Use the `arduino,uno-adc` mapping to change the settings
to make it easier to understand.
Add available A4 and A5 pins.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Pinoroni Pico Plus2 is an RP2350B based board that has
more rich I/O, RAM, and Flash than the original Raspberry Pi Pico2.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
nucleo_C071rb overlay file contains all ADC node configurations
to be able to run the sample.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Move overlays and conf from boards to socs in following samples :
- samples/drivers/adc/adc_dt
- samples/drivers/counter/alarm
- samples/drivers/dac
- samples/subsys/settings
Signed-off-by: Marek Matej <marek.matej@espressif.com>
add more samples
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add support for xg24_rb4187c to the ADC sample app. Configure two
channels, one measuring the AVDD supply against the 1.21V bandgap
reference, and one measuring pin PB1 (wired to button 0) against
the AVDD (VDDX) reference.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Remove ADC2 support (identified as adc1 entry)
for additional ESP32-C3 based board targets.
Other boards have those instances already deleted.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add overlays for nrf54h20dk_nrf54h20_cpuppr. Moved common configuration
for nrf54h20dk to nrf54h20dk_nrf54h20_common.dtsi. Add configuration
for vpr_launcher on nrf54h20dk_nrf54h20_cpuapp.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
This examples shows how to use the AD4114 ADC on a
stm32f3_disco board.
As the AD4114 is a 24bits ADC resolution we need to be able
to pass 32bits buffer to get the samples.
CONFIG_SEQUENCE_RESOLUTION is set to 12 instead of 24, and the
gain zephyr,vref-mv is adapted to avoid overflows using the
exisiting adc_raw_to_millivolts function.
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
The Raspberry Pi Pico 2's device is compatible with the existing Pico 1.
The build system requires a `<board>.overlay` file, but these use the
pre-processing to #include the sibling rpi_pico.overlay files rather
than duplicating the contents as an attempt to keep things DRY.
Tested locally.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
A valid device tree configuration is provided for the ADCs of the 8 input
channels and the sample adc_dt works out of the box. Obviously this is
not the only possible configuration but it provides a good template for
further customization without the need to lookup the ADC GPIOs and
connections in the schematics.
Signed-off-by: Federico Di Gregorio <fog@dndg.it>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs and samples shall showcase that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The overlay was in the root of the sample folder instead of the boards
folder. This is clearly a mistake.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
A collection of simple enablements to match some of the enablement
done for rd_rw612_bga as closely as possible on the frdm_rw612 board.
- i2c
- spi
- dma
- mrt
- ctimer
- os timer
- dac
- adc
- trng (alread was enabled but now listed support)
- watchdog
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Rename all Silicon Labs starter kits to always use the official kit name
as board target name. Previous kit names used various naming schemes,
including putting part of the SoC name in the board name. With HWMv2,
SoC names (if needed) should go in the SoC board qualifier.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
