Fix extended advertising set remove and clear, to reset the
PDU double buffer to keep one initialized PDU. This is done
to prevent common extended payload format contents from
being overwritten and corrupted due to same primary PDU
buffer being used to remove AdvA if auxiliary PDU is
allocated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Reset allocated advertising and scan response PDUs to one
initial PDU in the double buffers when advertsing set is
removed or cleared.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all subsys/bluetooth and drivers/bluetooth/hci settings having
`[EXPERIMENTAL]` in their prompt has has been updated to include
`select EXPERIMENTAL` so that developers can enable warnings when
experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
There was an error in handling of max number of IQ reports
generated by controller. Accordin to BT Core Spec 5.1 the host
may request a number of CTEs to be sampled and reported by
controller while enable IQ sampling. The max_cte_count value
set to zero means sample all CTEs in a periodic advertising chain.
The commit fixes wrong handling of the max_cte_count provided
value to generate expected number of IQ reports.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
First implementation of periodic advertising sync filtering
requires existence of Direction Finding Extension in Radio
peripheral.
To add the filtering support for other Nodric SOCs software
based PDU traversing for CTEInfo should be implemented.
In case there is no DFE in Radio peripheral, actual filtering
is done in ULL.
The commit provides necessary changes to previous solution.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Follow up on changes in lower link layer to add filtering
of periodic advertisements synchronization by CTE type.
The NODE_RX_TYPE_SYNC is used to transport information that:
- Sync is established. In such situation the node_rx
includes data related with received PDU
- Sync scanning is terminated.
In first case ULL will generate NODE_RX_TYPE_SYNC_REPORT
after sending NODE_RX_TYPE_SYNC.
Also EVENT_DONE_EXTRA_TYPE_SYNC handling has additional
execution path that terminates sync scanning if requested
by lower link layer. In other case it adjusts sync scan
window and maintains timeout as usual.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Periodic advertisement synchronization may be filtered by CTE type.
If particular CTE type is not allowed then depening on filtering policy:
- if filtering policy is off synchronization if terminated
- if filtering policy is on synchronization is continued to
synchonize with another device from allowed adverisements list.
If synchronization is established and peer device changes CTE type
to one that is not allowed, synchronization should be maintained.
There are two new execution paths. First one is executed when
synchronization is created. In this case CTEILINE is enabled
to parse PDU for CTEInfo field. In this execution path CTE
type is verified. Second execution path does not include
parsing PDU for CTEInfo and verification of CTE type.
Information about sync allowed is added to node_rx instance
that transports received PDU data. In case the sync has to be
terminated the node_rx will not hold PDU data.
Also done event is extended with information about sync
termination if CTE type is not allowed and filtering
policy is off.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To enable runtime parsing of PDU to find CTEInfo field CTEINLINE mode
has to be enabled. Thanks to that it is possible to verify if the PDU
has allowed CTE type e.g. for periodic advertising synchornization.
To run CTEInfo parsing other parametrers of CTEINLINE are not relevant.
If Radio is set to disable after PDU END event the CTE sampling
will not be processed.
The commit moves the radio_df_cte_inline_set_enable function to make
it accessible even the direction finding features are disabled.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing code responsible for handling of allowed CTE types
in HCI_LE_Periodic_Advertising_Create_Sync command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Use __WFE and __SEV for CPU sleep in simulation too to
avoid stalling and to let ISRs execute during CPU sleep.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added weak function for data path dependent ISO-AL sink creation. This
is required for vendor specific ISO-AL data sink operation. Invoke sink
creation for vendor specific data path.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Introduce Kconfig for Read ISO Link Quality command. Support for the
command is optional according to the specification.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Reorder variable declarations in HCI command handlers of ISO-related
commands to conform to reverse Christmas tree style.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix use of handle field in HCI command handling for some ISO-related
commands. The response buffer may reuse the command buffer. Therefore,
the handle field must not be copied directly from the command to the
response.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Set bits for ISO-related supported commands depending on selected
features and adjust compilation guards for the respective handler
functions.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
When there are radio events with time reservations lower
than the preemption timeout of 1.5 ms, the pipeline has to
account for the maximum radio events that can be enqueued
during the preempt timeout duration. All these enqueued
events could be aborted in case of late scheduling needing
as many done event buffers.
During continuous scanning, there can be 1 active radio
event, 1 scan resume and 1 new scan prepare. If there are
peripheral prepares in addition, and due to late scheduling
all these will abort needing 4 done buffers.
If Extended Scanning is supported, then an additional
auxiliary scan event's prepare could be enqueued in the
pipeline during the preemption duration.
Fixes#36381.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor out the implementation of Periodic Sync Setup
address check including Periodic Advertiser List and SID.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor `ull_filter_adva_get` and `ull_filter_adva_get` to
input resolving index compare to adv context reference.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactoring related to filter accept list, resolving list,
and removed the redundant anon variable.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add unit tests that will ensure the CTE disable operation does not
cause breaking of LLL operations by too early release of chained PDUs.
The tests verify if numbers of PDUs in free PDUs fifo and free PDUs
memory pool are correct.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When CTE is enabled for periodic advertising and number of CTE is
greater than number of PDUs in a chain, that are needed to transport
advertising data, there are additional empty PDUs used for transport
CTE.
CTE transmission may be disabled when periodic advertising event is
pending in LLL. rem_cte_info_from_per_adv_chain removed CTEInfo field
from extended advertising header in chained PDUs. When there were found
empty PDUs (created to transport CTE only), they were released from
the chain that was currently used by LLL. That caused an assert in
isr_tx handler due to broken advertising chain.
The rem_cte_info_from_per_adv_chain may not relese PDUs that are in
use by LLL. The PDUs may be released by LLL in prepare step when
advertising pdu double buffer is swapped by lll_adv_sync_data_latest-
_get.
This PR fixes that issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix asserted in ULL due to incorrect resumption of scan
window when auxiliary channel chain PDU is LLL scheduled by
a ULL scheduled auxiliary channel PDU reception.
The issue is solved by having `is_chain_sched` flag in the
auxiliary channel scan context and using the already present
`is_aux_sched` in the primary channel scan context to
differentiate if the auxiliary PDU Rx ISR is to return back
to primary channel scan window or to close the auxiliary
chain PDU reception radio event.
Relates to #38146.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix to ignore aux pointer struct in scanning advertising, to
avoid ULL scheduling from setting up ticker to receive chain
PDUs while LLL is receiving scan response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation defined channel index in the auxiliary
pointer of the common extended payload format in the primary
channel PDUs and the same be used in the transmission of
auxiliary PDUs.
Fixes#35668.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add FIXME comments for missing use of channel selection
algorithm for Periodic Advertising chained PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to set correct Advertiser's clock
accuracy value in the auxiliary pointer field in the common
extended payload format.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to populate the aux, and sync offset
in the latest PDU. If both the current and latest of the
double buffer has been filled and LLL did not pick the
latest PDU, then the offset should be filled into the latest
PDU (and not into the first/current PDU).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for scanning state types of passive, active,
initiator and synchronization state.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Allow resolving list update when passive scanning,
otherwise deny if advertising, active scanning, initiating
or periodic sync create is active.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix imprecise data bus error when receiving Periodic
Advertising Report caused due to uninitialized `extra` field
member in the node rx struct passed from ULL to LL thread
context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix repeated periodic sync drift compensation invoked when
receiving chain PDUs which caused memory corruptions and
bus faults.
Use `is_aux_sched` flag in Periodic Sync's LLL context to
differentiate between the first AUX_SYNC_IND PDU followed by
use of LLL scheduling to receive following AUX_CHAIN_IND PDU
versus ULL scheduling being used to receive AUX_CHAIN_IND
PDUs.
Drift compensation to be done only using the AUX_SYNC_IND
PDU and not on reception of AUX_CHAIN_IND PDU using ULL
scheduling.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_FAST_ENC Kconfig help text to reflect the
current Encryption Setup Procedure behavior.
With the split architecture, Encryption Setup Procedure
will take 4 connection events when BT_CTLR_FAST_ENC is
enabled, in comparison to 3 connection events in the
legacy Controller architecture. This is due to split
architecture processes control procedures in the lower
priority Upper Linker Layer execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix deadlock in multiple peripheral connection in a device
due to redundant double reservation of node rx buffer during
crossover scenario in Data Length Update procedure.
Data Length Update resize state was reset back to response
wait state when peripheral received an acknowledgment to
local initiated Data Length Request PDU after having already
transitioned to resize state.
Implementation is designed to transition to resize state
under both Data Length Response reception and crossover
scenario of Data Length Request reception when procedure is
local initiated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When CONFIG_ARM_MPU is explicitly unset in application prj.conf there
were build warnings related with implicit declarations of following
symbols: NRF_DT_GPIOS_TO_PSEL, __WFE, __SEV.
Lack of NRF_DT_GPIOS_TO_PSEL lead to build error due to undeclared
dfegpio0_gpios symbol.
The cause for the warnings and error were missing soc.h includes in
few source files. The missing includes were added in this commit.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When calling ull_conn_iso_cis_stop with no pending LLL events,
cis_disabled_cb may be called recursively if more than one CIS is
associated with a disconnecting ACL connection.
To prevent ticker_stop being called more than once, it shall be
registered at entry of cis_disabled_cb whether this is the last CIS.
Only then shall ticker_stop be called.
Signed-off-by: Morten Priess <mtpr@oticon.com>
CIS LLL events pending was checked incorrectly using a
mayfly incorrect set to be called from ULL LOW context,
but the actual call was from ULL HIGH context.
Beside this, the code was refactored to have file static
functions after global scope functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the old master and slave prefixes with the new central and
peripehral ones from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
