Not sure why this wasn't caught before but this sample needs a unique name
It conflicts with drivers/uart/echo_bot/README.rst
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Add ULP directory for samples related to the
Ultra Low Power Coprocessor.
Add a sample to demonstrate the debug process of the LP Core
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Makes the sample build only in automatic test CI
Running on the nucleo_f411re board requires hsi enable
Running on the nucleo_wba55cg can still output the console
on the usart1 Tx even if the usart1Rx is used by the MCO output
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add printing reset reason at the beginning of the sample. Makes it easier
to determine if sample correctly wakes up from LP mode.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
This reverts commit 99e7223a1c.
Breaks CI with the following compilation error in SPI.c:52:
error: 'SPI_MASTER' undeclared here (not in a function)
Failing tests (cc3220sf_launchxl/cc3220sf)
- sample.net.sockets.echo.offload.simplelink
- sample.net.sockets.http_get.offload.simplelink
- sample.net.wifi
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- It seems that the mask variants of GPIO functions are not present in
the latest sdk, so replace those with direct register access.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Make this sample build/run on something that is supported.
depends_on was causing this to be completely left out.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding board bbc_microbit_v2 overlay to pong example. This change
mainly enables to buzzer functionality of the example.
Signed-off-by: João Castilho <jpccastilho1999@gmail.com>
Currently, the soc/stm32/ccm.ld is not handled in
CMAKE_LINKER_GENERATOR.
This commit adds support, making STM32 supportable by
alternative linkers such as AC6 and IAR.
This commit also renames a variable to match all other
LOADADDR symbols.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
This commit removes the flexram,bank-spec property from dtsi files.
The property causes flexram to be dynamically configured based on
the configuration in flexram,bank-spec. This is a problem for 2 reasons:
1) The FlexRAM will always be dynamically reconfigured to default
fuse configuration. This is unnecessary if using default fuses.
2) If a user decides to program fuses. The FlexRAM will still be
reconfigured to the default fuse configuration.
Modify description in the binding to show how to use the property at:
dts/bindings/memory-controllers/nxp,flexram.yaml
Added board overlay to mimxrt1170_evk_cm7 magic_addr:
samples/boards/nxp/mimxrt1170_evk_cm7/magic_addr/boards
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Fixes a bug in nrfx spi when used in modes where only MOSI is needed such
as driving a WS2812. In this mode NRFX_ASSERT() is triggered when sck pin
is configured as no-connect.
Signed-off-by: Anthony Williams <anthony289478@gmail.com>
Added overlay and modified sample.yaml to support the nucleo_wba55cg
board in the MCO example. Due to GPIO conflict, UART print out is not
functional.
Signed-off-by: Lubos Koudelka <lubos.koudelka@st.com>
The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
samples, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added support for the nucleo_wba55cg board to the uart/single_wire example.
- Updated the overlay file to configure USART2 and LPUART1 for single-wire
mode.
- Modified sample.yaml to include nucleo_wba55cg in the list of supported
boards.
- Updated README.rst to provide generic, board-agnostic instructions for
building and running the application.
Signed-off-by: Lubos Koudelka <lubos.koudelka@st.com>
nRF5340 SoC supports retained_mem driver, which can be
utilized for RAM retention in System OFF sleep mode.
Add sample configuration confirming this.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
-Mbed TLS requires common.h to build. The sample provides common.h
in sample folder level but included the path to zephyr_interface.
This commit changes the include to be sample-specific
Signed-off-by: Frank Audun Kvamtrø <frank.kvamtro@nordicsemi.no>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add the nucleo_wba55cg board, which implements continuous transfer
with GPDMA and a linked list.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Application won't wakeup without external trigger in
the analog comparator wakeup configuration.
Therefore removing post-wakeup lines from sample regex as they are not
expected to occur in default testing scenario (without external triggers).
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This sample is designed specifically for the STM32 family.
With this filter, tests on other vendors' platforms will
be skipped.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Includes a RTC attribute as counter value to demonstrate
data being kept in memory after deep sleep reset.
This is only valid when MCUboot is enabled.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add initial support for the RP2350's PIO peripherals, extend the
existing example under samples/boards/raspberrypi/rpi_pico/uart_pio to
demonstrate this on the Raspberry Pi Pico 2, and update the board's
documentation.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
Signed-off-by: Manuel Aebischer <manuel.aebischer@belden.com>
Using bare-metal approach for retention configuration
is no longer compatible with sys_poweroff() implementation.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Convert qspi and hyperflash to variants instead of revisions by popular
demand.
And convert evkb into a revision instead of a different board.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
using "dt_node_prop_enabled" to filter out supported platforms
1. check node existing.
2. check prop in node.
3. check the prop is True.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
