Implement the iscntrl() function, which returns whether a character is a
control one or not.
Ref: https://en.cppreference.com/w/c/string/byte/iscntrl
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When the sof module code was build, it was found that
PI was not defined in the minimal library.
Here are some mathematical constant definitions to avoid build errors.
Signed-off-by: Yang XiaoHua <yangxiaohuamail@gmail.com>
When CONFIG_USERSPACE is turned off, the POOL_SECTION will be located in
.data section. This will increase the target binary size. Since the
memory pool is for malloc() use and it doesn't need for initial values,
locate it in the .bss section to reduce binary size.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: Iee52ac06a48414c083518c79775fe31334eab674
Suppress violation, because it is a deliberated deviation.
Noticed, that my previous PR #36420 comments were not correctly
detected by a static analysis tool. Only the first one item
"MISRAC2012-RULE_20_4-a" was detected and suppressed.
Change comment style, so each item will be suppressed.
Comment style defined in PR #36911 as the most suitable
for the analysis tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
rand() and srand() are pseudo-random number generator functions
defined in ISO C. This implementation uses the Linear Congruential
Generator (LCG) algorithm with the following parameters, which are the
same as used in GNU Libc "TYPE_0" algorithm.
Modulus 2^31
Multiplier 1103515245
Increment 12345
Output Bits 30..0
Note that the default algorithm used by GNU Libc is not TYPE_0, and
TYPE_0 should be selected first by an initstate() call as shown below.
All global variables in a C library must be routed to a memory
partition in order to be used by user-mode applications when
CONFIG_USERSPACE is enabled. Thus, srand_seed is marked as
such. z_libc_partition is originally used by the Newlib C library but
it's generic enough to be used by either the minimal libc or the
newlib.
All other functions in the Minimal C library, however, don't require
global variables/states. Unconditionally using z_libc_partition with
the minimal libc might be a problem for applications utilizing many
custom memory partitions on platforms with a limited number of MPU
regions (eg. Cortex M0/M3). This commit introduces a kconfig option
CONFIG_MINIMAL_LIBC_RAND so that applications can enable the
functions if needed. The option is disabled by default.
Because this commit _does_ implement rand() and srand(), our coding
guideline check on GitHub Action finds it as a violation.
Error: lib/libc/minimal/include/stdlib.h:45:WARNING: Violation to
rule 21.2 (Should not used a reserved identifier) - srand
But this is false positive.
The following is a simple test program for LCG with GNU Libc.
#include <stdio.h>
#include <stdlib.h>
int main()
{
static char state[8];
/* Switch GLIBC to use LCG/TYPE_0 generator type. */
initstate(0, state, sizeof(state));
srand(1); /* Or any other value. */
printf("%d\n", rand());
printf("%d\n", rand());
return 0;
}
See initstate(3p) for more detail about how to use LCG in GLIBC.
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
The current implementations of memcpy and memset are optimized for
performance and use a word based loop before the byte based loop.
Add a config option that skips the word based loop. This saves 120
bytes on the Cortex-M0+ which is worthwhile on small apps like a
bootloader.
Enable by default if SIZE_OPTIMIZATIONS is set.
Signed-off-by: Michael Hope <mlhx@google.com>
Add an explanation comment, so no one in the future
will try to change that part of the code.
Add parasoft tags to suppress a violation in static analysis tool
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
According to the Zephyr Coding Guideline all switch statements
shall be well-formed.
Added a default labels to switch-clauses without them.
Added comments to the empty default cases.
Found as a coding guideline violation (MISRA R16.1) by static
coding scanning tool.
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Our minimal C library makes an alias of UINT*_C() to
be __UINT*_C() and INT*_C() to __INT*_C(). However,
in mwdt, these are not defined by default, so define
them ourselves. We have similar fix for xcc: #31962
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Do basic preparations for building code for ARCv3 HS6x
* add ISA_ARCV3 and CPU_HS6X config options
* add off_t type support for __ARC64__
* use elf64-littlearc format for linking
* use arc64 mcpu for CPU_HS6X
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
- When malloc() is called with a size of 0 we should not set errno
to ENOMEM as there is no actual allocation failure in that case.
This duplicates the realloc() behavior.
- Put unlock_ret assignments on separate lines, otherwise gcc complains
about unused variables when the tests on it are disabled.
- There NULL return added in 952970d6cb are completely pointless.
First, there is no reason for sys_mutex_unlock() to fail, and even
if it did, those returns would be blatent memory leaks. Remove them.
No one should blindly modify code just to make static code
analysers happy.
- Replace all CHECKIF() by explicit assertion statements to uniformize
those checks and drop the NULL returns entirely. We can't return
anything in the free() case, and there are no runtime conditions
for sys_mutex_lock() to sometimes succeed and sometimes fail anyway.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The identifiers used in the declaration and definition of a function
shall be identical [MISRAC2012-RULE_8_3-b]
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix#32938 [Coverity CID :219508] "Unchecked return value in
lib/libc/minimal/source/stdlib/malloc.c"
The Coverity complains about sys_mutex_lock() which returns 0 if
locked. I added also the same check on returned value for
sys_mutex_unlock() which returns 0 if unlocked.
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Commit 40016a6a92 ("libc/minimal: Use a sys_heap for the malloc
implementation") replaced sys_mem_pool_alloc() with sys_heap_alloc().
The problem is that those aren't equivalent. While the former did
guard against concurrent usage, the later doesn't.
Add the same locking around sys_heap_alloc() that used to be implicit
with sys_mem_pool_alloc().
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The definition for realloc() says that it should return a pointer
to the allocated memory which is suitably aligned for any built-in
type.
Turn sys_heap_realloc() into a sys_heap_aligned_realloc() and use it
with __alignof__(z_max_align_t) to implement realloc() with proper
memory alignment for any platform.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The definition for malloc() says that it should return a pointer
to the allocated memory which is suitably aligned for any built-in
type. This requirement was lost in commit 0c15627cc1 ("lib: Remove
sys_mem_pool implementation") where the entire memory pool used to
have an explicit alignment of 16.
Fix this by allocating memory with sys_heap_aligned_alloc() using
__alignof__(z_max_align_t) which will automatically get the needed
alignment on each platform.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
reallocarray() is defined in terms of realloc(). From OpenBSD manual
pages:
"Designed for safe allocation of arrays, the reallocarray()
function is similar to realloc() except it operates on nmemb
members of size size and checks for integer overflow in the
calculation nmemb * size."
The return value of sys_heap_realloc() is not compatible with that
of realloc().
Signed-off-by: Martin Åberg <martin.aberg@gaisler.com>
Macros like INT64_C(x) convert x to a constant integral expression,
i.e. one that can be used in preprocessor code. Implement wrappers
that use the GNUC intrinsics to perform the translation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The 'fputs' has flaw in the implementation. It almost always
returns 'EOF' even if completed successfully.
This happens because we compare 'fwrite' return value which is
"number of members successfully written" (which is 1 in current
implementation) to the total string size:
----------------------------->8-----------------------
int fputs(const char *_MLIBC_RESTRICT string,
FILE *_MLIBC_RESTRICT stream)
{
int len = strlen(string);
int ret;
ret = fwrite(string, len, 1, stream);
return len == ret ? 0 : EOF;
}
----------------------------->8-----------------------
In result 'fputs' return 'EOF' in case of string length bigger
than 1.
There are several fixes possible, and one of the fixes is to
swap number of items (1) with size (string length) when we
are calling 'fwrite'. The only difference will be that
'fwrite' will return actual numbers of bytes written which
can be compared with the string length.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Most of kernel files where declaring os module without providing
log level. Because of that default log level was used instead of
CONFIG_KERNEL_LOG_LEVEL.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support for abs with additional integer types.
This is needed to make LLVM quiet and stop warning about abs being used
with int64_t and such.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
So far data that went to stderr was simply dropped in case of minimal
libc. In case of newlib stderr was treated same like stdout
(e.g. fprintf(stderr, ...) was equivalent to fprintf(stdout, ...).
Extend filter on stream pointer to allow both stdout and stderr to pass
data to stdout hook (which is Zephyr console backend in most cases).
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
All in-tree uses have been replaced by cbprintf, and the API was
private so there should be no out-of-tree users.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The minimal libc provided by Zephyr can use the Zephyr system
implementation rather than have its own implementation.
When combined with CBPRINTF_NANO some sprintf tests must be
skipped as they assume a more capable libc. Add an overlay
that supports testing this non-default combination.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This reverts commit e812ee6c21.
This is the initial step towards replacing the core Zephyr formatting
infrastructure with a common functionally-complete solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
abort() is an important runtime function, oftentimes used to signal
abnormal execution conditions in generic applications. Worse, they
may be used under such circumstances in e.g. compiler support
libraries, in which case lack of implementation of this function
will lead to link error.
Fixes: #29541
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
shell_fprintf requires that formatted output be emitted with a
putchar()-like output function. Newlib does not provide such a
capability. Zephyr provides two solutions: z_prf() which is part of
minimal libc and handles floating point formatting, and z_vprintk()
which is core and does not support floating point.
Move z_prf() out of minimal libc into the core lib area, and use it
unconditionally in the shell.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The fs_open flags has been changed to accept open flags, which requires
changes to open(...) to support the new flags.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit changes signature of open function from:
int open(const char *name, int flags)
to
int open(const char *name, int flags, ...)
Currently existing two argument invocations should not require any
rework.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
