When generating syscall wrappers, call a tracing macro with the id,
name, and all parameters of the syscall as params when entering and
leaving the syscall. This can be disabled in certain call sites
by defining DISABLE_SYSCALL_TRACING which is useful for certain
tracing implementations which require syscalls themselves to work.
Notably some syscalls *cannot* be automatically traced this way and
headers where exclusions are set are in the gen_syscall.py as notracing.
Includes a systemview and test format implementation.
Tested with systemview, usb, and uart backends with the string
formatter using the tracing sample app.
Debugging the trace wrapper can be aided by setting the TRACE_DIAGNOSTIC
env var and rebuilding from scratch, a warning is issued for every
instance a syscall is traced.
Automatically generating a name mapping for SYSVIEW_Zephyr.txt is a
future item as is documenting how to capture and use the tracing data
generated.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Extend the timeout to prevent the cpp.libcxx.newlib_nano testcase runs
failed in acrn_ehl_crb, ehl_crb and up_squared. We need to give these
boards more time to finish the testcase's automation.
Fixes#36852
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Get flash device from flash area instead of the hardcoded
DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL. This makes the test
possible to be ran on device that has image_1 defined in
external flash.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Uses the stats subsys to provide simple but useful debugging stats for
power management state changes and timing.
Removes the no longer needed PM_DEBUG config option
Replaces the use of PM_DEBUG for a test clock output pin for mec1501 and
adds in its place an SoC Kconfig option to enable it.
Adds a STATS_SET macro for assigning a value to a stat group field
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Since the tests expects devices to change states, PM_STATE_RUNTIME_IDLE
can't be used. The first state that cares about devices is
PM_STATE_SUSPEND_TO_IDLE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There were some leftovers in logging after attempt to use
logging as tracing backend. Removing all references since it
lead to test compilation failures.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added log_internal.h for internal APIs. Move functions out of
log_core.h. Log_core.h shall have only macros and functions related
to logging message creation. Log_core.h is included by log.h thus
number of dependencies in that headers must be limited to minimum
to allow including without risk of circular dependencies.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
After doing some tests on Armv8R aarch64 board, the used stack memory
exceeds the stack size for about 64 bytes. Extending ZTEST_STACKSIZE
to 5120 can fix it.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
add a bitarray into struct osThreadDef_t to indicate whether the
thread is used or not, then we can get the first available thread
by searching this array when creating a new thread, and update this
array to add a free thread when terminating a thread.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Temporary disable logging-related failing tests on qemu_arc_hs6x
until we fix the rootcause so we can enable qemu_arc_hs6x in
upstream verification.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Add cpp.libcxx.arcmwdtlib to test C++ library from MWDT
toolchain (with MWDT C library)
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is now failing an edtlib check for unknown vendor prefixes.
I can't find a reason to use a vendor prefix in application-local
bindings like this, so just remove it wherever it appears by
normalizing to test-foo-compat instead of test,foo_compat or
test,foo-compat.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Test for dropping log messages was expecting certain number of
dropped messages assuming that buffer size is dividable by the
message size. That was not the case when timestamp was 64 bit.
In that case, additional message is dropped.
Modified the test to take that into account.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a real board/SoC that supports power mgmt on the STM32 side to
get some additional coverage and hopefully catch any build issues
in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Define SoC hooks as weak symbols so this way applications can
overwritten them defining strong symbols.
The problem is that currently SoCs are defining these interfaces as
strong symbol inhibiting the possibility of applications bring their
own implementation.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In order to increase test coverage, this commit updates the libcxx test
to run with both full and nano variants of the newlib.
Note that C++ exception handling feature is only enabled for the newlib
full variant because the nano variant does not support C++ exception
handling.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use the full version of newlib (i.e. not nano) for libcxx testing since
some features (e.g. C++ exception handling) require the full version of
newlib.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This board was added to test coverage feature when coverage was
introduced. This is now being testing with other boards and
configurations on a regular basis, so no need for this extra overhead in
CI.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit updates the filter for cpp.libcxx.exceptions test to allow
testing on all architectures except the ones that are known to be
broken (see #32448).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Increasing ZTEST_STACKSIZE to 4096.
This ensures that the riscv32 platforms can succesfully execute the
C++ exception test cases.
Also add the following platforms to allow list:
- qemu_arc_em
- qemu_arc_hs
- qemu_cortex_m0
- qemu_cortex_m3
- qemu_cortex_r5
- qemu_riscv32
- qemu_x86
- qemu_xtensa
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Most APIs have the default synchronous and an asynchronous version
with the sufix _async because that is the most common use.
All devices in tree right now are using the synchronous version, so
just change it to be consistent with the rest of the system.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
