Move related areas to their own files and order
documentation logically from lower to upper layer.
Fix gross errors and inconsistencies.
Co-authored-by: Carles Cufí <carles.cufi@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This reverts commit e53371bbc0bc37d911884937199733f23c43fb21.
The "usbd0 aliases" approach has not proven to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sample only supports device-to-host control requests.
Return -ENOTSUP on host-to-device control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses aliases and remove board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Fixes: #25313
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the new GPIO_DT_SPEC_GET_OR() macro to clean up the node detection
code by eliminating conditional compilation. This increases code
coverage on platforms where not all the devicetree nodes are
available.
Clean up some whitespace while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
HID report descriptor in the sample has unnecessarily output report
which is not used anywhere. This patch removes unnecessary report.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HID sample has on_idle callback implementation present in the code,
but has not turned on USB_DEVICE_SOF and so does not have
corresponding code in sample self and class/hid/core.c covered.
Also on_idle implementation in HID sample has not taken into
account send_report() which also calls hid_int_ep_write().
This patch enables USB_DEVICE_SOF and revises both on_idle and
the regular report function.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The commit adds initialization of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Exlude native_posix platform from USB samples but
add build-only test case.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
USB MSC sample has been expanded over time. Config overlays
for RAM disk and flash disks were added. Board specific overlays
followed. It was overlooked that they forced a specific
configuration for the nrf52840dk_nrf52840 board,
even if it was not explicitly desired
(for example RAM-disk). This also caused strange behaviour
during automatic MSC USB3CV tests (which explicit selects RAM-disk)
so that nrf5340dk_nrf5340_cpuapp board passed test
but nrf52840dk_nrf52840 failed.
Rework disk and file system configuration, and initialization
code, allow to use FAT file system on top of RAM disk.
This sample can be built with none or one of two supported
file systems, LittleFS or FATFS. Disk subsystem can be flash
or RAM based. LittleFS only works with flash disk.
There are four useful possibilities:
- RAM disk without any file system for testing (default)
- RAM disk with FAT file system
- flash disk with FAT file system
- flash disk with LittleFS
Flash disk configurations is only available (as before) for
nordic,qspi-nor compatible, but only need the device tree overlay
per platform without a config overlay.
This path also revises test cases.
Remove invalid "flash" tag from depends_on key.
Remove unnecessary gpio tag and exclude native platform.
Resolves: #26275
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
WebUSB sample is using BOS descriptor. Because of that
the bcdUSB field of device descriptor is set to 0x0210.
This requires for the BOS descriptor to have LPM support.
LPM support use additional descriptor that the HOST can
read by requesting BOS desc. The descriptor is called
Extension descriptor and is specified in `USB Link Power
Management ECN` document considered a part of USB 2.0
spec.
This patch adds missing part of the BOS descriptor and
fixes issue with webUSB sample not passing i'LPM L1 Suspend
Resume Test' from USB3CV test tool.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The legacy macros were first deprecated in Zephyr v2.3. Now that
Zephyr v2.4 has been released, that makes two releases where these
macros have been deprecated, so it's OK to remove them.
This leaves support for legacy binding syntax in place. Removing that
is left to future work.
We need to update various pieces of documentation related to flash
partitions that never got updated when the new API was introduced.
Consolidate this information in the flash_map.h API reference page,
since that's really where users will run into it. This also gives us
the opportunity to improve this documentation.
Adjust a couple of kconfigfunctions.py and sanitycheck bits to use
non-legacy edtlib APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
After HW stack protection option was globally enabled for
nRF SoCs turned out main stack size is too small for
USB mass storage sample. Increase to avoid overflow.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The test for this sample requires a usb connection to a secondary port,
output is not captured on the default usb port.
Fixes#28154
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
nRF53 application core does not have RNG peripheral.
Software implementation must be used instead.
This patch adds config overlay for hid-cdc nRF5340 sample.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add configuration and overlay files for Adafruit feather nRF52840.
README has also been updated and improved. Documentation related to
littlefs has been moved to an independent section as it could apply to
any sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make the flash-backed USB mass storage sample depend on usb_device and
flash instead of just flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
