Removes the CIS connection establishment from bt_bap_stream_start
and move the behavior to a new funciton bt_bap_stream_connect.
This has 2 advantages:
1) The behavior of bt_bap_stream_start is much more clear and more aligned
with the spec's behavior for the receiver start ready opcode.
2) It is possible to connect streams in both the enabling
and the QoS configured state with bt_bap_stream_connect as
per the spec. This allows us to pass additional PTS test cases.
To implement this new behavior, samples and tests have been updated.
The CAP Initiator implementation has also been updated
to accomodate for the change in BAP, but the CAP
initiator implementation should work the same for application, except
that it's now possible to do unicast start on ASEs in any order
(https://github.com/zephyrproject-rtos/zephyr/issues/72138).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The struct and its fields were poorly documented.
The new documentation should she some light on when the fields
can be modified.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Allow mDNS resolver and responder to to be used at the same
time so that both can use the port 5353. This requires
a DNS traffic dispatcher which affects also the normal DNS
resolver.
Fixes#72553
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The function is useful for application to lookup set
members from bt_conn pointers, e.g. when iterating on
connected devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add RISC-V architecture specific atomic instructions, not present in
atomic_builtin.h
Signed-off-by: Aleksandar Cecaric <aleksandar.cecaric@nextsilicon.com>
In the current implementation, the LLEXT linker will only apply
relocations targeting a given symbol if it has a specfic symbol type.
This is overzealous and causes issues on some platforms, as some symbols
that need to be relocated are skipped due to being of a "bad" type.
Ignore the symbol type when performing relocation to solve this problem,
but also add checks to ensure we don't attempt to relocate symbols with
an invalid section index. If such a relocation is found, return an error
instead of ignoring the relocation entry to ensure that it is impossible
to execute code from a (partially) unrelocated LLEXT.
Also remove all hacks added to circumvent this issue:
* qemu_cortex_r5 exclusion from test cases
* unnecessary exclusion of some flags when building with LLEXT EDK
Fixes#72832.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add a new shell backend implemented over a shared memory window
on the Intel audio DSPs. The implementation uses the Zephyr winstream
to manage the data streaming.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
This duplicates the functionality of device_is_ready.
Calls for z_device_is_ready are being done in kernel mode, so it is
safe to call its implementation directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This commit has added new flag FS_O_TRUNC to support truncation
during file open. Modified fs_open to handle truncation based on
provided flags. Included unit tests for flag behavior with common
filesystems.
Signed-off-by: RAJAGOPALAN GANGADHARAN <g.raju2000@gmail.com>
Employs the same linkonce magic of sw_isr_table to fix the
multiple definition of the symtab variables issue that I
get in my application build that doesn't use `west`.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
`start_addr` is the address of the first symbol, rename it to
`first_addr` instead as it seems more intuitive and relatable
to the comments.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
When building partially linked / relocatable objects no ELF segments
are created and it becomes more difficult to predict which sections
the compiler will build and use. In this case a .data.rel.local
section is created by the compiler and it is needed to link .rodata
strings in a twister test. We can handle arbitrary sections at run-
time if .peek() is supported. If it isn't we need to allocate and
copy the section. For now we simply error out in such cases. Fixing
that would represent a larger change and can be done incrementally.
This also fixes the relocation calculation to point to the correct
symbol address instead of the memory location, where it's currently
residing, because that can be a temporary buffer as is the case with
SOF.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Rename the current sensor_read to sensor_read_async_pool and create a
new blocking sensor_read helper.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Remove the deprecated uart_mux and gsm_mux modules and all of
their configurations/dependencies across zephyr.
Optimally uart_mux and gsm_mux would be removed in their own
respective PRs, but the two modules are directly coupled, so
to preserve bisectability, they must be removed together.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
When running clang-tidy, an 'ineffective bitwise and operation' (type
misc-redundant-expression) was detected on Z_CBPRINTF_IS_PCHAR macro.
As this behavior is expected, we are adding comment to ignore this macro
for the specific misc-redundant-expression check of clang-tidy
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
When running clang-tidy and logging module is used through any of the
LOG_ macro, an issue was raised in Z_CBPRINTF_PACK_ARG2 macro.
A uint32_t variable was copied into a _rws_buffer array with an implicit
cast (error: implicit conversion loses integer precision: 'uint32_t'
(aka 'unsigned int') to 'uint8_t' (aka 'unsigned char')).
Here we are adding an explicit cast to get rid of the implicit
conversion error.
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
Support to set BSS parameter "max_num_sta" at compile and run time
Added support to configure `max_num_sta` BSS parameter.
Maximum number of stations allowed in station table. New stations will be
rejected after the station table is full.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support for configuration of AP parameter "Skip inactivity poll".
Only build time setting is supported.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter at compile and run time.
Added support to configure `max_inactivity` BSS parameter.
Station inactivity timeout is the period for which AP may keep a client
in associated state while there is no traffic from that particular client.
If a non-zero value is set, AP may choose to disassociate the
client after the timeout.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
The commit caches write_block_size and erase_value to stream flash
context, at init, to avoid calling Flash API multiple times
to get these values at various stages of code exectuion,
at run-time.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
This commit aligns the GRTC driver to changes introduced in
hal_nordic. Some of the features regarding GRTC sleep/wakeup
functionality has been modified and moved out to the nrfx
driver's code.
Signed-off-by: Adam Kondraciuk <adam.kondraciuk@nordicsemi.no>
Expectation: After calling `bt_disable()` it is possible to
use the Bluetooth APIs as if `bt_enable()` was never called.
This was not the case for `bt_id_create()`, it was not possible
to set the default identity. This prevented an application
developer to restart the stack as a different identity.
Keys also need to be cleared to avoid the following pattern:
1. Pair two devices
2. Central calls `bt_disable()` and `bt_enable()`.
The central will now generate a new identity address.
3. Connect the two devices.
4. Re-establish encryption. Now the central will try to use
the previously used keys. The procedure will fail
because the peripheral does not have any keys associated
with the new central address.
The API documentation is updated accordingly.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
when GPIO_INT_WAKEUP flag is used in a DT gpios property
the gpio_dt_flags_t var that holds the flags overflows
Hence moving GPIO_INT_WAKEUP flag from bit 28 to bit 6
Signed-off-by: Abderrahmane Jarmouni <abderrahmane.jarmouni-ext@st.com>
According to RFC3927 and RFC5227, an ARP probe target HW address should
be set to all-zeroes:
"The 'target hardware address' field is ignored and
SHOULD be set to all zeroes."
Hence, we should allow the ARP probes to have all-zeroes target HW
address as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
implement a2dp.c and avdtp.c
add a2dp related Kconfig:
BT_AVDTP_RTP_VERSION, BT_A2DP_SOURCE and BT_A2DP_SINK
a2dp_codec_sbc.c/h are used to provide some APIs to get
A2DP SBC codec information. (like: channel num).
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Add flag STM32_DMA_16BITS as a combination of
STM32_DMA_PERIPH_16BITS and STM32_DMA_MEM_16BITS
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Add APIs for changing the contents of modem chat matches
safely at runtime.
This allows for reusing a single modem_chat_match at the cost
of placing the match and its buffers in RAM.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Change the implementation of net_ipv6_is_addr_mcast_scope() inline
function that let us check if a given IPv6 address has a specified
scope. Previously, it was comparing the whole byte including flags
of a multicast address. It meant, that while checking for a specific
scope a one was also checking the flags. Even in Zephyr's net stack
there are checks for a IPv6 link local scope that are failing for
addresses that are not marked as "well known" (when least significant
bit of the flags is set).
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
