
setup 2 sink streams and 1 source stream, basically
representing a headset use case.
This also excercises both setting up a unidirectional
and a bidirectional ISO channel using the 3 audio streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The sample used `net_buf_ref` to send the same data multiple
times on multiple streams, but the send procedure, which
ends up calling bt_conn_send_cb, does not work
with multiple refs. We thus replace the refs with net_buf_clones.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The timeout was accidentally changed from 60 seconds
to 0.6 seconds.
This commit also fixes the number of prints, since we are now
sending at 10ms intervals.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Samples peripheral_gatt_write and central_gatt_write to
demonstration use of GATT Write Command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The controller does not support connected ISO yet, so it does not make
sense to build it form devices that build both host and controller.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Remove v1 implementation from log_core and all references in the tree.
Remove modules used by v1: log_list and log_msg.
Remove Kconfig v1 specific options.
Remove Kconfig flags used for distinction between v1 and v2.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This test only runs on one platform, so make sure we do not exclude the
only platform using some other hardware related filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename the BT_ISO_INTERVAL_MIN/MAX to
BT_ISO_SDU_INTERVAL_MIN/MAX to avoid confusing this
the the ISO interval which is different from the SDU
interval.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new parameters to bt_iso_chan_send:
sn: The packet sequence number which shall be incremeted
per SDU interval.
ts: An optional timestamp value used to synchronize SDUs.
The sequence number in the API uses a 32-bit value even though
the sequence number for the HCI command is 16-bit. This is to
properly handle wrapping of sequence numbers, which is much
easier to do with additional bits allocated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Provided sample support for Telink tlsr9518adk80d board.
Set CONFIG_BT_TINYCRYPT_ECC=n (supported by BLE controller).
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
The ISO security implementation works by verifying
against the acl (bt_conn) sec_level field. The
bt_conn sec_level field is only available
if CONFIG_BT_SMP is enabled, so this commit
adds guards for all ISO security checks as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The check did not properly check the info->flags as a bitfield,
and thus never decoded the data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increases the scan and adv data sizes to better support
the extended advertising data and periodic advertising
data (BASE).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up some of the board specific configuration files.
Removed all CONFIG_BT_CTLR* configs from the nRF5340
appcore conf files as that does not compile the controller.
Ensured that the ISO buffer in the controller for
nRF52840 can contain SDUs from all BAP LC3 minimum
requirements, as the controller does not yet
support segmentation of SDUs.
Also fixed a few bad configurations (broadcast sink not
enabling the sync support etc.).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the explicit enable of Extended and Periodic
Advertising support in Controller, the feature is no
longer experimental in the Controller and is now enabled
by default when application uses them by enabling as
Host feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a call to bt_iso_chan_get_info for each CIS in the sample
to ensure that we don't attempt to send any data on a CIS
that is RX only.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add two new Kconfigs: BT_ISO_CENTRAL and BT_ISO_PERIPHERAL
that is used to do central or peripheral only builds,
similar to the BT_CENTRAL or BT_PERIPHERAL Kconfigs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The audio stream receive callback now contains a
recv_info struct, which contain crucial information
such as timestamps and packet validity.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The values represent an enum, and it makes sense for the
enum values to follow the enum type name, so an
_DIR_ infix was added to the values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Many functions and struct fields had the directory/type
value, but named in different ways and stored in different ways.
This change updates all uses of it to use the same name
and type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The enum bt_audio_pac_type does not fully
represent the what the value is used for.
The typical use of it is not for just published
audio capabilities (PAC), but rather describes the
type, or direction, of audio endpoints.
For the unicast client, the type/direction is
relative to the unicast server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In bt_audio_unicast_group_create, bt_audio_unicast_group_add_streams
and bt_audio_unicast_group_remove_streams to use an array
of pointers, instead of an array of streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added chosen syntax in Device Tree to abstract the IPC device that is
used with the IPC service module in the Bluetooth HCI RPMsg driver.
Ported affected boards to declare this alias.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Update the sample to print the ISO information like flags,
sequence number and timestamp received in the ISO receive
callback.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix Broadcast ISO and Synchronized Receiver project
configurations related to IPC use.
Relates to commit cf6a58d3f6 ("bluetooth: hci: rpmsg:
use ipc service library").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to be consistent with what is possible in Devicetree, always
take a period in nanoseconds. Other scales or units may be specified by
using, e.g., the PWM_MSEC() macros (all of them converting down to
nanoseconds). This change then deletes the "_nsec" and "_usec" versions
of the pwm_set call.
Note that this change limits the period to UINT32_MAX nanoseconds,
~4.3s. PWM is, in generali, used with periods below the second so it
should not be a problem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- add an overlay file for the bbc_microbit board with specification
of GPIO that should be used as the PWM output to buzzer
- update a PWM related macro in the microbit specific code to refer
to PWM channel instead of pin
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
This change augments the application object name change notification to
occur prior to the actual name change done by the OTS layer.
Notifying prior to the actual name change makes it possible to inform the
application of the current name of the object as well as the new name.
Signed-off-by: Abe Kohandel <abe.kohandel@gmail.com>
Replace hardcoded LC3 codec config with the selected configuration
used in the GATT profiles.
The selected codec configuration on the client will be used on both
sides for LC3 encode/decode.
This required completing the LC3 macroes for building codec
cababilities and codec configuration as they were not setting the
max_frames_per_sdu and frames_per_sdu values.
So as a side effect this change adds the capability to pack multiple
audio frames into a single SDU - tested with 2 frames every 20ms.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Change the receive flags in the struct bt_iso_recv_info
to a bitfield instead of a single value. This will allow
us to extend the flags with more options.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase to 250 simultaneous connections in the BabbleSim
test. Update connection interval to accommodate 250
non-overlapping connections and a scan window. And make the
use of is_disconnecting flag consistent between central and
peripheral sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add sample for the Basic Audio Profile (BAP) broadcast
audio sink role, that can scan for a receive audio
data over ISO from BAP broadcast sources.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sample using the Basic Audio Profile (BAP)
broadcast source role, that advertises mock audio
data over ISO.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some names of the test cases are duplicated within the project.
This commit contains the proposed names of the test scenarios.
Signed-off-by: Katarzyna Giadla <katarzyna.giadla@nordicsemi.no>
