The dhcpv4 state machine has a dedicated context within each net_if
structure. For reasons unknown the timers used by the dhcpv4 state
machine have been placed in net_if outside of the dhcpv4 context area.
Relocate them into the dhcpv4 context.
Change-Id: I0531f493610dffda9ca9208993597a5665bde997
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
From the response of read_local_supported_feaatures check if local
device supports eSCO packet type and update it to bt_dev.
Also added sco field in bt_dev
Change-Id: If85b3d24d327a6243318fad89a07375a8253f89b
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
__ZEPHYR__ preprocessor macro is a way for a (cross-platform)
application to test if it's built for Zephyr. Currently it's defined
by Makefile, so if an app uses it's own build system, it won't be
available. So, define it in the standard header too to cover such
a case.
Change-Id: Id708d1f20fe3b415968ad8475da449f54ad3c3fb
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This allows to queue buffer to sent later in case it runs out of
credits so it no longer blocks the caller thread.
Jira: ZEP-1776
Change-Id: Ifa9b412f98889b50c0b889655d910520d11a4718
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for detecting version 5.0, i.e. 0x09.
Change-Id: Ia2da513b65c420142fe97a4fa173bfa8045e9d75
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
bt_gatt_get_mtu can be useful when GATT is used to transport another
protocol on top.
Change-Id: I328ef49138ccc4ce642b0019d08060f6022d5aa7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Separate out data element structure header into type and size fields
Change-Id: I869ee1ea82db1f6d669bb905055135b7d63f3fa2
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Added structure to account for the preset. The user can use the
SBC codec.
Change-Id: Ia2466b6fc166cae919f82a8042f4dd047ed28772
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Added an API to allow addition of stream end points by the application.
Change-Id: I91b95fc5dc3b9b2950e8d55b5846e460e55f2453
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
Current users of sys_bitfield*() are bending over backwards to cast
what is most of the times a pointer into an integer.
Bitfields can be better described with an void *, so
uint{8,16,32,64}_t or any other container can be used. Most
sys_bitfield*() operations, by extension, can do the same. Note void *
has byte arithmetic, like char *.
This change will also make it implicit, for any future split of the
address space between virtual (what the SW is seeing) and physical
(what the HW is seeing) way clearer, as the functions dealing with
physical, non directly referentiable/mappeable addreses to use an
integer type, like mem_addr_t.
- include/arch/ARCH/*asm_inline*:
- sys_bitfield*() all modified to take 'void *'
Note 'void *' arihtmethic is byte based, which makes some things
easier.
- include/sys_io.h:
- introduces DEFINE_BITFIELD
- update docs
- tests/kernel/bitfield: remove all the cast contortions, use DEFINE_BITFIELD
PENDING: update other TCs
- include/arch/nios/nios2.h, drivers/interrupt_controller/ioapic_intr.c:
remove cast contortions
Change-Id: I901e62c76af46f26ff0d29cdc37099597f884511
Jira: ZEP-1347
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Once all users of k_lifo migrate to k_queue this should no longer be
needed.
Change-Id: Ib8af40c57bf8feba7b06d6d891cfa57b44faad42
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes k_fifo functions rely on k_queue and port k_poll to use
k_queue directly.
Once all users of k_fifo migrate to k_queue this should no longer be
needed.
Change-Id: Icf16d580f88d11b2cb89e1abd23ae314f43dbd20
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This unifies k_fifo and k_lifo APIs thus making it more flexible regarding
where the data elements are inserted.
Change-Id: Icd6e2f62fc8b374c8273bb763409e9e22c40f9f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It's not entirely clear where the '%P' came from, but the proper,
documented operand modifier for inserting an immediate value without
punctuation is '%c'.
Change-Id: I17346a6c70183ce79e91faa2fbe61e7761dfd513
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Documentation comments should begin with /**
Change-Id: I59867e8aad340dac4d66f86e09f4f8ae9d3d75fb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
If IPv6 address is generated from Bluetooth MAC address,
then the Universal/Local bit must not be toggled or touched
at all. See RFC 7668 ch 3.2.2 for details.
Because this change is not compatible with older Linux kernel
BT IPSP support, the old behavior can be enabled by setting
CONFIG_NET_L2_BLUETOOTH_ZEP1656 option.
Change-Id: I05d48723b70f1eb60fbd46107ef6a2a4e8f9154a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that the buffer waiting for retransmission is modified
after it is sent, for example, it can be compacted by 6lo, and our
assumption of where is the message ID is located in the buffer is no
longer valid.
As the message ID is the only information that is necessary for
keeping track of retransmissions, we keep a copy of it in the pending
struct, as well as the destination address of the retransmission.
Change-Id: Id33d54353404628673541225a1a05e27ee08765f
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Some GPIO ports activation where missing since not used
on available soc/boards.
Since stm32 family increases, activation of these ports
should be made available.
Jira: ZEP-1551
Change-Id: I612d135b28ef255bc771599e33796671ff81d0ac
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Currently, ARM Cortex-M image ROMs are linked starting at the flash
device's base address (CONFIG_FLASH_BASE_ADDRESS). This prevents XIP
Zephyr applications from being linked to run from elsewhere on the
flash device. Linking Zephyr applications to run from elsewhere can be
necessary when running under a bootloader (i.e., booting into a Zephyr
application from a bootloader, not using Zephyr as a bootloader).
To enable this use case, add a new config option: FLASH_LOAD_OFFSET.
This option directs the linker to treat ROM as if it started that many
bytes from the base of flash on Cortex-M targets. The option defaults
to zero to preserve backwards compatibility.
Change-Id: I64f82aee257c19c2451f9789b0ab56999775b761
Signed-off-by: Marti Bolivar <marti.bolivar@linaro.org>
In order to see who is freeing the fragment, add function
and line information to net_buf_frag_del() when net_buf
debugging is activated.
Change-Id: I732f579fab2390cb16804cb35b83f46e65fca342
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 address is generated from IEEE 802.15.4 short address,
then the Universal/Local bit must be set to 0.
See RFC 6282 chapter 3.2.2 for details.
Change-Id: Ied38f40e807bdcd792570b331f6b99a6fcc7db1b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we know the network interface where the packet is about
to be sent, then set the link address type too.
The link address type is used when working with IPv6 link
local and auto configured addresses.
Change-Id: If086c3c413c025809cffa64311f973bc7bdac7db
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The interface L2 address type is set at the same time as the
L2 address is set to the network interface. This is most
convinient place to set the address type.
Change-Id: I712d7357d075959eb79df3463141cfbc6d163a74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to know what kind of address the L2 link address is,
add a type of the address into struct net_linkaddr.
Change-Id: Icd4cb0374219583689cf9ee204c0840cad8559e9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some files made it through review process with full license header.
Change-Id: I2722b127c40b4b19500042c12e4fde85a165bae9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This section was renamed to kinetis_flash_config, but it slipped back in
with the previous section_tags.h cleanup.
Change-Id: I4a2558aa70379a75c604f3617483680a35ed3d90
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
To be API-equivalent with doubly-linked lists.
Change-Id: I98b781f4c649e248abb04f660f686ad76d6b39de
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Like SYS_DLIST_FOR_EACH_NODE(), but __dn contains a node where to fetch
the next node from, NULL to start at the head.
Note that the function does not iterate from @a node, but from
node->next. This allows the following:
sys_dnode_t *funcA(sys_dlist_t *list, sys_dnode_t *node)
{
SYS_DLIST_ITERATE_FROM_NODE(list, node) {
if (node == <some condition>) {
return node;
}
}
return NULL;
}
sys_dlist_t list = &<some list>;
sys_dnode_t *node = NULL;
do {
node = funcA(list, node)
if (node == <some other condition>) {
goto found;
}
} while(node);
<handle error>
found:
<do stuff with node>
Change-Id: I17a5787594a0ed1a4745bd2e1557dd54895105ca
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Currently, for the following MQTT msg fields:
- client_id
- will_topic
- user_name
- topic
their length is computed inside the routine that receives the MQTT msg.
Although this simplifies development, also imposes one restriction:
data must be null-terminated. Sometimes, data is received from other
sources and not generated by the application, so the null-terminated
constraint may be considered problematic for the user.
This patch removes the assumption that string fields are null-terminated.
Current data structures are already prepared to handle this case, so no
API change is required.
Change-Id: I5a147a5b21e0da49541cbe62baac363c8737cd3e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Duplicate const specifier, it should be the pointed data that is const.
Jira: ZEP-1723
Change-Id: I194abb0fc9ad564c6d53e4727bd63c8099d4eb2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This implementation of _tsc_read returns a 64-bit value that
is derived from the 64-bit tick count multiplied by hwcycles per tick,
and then it adds the current value from the 32-bit timer.
This produces a 64-bit time. There is a bunch of math here, which
could be avoided if the CPU is built with Real-Time-Clock option.
EM Starter Kit SOCs don't have this. I don't think Arduino 101 does
either.
See ZEP-1559
Change-Id: I9f846d170246556ac40fe2f45809e457c6375d8c
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The interrupts would be placed at incorrect offsets on systems where
some interrupt vectors are reserved for exceptions, such as ARC.
Change-Id: I5b1f00eb9e8aecb84ae66e3d0461a734ffb5fbe6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds crypto API interface for interaction between applications
and crypto drivers. Encryption/Decryption APIs are defined
here.
Jira: ZEP-328
Change-Id: I1a534ae2a69c7e1c416fa78a2822c37040b225f6
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
