With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/bluetooth and drivers/bluetooth/hci settings having
`[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When reaching the last model in the circular extension linked list, the
walker would abandon the walk before checking the last model. This makes
us skip models when checking the subscription list, potentially causing
incoming messages to be wrongfully ignored.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
bt_mesh_proxy_role_setup() is called conditionally when peer is
connected and gatt_disconnected() is always called. This leads
to unbalance in role->conn reference count and crash.
Instead of hot-fixing this in gatt_disconnected(), this commit adds
proper bt_mesh_proxy_role_cleanup() API that is called by roles
implementations if cleanup is needed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
It seems that if the IV update is missed, a node cannot
recover it until the IV index has increased to a value
greater than Node's Last known IV + 1.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Local public key has been logged in little endian but
remote public key in big endian. That has been changed.
Both are logged in big endian to be able to compare in logs.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Debug configuration for prov and prov_device has been split
since prov general modul and it is used for provisioner as well.
It is not necessary to enable prov_device debugging
to debug provisioner.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add seperate config to control whether device name include in
pb-gatt advertising scan response data.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
we will no longer need the additional `disconnect` parameter,
such as we only process gatt database from disconnect handler.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
The current implementation has hidden dependencies that break
OOB authentication if provisioner does not have the configured
input or output fields used for device capabilities.
It didn't allow to pass several OOB authentication cases.
After refactoring provisioner behavior is independent to
provisionee settings.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
EAGAIN is used in some other places in the code, e.g. if node is not
provisioned when a model tries to send a message. This change helps to
differentiated if the acknowledged message timed out from other failers.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Th Configuration Server should respond with and Invalid AppKey Index
status code when the AppKey identified by AppKeyIndex is not known to
the node or is not bound to the model identified by the ModelIdentifier.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Zephyr Bluetooth Mesh move adv send cb to buf destructor
callback, There are two net_buf_pool define, one to adv.c
and ore to friend.c, we are missing destructor in friend.c.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When Public Key field is set to RFU value then we should send
Provisioning Fail with Invalid Format error.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
PR #35774 introduced a uuid field in the bt_mesh_cfg_mod_pub structure.
The shell does not initialize this pointer before passing it to the
access layer. Add a line to initialize this pointer.
Fixes#38016.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL here, so the check is redundant. Coverity is
complaining because param is accessed before the NULL check.
Fixes#37949.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL, so this check is redundant. Coverity complains
about this, as the param variable is accessed before the check, which
would be wrong if param could be NULL.
Fixes#37948.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This ensures that all mesh settings were removed from persistent storage
after node reset.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
unseg_app_sdu_decrypt decrypts messages in place using a single net_buf.
While this is safe in terms of data access, the buffer state is
manipulated with the assumption that they're two different buffers, and
the output buffer's length field is increased at the end. When
assertions are enabled and the pdu length is 11 or 12 bytes, this
triggers the net_buf length assert, as the decrypt function attempts to
add the pdu length to the out buffer, with the assumption that it was
reset before decryption was started.
Create a separate output buffer with len = 0 to avoid triggering the
assert. Improve readability of the unseg_app_sdu functions to highlight
the need for the additional buffer.
Fixes#37519.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
There is a problem with the previous method, that is,
we use the same label(bt_mesh_subnet_cb_subnet_evt) and
put it in the same section, which is not friendly for debugging.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
When device is first provisioned with IV Update
flag is set to 0, it should wait for minimum of
96 hours before going into IV Update In Progress
state. Such limit does not apply, if device is
provisioned with IV Update flag is set to 1.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Name length can't be longer than 8 bytes. This needs to be clarified
in the bt_mesh_model_data_store() documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The latest MESH.TS 1.0.1.2 4.15.10 Appkey List Procedures
MESH/NODE/CFG/AKL/BI-04-C
Verify that the IUT can respond to an Config AppKey Add
message with NetKeyIndex and AppKeyIndex already stored.
6. Repeat step 1 with the same AppKey, the same
AppKeyIndex, but NetKeyIndex field set to 0x001.
7. The Lower Tester expects the IUT to respond
with an Config AppKey Status message with the
Status field set to 0x04 (Invalid NetKey) and
the NetKeyIndex and AppKeyIndex values equal to
those sent in step 5.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Adds defines for ECC public keys, private keys, DH keys and key
coordinates. Replaces raw numbers throughout.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The existing extension tree does not support all the features that are
defined by the specification (e.g. multiple parents).
This patch approaches this problem by defining a circular single-linked
list of extension models. So for a given model, all models that are on
the same list as that model are in some extension relationship with that
model. All models on a list represent a single connected component of an
extension graph but without defining specific relationships between each
pair of models. This list is used to manage a shared subscription list
as per the Mesh Profile Specification:
```4.2.4 Subscription List
Within an element, each model has a separate instance of a Subscription
List, unless the model extends another model on that element. Instances
of models that extend other models (i.e., all models within an extension
relation tree) shall share a single instance of a Subscription List per
element.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
Added bt_mesh_msg_send() which can be used by the application to
directly send model layer messages without local instantiation of
related models. Also added bt_mesh_msg_cb_set() which allows the
application to recieve mesh model layer messages without local
instantiation of related models.
Added bt_mesh_has_addr() which returns a bool. For unicast addresses,
this returns whether or not bt_mesh_elem_find() was successfull. If the
above mentioned bt_mesh_msg_cb_set() has been used by the application to
set a message callback, this returns true so that the stack attempts to
push every model message up to the application via the callback. If no
callback has been set, group addresses are searched to see if the stack
should pass the message up the stack to an instantiated model.
These changes allow applications that do not or can not instantiate
models to interface with models in a mesh network. This is applicable to
applications which act as a Bluetooth mesh gateway, sniffer, debugger,
network monitoring, non-mesh relay/extender, etc.
In app_keys.c friend.c net.c bt_mesh_elem_find() is used only to
determine the existance of an address. The full return value of
bt_mesh_elem_find() is unecessary and so was replaced by the above
mentioned bt_mesh_has_addr() function in these instances.
Simplified bt_mesh_elem_find() by removing the search through group
address. Since the above mentioned bt_mesh_has_addr() function handles
instances where group addresses must be searched, it was no longer
necessary to preform this search in this function.
Signed-off-by: Bud Wandinger <bud@budkoembedded.ca>
