The emulated RTC device driver is used to emulate a real
RTC device. Note that it is not a replacement for the
native_rtc module, which is used to control simulated time,
get time from the host system, etc.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This test suite adds tests for the following:
- Setting and getting time
- Validating time is incrementing correctly
- Validating behavior of alarms with callback disabled
- Validating behavior of alarms with callback enabled
- Validating update callback
The test suite uses the devicetree alias rtc to find
the device to test.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
This commit adds the rtc.h header file which contains
API functions for real-time-clocks, which are low power
devices which track and represent broken-down time.
It also changes one line of doxygen documentation in the
maxim_ds3132.h file to place it in its own group.
The handlers for use of the API from userspace is also
added with this commit.
The API is split into one mandatory section, setting and
getting time, and three optional sections, alarms, update
event callback, and clock calibration.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
FixPoint1616_t is typedef'd to uint32_t. The result of dividing two
variables of that type is also unsigned. Passing an unsigned value to abs
doesn't make sense.
Cast the value to int32_t in case the computaton of diff1_mcps generates a
negative result so that xTalkCorrection doesn't end up with a huge value.
Signed-off-by: Keith Packard <keithp@keithp.com>
This fixes a typo in the testing framework docs where the
ZTEST_EXPECT_SKIP MACRO seems to be referring to the wrong function.
Signed-off-by: Ivan Herrera Olivares <ivan.herreraolivares@gmail.com>
The PAST sender needs to support periodic advertising
and the PAST receiver needs to support periodic advertising
sync.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The check is very unlikely to be needed, but fixing
warning about assigning ARRAY_SIZE to an uint8_t value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
- Fixes missing poll out events when UART interrupt is enabled
- Fixes blocking USB interface during board start up.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Test was assuming that domain name is empty but on some
SoC CONFIG_LOG_DOMAIN_NAME is set by default and test
was failing. Add setting of domain name to test
configuration to ensure that same name is used for all
platforms.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Move CONFIG_PECI_INTERRUPT_DRIVEN inside the CONFIG_PECI if statement to
avoid showing it in menuconfig when PECI drivers are disabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The log_backed section is now using the iterable section macros so
we should be using zephyr_iterable_section() in common-rom.cmake
so the generation of the linker script is correct for arm clang
compiles.
Fixes#56440
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add missing users of ITERABLE_SECTION_ROM* macros that should exist
in common-rom.cmake so that linker script generation for arm clang
works for those users.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Add missing users of ITERABLE_SECTION_RAM* macros that should exist
in common-ram.cmake so that linker script generation for arm clang
works for those users.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
We get compile warnings of the form:
error: converting the result of
'<<' to a boolean; did you mean
'((__aeabi_ctype_table_ + 1)[(byte)] << 28) != 0'?
[-Werror,-Wint-in-bool-context]
if (!isprint(byte)) {
^
Since isprint (and the other is* functions) return an int, change check
to an explicit test against the return value.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
This effectively reverts the following three commits:
- 0f9f18843f
- 6812441099
- 326f7bd450
and also the changes that got copied to the nrf5340_audio_dk_nrf5340
board.
The workaround brings more harm than good. It already required many
tweaks in various tests to make them pass (because it introduced
a significant overhead in processing of the console UART interrupt)
and now it makes the I2S driver tests to fail. It's not reasonable
to add more tweaks in Zephyr tests just to keep this workaround in
the tree. Instead the root cause should be fixed (if the original
problem still occurs).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Adds tests for the custom timestamp functionality. It also
includes a basic test for the default behaviour.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
This feature adds support for using a custom function to format
the timestamp used for all logging backends. When the kconfig
option LOG_OUTPUT_FORMAT_CUSTOM_TIMESTAMP is set the custom
formatting function will always be used.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Many/most LE Audio services are dynamically registered,
but have been enabled without BT_GATT_DYNAMIC_DB.
Add select BT_GATT_DYNAMIC_DB for the services. Select
was used instead of depends on to make it simpler
to enable them.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds new hidden compilation flags that indicate whether the
implementation is configured to be able to receive/transmit audio data.
The flags are profile agnostic to loosen dependencies between
modules/services.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Clarify the debugging section by adding subsections for the GDB client
and server. Add information about reading the system console while
debugging. Make formatting a bit more consistent generally.
Signed-off-by: Abe Levkoy <alevkoy@google.com>
For run_qemu and qemu_debugserver, the targets that use QEMU_PIPE,
ensure that the QEMU_PIPE file exists before passing the path to QEMU as
an argument.
Signed-off-by: Abe Levkoy <alevkoy@google.com>
This commit marks testcases that require working Power Managament with
the appropriate `pm` tag to allow proper testcase filtering in the board
YAML file.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Increase timeout for tests/lib/mpsc_pbuf/libraries.mpsc_pbuf_concurrent
as it fails sometimes on the 60 sec. default timeout.
Fixes#56349
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Adds details on the update fs_mgmt features for faster
uploads/downloads and new Kconfig entries added.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds information on updated fs_mgmt functionality and describes
the new optional file close command.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This vastly increases the performance of file transfers using the
fs_mgmt group over MCUmgr by allowing the file handle to remain open
between commands instead of having to open, feek, read/write then
close the file handle for each invocation.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds "fragment" to the Kconfig text, this is because these files
are known as Kconfig fragments, and when searching the
documentation for this, all you get are irrelevant results instead
of this page - which is by far the most important one.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add optional filter value properties. The filter is disabled by default
but can be enabled by setting the filter-sample-period > 0 in the dts
file. A latency is introduced if the filter is enabled. The latency can
be printed by setting sensor log level to debug.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Fix inconsistency between compile-time and runtime check on
counts_per_revolution. Add macro to simplify compile-time prop value
checks.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
There was a bug in the BLE backend when it was the only enabled
backend. Instead of using the API `log_backend_activate` to
activate the backend, the logger requires the first time to be
enabled with `log_backend_enable`.
Signed-off-by: Victor Chavez <chavez-bermudez@fh-aachen.de>
This commit removes the possible race condition when notifying
the bonding request.
When the race condition appears there is possibility that
one of the cores would never send notification for bonding.
This change makes it sure that the notification would be sent
at least once.
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
