As we are allowed to pass any integer value as as software
fatal exception reason, we need to fix the inline assembly
for ARMv6-M, to accept large immediate offsets. We do this
by changing the way we write the exception reason to R0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The struct definitions for pdpt, pd, and pt entries has been
removed:
- Bitfield ordering in a struct is implementation dependent,
it can be right-to-left or left-to-right
- The two different structures for page directory entries were
not being used consistently, or when the type of the PDE
was unknown
- Anonymous structs/unions are GCC extensions
Instead these are now u64_t, with bitwise operations used to
get/set fields.
A new set of inline functions for fetcing various page table
structures has been implemented, replacing the older macros.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This hasn't been necessary since we dropped support for 32-bit
non-PAE page tables. Replace it with u64_t and scrub any
unnecessary casts left behind.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This will be used for both 32-bit and 64-bit mode.
This header gets pulled in by x86's arch/cpu.h, so put
it in include/arch/x86/.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
include/sys/arch_inlines.h will contain all architecture APIs
that are used by public inline functions and macros,
with implementations deriving from include/arch/cpu.h.
kernel/include/arch_interface.h will contain everything
else, with implementations deriving from
arch/*/include/kernel_arch_func.h.
Instances of duplicate documentation for these APIs have been
removed; implementation details have been left in place.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Set the NXE bit in the EFER MSR so that the NX bit can
be set in page tables. Otherwise, the NX bit is treated
as reserved and leads to a fault if set.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The POSIX ARCH delegates some of the tasks which normally
are taken care of by the ARCH to the SOC or BOARD levels.
To avoid changes in the kernel-arch IF propagating into
the arch-soc and arch-board interfaces (which would break
off-tree posix boards) isolate them.
Also move arch inlined functions into the arch.h header,
and out from the headers which specify the posix arch-soc
and arch-board interfaces.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
arch/cpu.h and kernel_arch_func.h are expected to define different
functions, per the architecture interface.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is really just to facilitate CPU bootstrap code between
the BSP and the APs, moving the clear operation out of the way.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The linker script was missing symbols that defined the boundaries
of kernel memory segments (_image_rom_end, etc.). These are added
so that core/memmap.c can properly account for those segments.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Set STACK_ALIGN and STACK_ALIGN_SIZE to 8 bytes instead of 4 bytes in
case a 64-bit posix board is used.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This patch is a preparatory step in enabling the MMU in
long mode; no steps are taken to implement long mode support.
We introduce struct x86_page_tables, which represents the
top-level data structure for page tables:
- For 32-bit, this will contain a four-entry page directory
pointer table (PDPT)
- For 64-bit, this will (eventually) contain a page map level 4
table (PML4)
In either case, this pointer value is what gets programmed into
CR3 to activate a set of page tables. There are extra bits in
CR3 to set for long mode, we'll get around to that later.
This abstraction will allow us to use the same APIs that work
with page tables in either mode, rather than hard-coding that
the top level data structure is a PDPT.
z_x86_mmu_validate() has been re-written to make it easier to
add another level of paging for long mode, to support 2MB
PDPT entries, and correctly validate regions which span PDPTE
entries.
Some MMU-related APIs moved out of 32-bit x86's arch.h into
mmustructs.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This patch re-namespaces global variables and functions
that are used only within the arch/arm/ code to be
prefixed with z_arm_.
Some instances of CamelCase have been corrected.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix the following warning from gcc-9.2:
x86/ia32/syscall.h: In function 'test_kinit_preempt_thread':
x86/ia32/syscall.h:43:2: error: listing the stack pointer register
'esp' in a clobber list is deprecated [-Werror=deprecated]
43 | __asm__ volatile("push %%ebp\n\t"
| ^~~~~~~
x86/ia32/syscall.h:43:2: note: the value of the stack pointer after
an 'asm' statement must be the same as it was before the statement
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
k_cpu_idle() and k_cpu_atomic_idle() were being directly
implemented by arch code.
Rename these implementations to z_arch_cpu_idle() and
z_arch_cpu_atomic_idle(), and call them from new inline
function definitions in kernel.h.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
ACPI is predominantly x86, and only currently implemented on x86,
but it is employed on other architectures, so rename accordingly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple naming change, since MULTIBOOT is clear enough by itself and
"namespacing" it to X86 is unnecessary and/or inappropriate.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
x86 has more complex memory maps than most Zephyr targets. A mechanism
is introduced here to manage such a map, and some methods are provided
to populate it (e.g., Multiboot).
The x86_info tool is extended to display memory map data.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This sample demonstrates basic use of the x86 multiboot and ACPI
systems, and also provides some useful information about the board
it's booted on: data handed over by the multiboot loader (which is
either QEMU or GRUB at this point), basic APIC CPU topology, and
timer driver frequency (computed empirically).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Originally, the multiboot info struct was copied in the early assembly
language code. This code is moved to a C function in multiboot.c for
two reasons:
1. It's about to get more complicated, as we want the ability to use
a multiboot-provided memory map if available, and
2. this will faciliate its sharing between 32- and 64-bit subarches.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Implement a simple ACPI parser with enough functionality to
enumerate CPU cores and determine their local APIC IDs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Refactor z_arch_is_user_context() for ARM, so it uses
the CMSIS CONTROL_nPRIV_Msk instead of hard-coded 0x1.
Fixing also some typos in include/arch/arm/syscall.h.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Declare the 64-bit TSS as a struct, and define the instance in C.
Add a data segment selector that overlaps the TSS and keep that
loaded in GS so we can access the TSS via a segment-override prefix.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is largely a conceptual change rather than an actual change.
Instead of using an array of interrupt stacks (one for each IRQ
nesting level), we use one interrupt stack and subdivide it. The
effect is the same, but this is more in line with the Zephyr model
of one ISR stack per CPU (as reflected in init.c).
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The boot time measurement sample was giving bogus values on x86: an
assumption was made that the system timer is in sync with the CPU TSC,
which is not the case on most x86 boards.
Boot time measurements are no longer permitted unless the timer source
is the local APIC. To avoid issues of TSC scaling, the startup datum
has been forced to 0, which is in line with the ARM implementation
(which is the only other platform which supports this feature).
Cleanups along the way:
As the datum is now assumed zero, some variables are removed and
calculations simplified. The global variables involved in boot time
measurements are moved to the kernel.h header rather than being
redeclared in every place they are referenced. Since none of the
measurements actually use 64-bit precision, the samples are reduced
to 32-bit quantities.
In addition, this feature has been enabled in long mode.
Fixes: #19144
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
when enable CONFIG_CUSTOM_SECTION_ALIGN, it need less alignment
memory for image rom region. But that needs carefully configure
MPU region and sub-regions(ARMv7-M) to cover this feature.
Fixes: #17337.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Include .gcc_except_table (sub-)sections in linker files to support C++
with exceptions enabled. If these sections are not mapped warnings will
be generated for orphaned sections at link time.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
x86_64 doesn't use devicetree, so put some hand-coded definitions
into arch.h to allow it to use the DT-enabled HPET driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Not sure why these were formatted the way they were, but I've removed
unnecessary line breaks, embedded control characters (actual embedded
tabs, not escape sequences) and escape sequences.
No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inline-assembly functions are identical between IA32 and
Intel64 arches, so move them to the common arch.h file.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This function, like its cousin z_tsc_read(), can be shared between
subarches. Note: it's unclear to me if we actually need these to be
two separate functions (do we need serialization?) or if they can
be combined into one function. Add that to the to-do list.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The previous linker script was barebones and non-standard. It is
replaced with a script conforms to the rest of the Zephyr arches,
utilizing include/linker headers and standard macros.
link-tool-gcc.h is updated to account for the "i386:x86-64" arch and
the generation of 64-bit ELF binaries.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Fleshed out z_arch_esf_t and added code to build this frame when
exceptions occur. Created a separate small stack for exceptions and
shifted the initialization code to use this instead of the IRQ stack.
Moved IRQ stack(s) to irq.c.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
First "complete" version of Intel64 support for x86. Compilation of
apps for supported boards (read: up_squared) with CONFIG_X86_LONGMODE=y
is now working. Booting, device drivers, interrupts, scheduling, etc.
appear to be functioning properly. Beware that this is ALHPA quality,
not ready for production use, but the port has advanced far enough that
it's time to start working through the test suite and samples, fleshing
out any missing features, and squashing bugs.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simplified these two inline functions somewhat, and refactored them:
unlocking can be shared between subarches, but locking cannot.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The sys_inXX() and sys_read/writeXX() I/O primitives can be shared
between subarches of x86 with minor modifications, so move them.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This patch adds basic build infrastructure, definitions, a linker
script, etc. to use the Zephyr and 0.10.1 SDK to build a 64-bit
ELF binary suitable for use with GRUB to minimally bootstrap an
Apollo Lake (e.g., UpSquared) board. The resulting binary can hardly
be called a Zephyr kernel as it is lacking most of the glue logic,
but it is a starting point to flesh those out in the x86 tree.
The "kernel" builds with a few harmless warnings, both with GCC from
the Zephyr SDK and with ICC (which is currently being worked on in
a separate branch). These warnings are either related to pointer size
differences (since this is an LP64 build) and/or dummy functions
that will be replaced with working versions shortly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Some of the elements of arch.h can be shared between subarches,
so put them in a common file and factor out the rest. Placeholder
left for the Intel64 definitions to be added later.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Kinetis SoCs have a 16-byte flash configuration field that must be
loaded at a specific address in flash. This field is not needed if we
are building an image to be chainloaded by MCUboot or a RAM-only image,
so we can exlude it in these cases and recover some wasted flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
We re-wrote the xtensa arch code, but never got around
to purging the old implementation.
Removed those boards which hadn't been moved to the new
arch code. These were all xt-sim simulator targets and not
real hardware.
Fixes: #18138
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This appears to be leftover from the days when we generated
more memory protection data at build time.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Utilize the multi-level irq infrastructure and replace custom handling
for PLIC on riscv-privilege SoCs. The old code offset IRQs in drivers
and various places with RISCV_MAX_GENERIC_IRQ. Instead utilize Zephyr's
encoded IRQ and replace offsets in drivers with the IRQ define from DTS.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The CC3235SF requires a debug header to be placed at the beginning of
internal flash, so that the bootloader does not automatically overwrite
the flash memory with the program saved in external flash.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This follows the z_arch_irq_en-/dis-able() so that the SoC
definitions are responsible for functions related to multi-level
interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_NUM_IRQS blindly assumes CONFIG_2ND_LEVEL_INTERRUPTS
and CONFIG_3RD_LEVEL_INTERRUPTS are always enabled together,
which is not always the case. So fix the #define.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Update the xtensa backend to work better with the new fatal error
architecture. Move the stack frame dump (xtensa uses a variable-size
frame becuase we don't spill unused register windows, so it doesn't
strictly have an ESF struct) into z_xtensa_fatal_error(). Unify the
older exception logging with the newer one (they'd been sort of glomed
together in the recent rework), mostly using the asm2 code but with
the exception cause stringification and the PS register field
extraction from the older one.
Note that one shortcoming is that the way the dispatch code works, we
don't have access to the spilled frame from within the spurious error
handler, so this can't log the interrupted CPU state. This isn't
fixable easily without adding overhead to every interrupt entry, so it
needs to stay the way it is for now. Longer term we could exract the
caller frame from the window state and figure it out with some
elaborate assembly, I guess.
Fixes#18140
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
In arch/arc/arch.h the extern "C" in the including context is left
active during an include to avoid more complex restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
In arch.h the extern "C" in the including context is left active during
include of target-specific mpu headers to avoid more complex
restructuring.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Consistently place C++ use of extern "C" after all include directives,
within the negative branch of _ASMLANGUAGE if used.
Remove extern "C" support from files that don't declare objects or
functions.
Background from issue #17997:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
SR and LR were used as global names for load and store RISC-V assembler
operations, colliding with other uses such as SR for STATUS REGISTER in
some peripherals. Renamed them to a longer more specific name to avoid
the collision.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Related to #17997, for the POSIX arch:
* Remove some unnecessary extern "C" and ifdef blocks
* Move an include out of one of these blocks
* Add a missing extern "C" block
Background:
Declarations that use C linkage should be placed within extern "C"
so the language linkage is correct when the header is included by
a C++ compiler.
Similarly #include directives should be outside the extern "C" to
ensure the language-specific default linkage is applied to any
declarations provided by the included header.
See: https://en.cppreference.com/w/cpp/language/language_linkage
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Cortex R has a write buffer that can cause reordering problems when
accessing memory mapped registers. Use memory barries to make sure that
these accesses are performed in the desired order.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Removes very complex boot-time generation of page tables
with a much simpler runtime generation of them at bootup.
For those x86 boards that enable the MMU in the defconfig,
set the number of page pool pages appropriately.
The MMU_RUNTIME_* flags have been removed. They were an
artifact of the old page table generation and did not
correspond to any hardware state.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* arc connect is a component to connect multiple arc cores
* it's necessary for arc smp support
* the following features are implemented
* inter-core interrupt unit
* gloabl free running counter
* inter-core debug unit
* interrupt distribute unit
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Makes the code that defines stacks, and code referencing
areas within the stack object, much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Previously, context switching on x86 with memory protection
enabled involved walking the page tables, de-configuring all
the partitions in the outgoing thread's memory domain, and
then configuring all the partitions in the incoming thread's
domain, on a global set of page tables.
We now have a much faster design. Each thread has reserved in
its stack object a number of pages to store page directories
and page tables pertaining to the system RAM area. Each
thread also has a toplevel PDPT which is configured to use
the per-thread tables for system RAM, and the global tables
for the rest of the address space.
The result of this is on context switch, at most we just have
to update the CR3 register to the incoming thread's PDPT.
The x86_mmu_api test was making too many assumptions and has
been adjusted to work with the new design.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently page tables have to be re-computed in
an expensive operation on context switch. Here we
reserve some room in the page tables such that
we can have per-thread page table data, which will
be much simpler to update on context switch at
the expense of memory.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are two aspects to this: CPU registers are twice as big, and the
load and store instructions must use the 'd' suffix instead of the 'w'
one. To abstract register differences, we simply use a ulong_t instead
of u32_t given that RISC-V is either ILP32 or LP64. And the relevant
lw/sw instructions are replaced by LR/SR (load/store register) that get
defined as either lw/sw or ld/sd. Finally a few constants to deal with
register offsets are also provided.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
With the upcoming riscv64 support, it is best to use "riscv" as the
subdirectory name and common symbols as riscv32 and riscv64 support
code is almost identical. Then later decide whether 32-bit or 64-bit
compilation is wanted.
Redirects for the web documentation are also included.
Then zephyrbot complained about this:
"
New files added that are not covered in CODEOWNERS:
dts/riscv/microsemi-miv.dtsi
dts/riscv/riscv32-fe310.dtsi
Please add one or more entries in the CODEOWNERS file to cover
those files
"
So I assigned them to those who created them. Feel free to readjust
as necessary.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
These defines are specific to the Cortex-M. Move them to their own
header file to prepare for Cortex-R support.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
ARCv2 cores may access data not aligned by the data size boundary.
I.e. read entire 32-bit word from address 0x1.
This feature is configurable for ARC EM cores excluding those with
secure shield 2+2 mode. When it's available in hardware it's required
to enable that feature in run-time as well setting status32.AD bit.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Because NXP MPU's regions are dynamically enabled/disabled, USB
device's access maybe restricted when switching out of a task.
Background DMA transfers to/from RAM may happen during MPU region
reconfiguration or core idling.
Enabled USB (Kinetis MPU Master 4) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
This is now called z_arch_esf_t, conforming to our naming
convention.
This needs to remain a typedef due to how our offset generation
header mechanism works.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We had a function that did this, but it was dead code.
Move to fatal.c and call from z_arm_fatal_error().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* z_NanoFatalErrorHandler() is now moved to common kernel code
and renamed z_fatal_error(). Arches dump arch-specific info
before calling.
* z_SysFatalErrorHandler() is now moved to common kernel code
and renamed k_sys_fatal_error_handler(). It is now much simpler;
the default policy is simply to lock interrupts and halt the system.
If an implementation of this function returns, then the currently
running thread is aborted.
* New arch-specific APIs introduced:
- z_arch_system_halt() simply powers off or halts the system.
* We now have a standard set of fatal exception reason codes,
namespaced under K_ERR_*
* CONFIG_SIMPLE_FATAL_ERROR_HANDLER deleted
* LOG_PANIC() calls moved to k_sys_fatal_error_handler()
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We are standardizing to a arch-independent set of exception
reason codes, don't overload it with internal state of
the ARM fault handling code.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit adds a DTCM (Device Tightly Coupled Memory) section for
Cortex F7 MCUs. The Address and length is defined in the corresponding
device tree file.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
When code relocation enabled, there will be serval regions holding
text. And then there will be function call between these .text
regions, when distance between caller and callee is too far, linker
will automatically generate and insert veneer functions. And these
veneer functions will be located right after the last instruction
in the .text region by the linker. So these code will be put in the
memory reserved for priv_stacks text and kobject text if they don't
consume all the reserved memory. Or the veneer functions will be put
before the reserved memory if there isn't code in the reserved
memory. And then in the user mode building process, there will be
different memory layout and it will cause usr mode not working.
And moving the memory reserved for priv_stacks text and kobject text
at the beginning of .text will avoid above problem. The detailed
analysis for this issue can be found on Github issue #17038.
Fixes: #17038.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Because NXP MPU's regions are dynamically enabled/disabled, ENET
device's access maybe restricted when switching out of a task.
Background DMA transfers from RAM to MAC/PHY may happen during MPU
region reconfiguration or core idling.
Enabled ENET (Kinetis MPU Master 3) to always have access to RAM address
space.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Don't allow inadvertent use of the existing z_x86_msr_read() when
compiled in long mode (CONFIG_X86_LONGMODE) as it won't work.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inlines currently only apply to IA32, so place accordingly.
Minor changes to direct and indirect users of the file for ordering.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is only included from arch.h, so merge it into same. This
also avoids confusion with files in arch/x86/include/ of the same name.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The compiler is going to make better per-arch/per-implementation
choices about bit operations, so let's use the common definitions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This header is currently IA32-specific, so move it into the subarch
directory and update references to it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Making room for the Intel64 subarch in this tree. This header is
32-bit specific and so it's relocated, and references rewritten
to find it in its new location.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is currently IA32-specific, so it is moved and the
reference to it at the arch-independent layer is moved.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Eliminate definitions for MSRs that we don't use. Centralize the
definitions for the MSRs that we do use, including their fields.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This pattern exists in both the include/arch/x86 and arch/x86/include
trees. This indirection is historic and unnecessary, as all supported
toolchains for x86 support gas/gcc-style inline assembly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix path for system_timer.h and loapic.h, we moved it to
include/drivers/timer/ and include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move internal and architecture specific headers from include/drivers to
subfolder for interrupt_controller:
include/drivers/interrupt_controller/
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was only enabled by the MVIC, which in turn was only used
by the Quark D2000, which has been removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The Quark D2000 is the only x86 with an MVIC, and since support for
it has been dropped, the interrupt controller is orphaned. Removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
We introduce a new define to describe the alignment for a
privilege stack buffer. This macro definition is used by the
privilege stack generation script, to determine the required
alignment of threads' privilege stacks when building with
support for user mode.
We cannot use Z_THREAD_MIN_STACK_ALIGN in this case, because
the privilege stacks do not need to respect the minimum MPU
region alignment requirement, unless, of course, this is
enforced via the MPU Stack Guard feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit re-organizes the macro definitions in arch.h for
the ARM architecture. In particular, the commit:
- defines the minimum alignment requirement for thread stacks,
that is, excluding alignment requirement for (possible)
MPU stack guards.
- defines convenience macros for the MPU stack guard align and
size for threads using the FP services under Shared registers
mode (CONFIG_FP_SHARING=y). For that, a hidden Kconfig option
is defined in arch/arm/core/cortex_m/mpu/Kconfig.
- enforces stack alignment with a wide MPU stack guard (128
bytes) under CONFIG_FP_SHARING=y for the ARMv7-M architecture,
which requires start address alignment with power-of-two and
region size.
The commit does not change the amount of stack that is reserved
with K_THREAD_STACK_DEFINE; it only determines the stack buffer
alignment as explained above.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These constants do not need global exposure, as they're only
referenced in the reboot API implementation. Also their names
are trimmed to fit into the X86-arch-specific namespace.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The only we support cores that don't have CMOV insns are the MINUTEIAs,
so we simply check for that rather this using a layer of indirection.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This commit adds the architecture-specific implementation
of k_float_disable() for ARM and x86.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
MSRs related to x2APIC will never be accessed directly by name, but
rather via an offset from a base MSR, so the definitions are removed
from msr.h.
New local APIC accessor functions, which are sensitive to xAPIC vs
x2APIC mode (CONFIG_X2APIC), are added to include/drivers/loapic.h.
These accessors use the MSR definitions as modified above.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The real-mode startup code is trivially changed to refer to MSR
definitions in include/arch/x86/msr.h, rather than its ad-hoc ones.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Light reorganization. All MSR definitions and manipulation functions
are consolidated into one header. The names are changed to use an
X86_* prefix instead of IA32_* which is misleading/incorrect.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
A basic display driver is added for a generic 32-bpp framebuffer.
Glue logic is added to the x86 arch to request the intitialization
of a linear framebuffer by the Multiboot loader (GRUB) and connect
it to this generic driver.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
When booting using GRUB, some useful information about the environment
is given to us via a boot information structure. We've not made any
use of this information so far, but the x86 framebuffer driver will.
A skeletal definition of the structure is given, and provisions are
made to preserve its contents at boot if the configuration requires it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
All architectures declare those variables the same way, no need to
define them per arch, instead put them in common. If someone deviates,
they can create their own header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We had architectures doing this differently, some had a dedicated
sys_io.h file, some not. Unify how it is done by splitting the arch
specific sys_io implementation into a sys_io file and include it
instead.
Move bits_portable.h to arch/common and split the file so more
architecture can reuse some of the definitions here instead of
duplicating code.
Where applicable use the common sys_io/ffs definitions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's useful to be able to inspect the key returned from
z_arch_irq_unlock() to see if interrupts were enabled at the point
where z_arch_irq_lock() was called. Architectures tend to represent
this is a simple way that doesn't require platform assembly to
inspect.
Adds a simple test to kernel/common that validates this predicate with
a nested lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
We do have a multi-architecture latency benchmark now, this one was x86
only, was never used or compiled in and is out-dated.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
STM32WB HCI driver requires definition of 2 RAM regions to support
use of 3 shared memory sections: MAPPING_TABLE, MB_MEM1 and MB_MEM2.
In linker.ld, under conditions of HCI driver to be enabled,
define SRAM1 and SRAM2 based on input defined in stm32wb linker.
Then define the 3 sections MAPPING_TABLE, MB_MEM1 and MB_MEM
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
arm_core_mpu_dev.h is an internal API, and is not supposed to
be directly called by kernel / application functions, therefore,
we can move it inside arch/arm/core/cortex_m/mpu directory.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add ifdefs to handle the nrf91 case. This change will dynamically
place and size the NSC region according to nrf91 HW limitations.
Add Cmake check of NSC offset if manually set.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Non-XIP system with FLASH_SIZE = 0 is no-flash system. And no-flash
system makes text, rodata, and data all in SRAM, so define the marco
ROM_ADDR to RAM_ADDR.
Fixes: #16027.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
on non-XIP system, SRAM is the default region, and relocated .data
section and .bss section of SRAM shouldn't be inserted between
_image_rom_start and _image_rom_end, because the memory region between
_image_rom_start and _image_rom_end will construct the mpu ro region.
Also for the newly added memory region on non-XIP system, the
relocated .text secition and .rodata section should also be mpu aligned.
Fixes: #16090.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Allows snippets to be placed in different locations:
- The noinit, rwdata and rodata output sections
- Two different locations for placing custom output sections,
one location for RAM and another for all other sections.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
The compiler was generating errors of the form
error: "CONFIG_ZERO_LATENCY_IRQS" is not defined, evaluates to 0
[-Werror=undef] when -Wundef is used and the config option was turned
off. Change check to ifdef.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Delete memory-related configs from defconfig and use device tree based
macros in general riscv32 linker script instead of Kconfig ones.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
The ARM Cortex-M Exception Stack Frame (ESF) may consist of
several stack frame contexts (basic state context, additional
state context, FP context, etc.). To reflect these structural
properties, this commit re-factors the ESF, splitting out the
basic stack frame, holding the state context, into its own
struct container. The commit does not introduce behavioral
changes.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
