As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
Currently we only store the fragment offset. But in some cases it might
be necessary to also inspect the M-bit (More Fragment) of all received
fragments.
Modify the semantics of the field to store all the flags, rename the
setter to account for this change, and add a getter for the M-bit.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
This adds the ability to create Ethernet bridges for connecting
separate Ethernet segments together to appear as a single
Ethernet network.
This mimics the Linux functionality of the same name.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Flag that indicates if a given packet is being retransmitted has become
obsolete since more detailed flags were added. This commit removes the
flag and references to it altogether.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit extends the struct net_pkt structure to contain flags
related to IEEE 802.15.4 security processing. Added flags:
* ieee802154_frame_secured - indicates if a frame is authenticated and
encrypted according to the configuration stored in Auxiliary Security
Header
* ieee802154_mac_hdr_rdy - indicates if MAC header is ready to be
transmitted or if it requires further modifications
These flags can be used by the upper layer to correctly configure
retransmissions of frames.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Introduce a helper function for being able to remove any arbitrary
length from tail of packet. This is handy in cases when removing
unneeded data, like CRC once it was verified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
The ieee802154_frame_retry flag indicates that a transmission
retry is being performed. This flag may be used by the upper layer
to instruct the IEEE802.15.4 driver implementations to not perform
any modifications to the transmitted frame.
This flag should be used only in the event of a previously failed
transmission.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
The k_work handler cannot manipulate the used k_work. This means
that it is not easy to cleanup the net_pkt because it contains
k_work in it. Because of this, use k_fifo instead between
RX thread and network driver, and between application and TX
thread.
A echo-server/client run with IPv4 and UDP gave following
results:
Using k_work
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 21922 5543071 103 us [0->41->26->34=101 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (0) 0 0 -
[1] BE (0) 21925 6039151 97 us [0->21->16->37->20=94 us]
Using k_fifo
------------
TX traffic class statistics:
TC Priority Sent pkts bytes time
[0] BK (1) 15079 3811118 94 us [0->36->23->32=91 us]
[1] BE (0) 0 0 -
RX traffic class statistics:
TC Priority Recv pkts bytes time
[0] BK (1) 0 0 -
[1] BE (0) 15073 4150947 79 us [0->17->12->32->14=75 us]
So using k_fifo gives about 10% better performance with same workload.
Fixes#34690
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements the OpenThread APIs to pass MAC keys and
frame counter to the radio layer in order to process the
transmission security. This is needed for the correct functioning
of a CSL transmitter.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
The timestamp is no longer depending on TX/RX time config
options so move it to separate settings.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This value is used to measure the RX/TX statistics. The previous
use of the timestamp field did not work in RX path as the timestamp
value could be overwritten by the driver if gPTP timestamping
is enabled. So to fix the RX statistics, use a separate field
for the create time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add get/set helpers to store information whether the net_pkt
is captured already or not. This bit is used to detect capture
loop and avoid recursion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy TCP stack as it is replaced by the new TCP2 stack.
The TCP2 stack has been the default stack since 2.4 release.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This returns the available contingous space in the packet starting from
the current cursor position.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This commit fixes some edge cases when using net_bufs with reserved
bytes (headroom) as fragments of a net_pkt.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The function will check that the net_pkt will contain some
data and return true in that case, and false if the net_pkt
is empty.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The indentation went wrong when the integer types was changed
from the type "u8_t" to type "uint8_t". This changed the length
of the type and caused the code to look bad in places.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allow user to enable CONFIG_NET_PKT_TXTIME and
CONFIG_NET_PKT_TXTIME_STATS at the same time. This will increase
memory consumption but as the CONFIG_NET_PKT_TXTIME_STATS is
only meant to be enabled for debugging purposes this overhead
can be accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect information how long net_pkt has travelled in IP stack
in certain points. See network documentation what these points
are and how to get information about the timings. This initial
commit adds support to TX timing collection.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we have removed first net_buf, then we must not restore the
original cursor as that will point to wrong head net_buf.
Add also unit test to check that the packets are removed
properly.
Clarify the documentation that we are removing data from
beginning of the function, also document that the cursor
is reset after this call.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP flag was conflicting with PPP flag in the same union.
This prevented TCP from working properly with PPP.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
OpenThread expects information, whether Frame Pending Bit was set in the
ACK response sent by the radio driver. Carry this information in the
net_pkt structure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
TCP code needs to know whether the pkt is sent the first time
or is it a resent one. This information is used when deciding
if the pkt ref count needs to be increased or not. The packet
does not need to increase ref count when sent first time, as
the ref count is already 1 when the pkt is created. But for the
2nd time the packet is sent, we will need to increase the ref
count in order to avoid buffer leak.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
IPv4 header options length will be stored in ipv4_opts_len
in net_pkt structure. Now IPv4 header length will be in
net_pkt ip_hdr_len + ipv4_opts_len. So modified relevant
places of ip header length calculation for IPv4.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
application to the network device driver. The data is calculated
for all network packets and not just for UDP or TCP ones like in
RX statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Calculate how long on average net_pkt has spent on its way from
network device driver to the application. The data is only
calculated for UDP and TCP network packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit implements net_pkt_shallow_clone. A shallow clone clones
the net_pkt but not the buffers. The buffers are only referenced and
therefor only freed when both copies of the net_pkt are freed.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
This commit is an implementation of 6LoCAN, a 6Lo adaption layer for
Controller Area Networks. 6LoCAN is not yet standardised.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
The SO_TXTIME socket option can be used by the application to
tell the network device driver the exact moment when the
network packet should be sent.
This feature is also implemented in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The first word is used as a pointer, meaning it is 64 bits on 64-bit
systems. To reserve it, it has to be either a pointer, a long, or an
intptr_t. Not an int nor an u32_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
commit 79672d16 was missing the fact socket layer is putting net_pkt
into a k_fifo. However, it's on receiving side only: at this point the
k_fifo_put is using the k_work area which is then useless at this
point Thus why it did not break anything, as k_fifo only needs 4 bytes
while the k_work attribute takes 12 bytes.
Thus adding a union on the k_work attribute with another new attribute
that describes the behavior.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute was used when net_pkt where queued into a fifo. However,
since the cove to k_work queues (due to the introduction of TC), such
attribute has been totally useless.
Removing it gains 4 bytes in net_pkt structure.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Replace "Note:" to actual @details so it appears properly formated in
generated documentation.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Its behavior varies whether overwrite bit is set or not, so detailing
this more carefully.
Fixes#14093
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces net_pkt structure size.
Moving sent_list attribute for better alignment.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This attribute, in case CONFIG_NET_STATISTICS is enabled, made sense
when L2's send() function did not return the length of the sent packet.
But now, it's a superflous optimization as is it used only to set the
stats on recv or send, where net_pkt_get_len() can be used directly.
This helps to save 2 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Seems like a useless attribute. Since net_context is not being used by
the user directly (socket is the unique interface now) and since no core
parts uses the token parameter of net_context API: let's remove the
attribute.
This helps to save 4 bytes from struct net_pkt.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
