Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Name length can't be longer than 8 bytes. This needs to be clarified
in the bt_mesh_model_data_store() documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The existing extension tree does not support all the features that are
defined by the specification (e.g. multiple parents).
This patch approaches this problem by defining a circular single-linked
list of extension models. So for a given model, all models that are on
the same list as that model are in some extension relationship with that
model. All models on a list represent a single connected component of an
extension graph but without defining specific relationships between each
pair of models. This list is used to manage a shared subscription list
as per the Mesh Profile Specification:
```4.2.4 Subscription List
Within an element, each model has a separate instance of a Subscription
List, unless the model extends another model on that element. Instances
of models that extend other models (i.e., all models within an extension
relation tree) shall share a single instance of a Subscription List per
element.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The current approach with storing RPL by timeout doesn't solve all
issues as the node may loss power before the timer is fired.
In addition to that this may wear out flash quickly if short timeout is
used.
This change adds an API to store the pending RPL entry upon user
request. Additional Kconfig option allows to completely disable timer
so that the whole storing relies on the user.
The mesh stack still stays responsible for outdating RPL entries in case
of IV Index update as this happens implicitly for the user.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This aligns provisioner and provisionee APIs in terms of endianess
of public key provided by an application.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit allows an unprovisioned device to exchange its public key
using out-of-band techology (see MeshPRFv1.0.1, table 5.19 and section
5.4.2.3).
For in-band public key exchange, the mesh stack uses HCI commands to
generate public and private keys, and DH key. This, however, doesn't
work for OOB public key exchange since there is no command to generate
DH key with a private key provided by an application. Therefore, this
commit adds direct usage of TinyCrypto into the mesh stack for DH key
generation for OOB public key support.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Periodic publication would previously build and send the first
publication inside the bt_mesh_model_pub() function, before cancelling
and rescheduling the next publication. The timer handler would only
handle retransmissions, and would abandon the rest of the publication
event if one of the packets failed to send.
This design has three issues:
- If the initial timer cancel fails, the publication would interfer with
the periodic publication management, which might skip an event or
send too many packets.
- If any of the messages fail to publish, the full publication event
would be abandoned. This is not predictable or expected from the API.
- bt_mesh_model_pub() required 384 bytes of stack to build the message,
which has to be factored into all calling threads.
This patch moves all transmission into the publication timer by
replacing k_work_cancel with a single k_work_reschedule(K_NO_WAIT). It
also changes the error recovery behavior to attempt to finish the full
publication event even if some of the transmissions fail.
Split out from #33782.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Add include <bluetooth/mesh/msg.h> into <bluetooth/mesh/access.h> to get
definition of 'struct bt_mesh_msg_ctx'.
We see this when trying to build the mesh_badge sample for the
reel_board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds a parsing mechanism for Composition data page 0 in the Config
Client API, and uses it in the shell module to parse the incoming
composition data.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The first byte of the composition data status message is the returned
page index, not the status of the request. This is now reflected in the
API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds a Proxy callback structure with a callback for Node ID enable and
disable. This API follows the Friend and LPN API pattern in mesh/main.h,
and can be expanded with more callbacks later.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a "polled" function to the friend callback structure, that gets
called every time the friend receives a poll message. The polled
callback is called before the establish callback, to match the LPN
behavior.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to new work API. Avoid a racy cancel by allowing the work
handler to deal with an immediate off when the time remaining changes
to zero.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Fixed some undesired or incorrect macros, which
can cause build error.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Moves mesh feature configuration to a separate module, deprecating the
bt_mesh_cfg_srv structure. The initial values for the features should
now be enabled through KConfig, where new config entries have been added
for each feature.
This removes the upward dependency on the config server from the core
stack, and makes the config server a pure frontend for the configuration
states, as all spec mandated behavior around the feature states is now
encapsulated.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds public documentation for the Heartbeat feature in a separate page
under Bluetooth Mesh.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Encapsulates the Heartbeat state and functionality in a separate
heartbeat module, removing all manipulation of the heartbeat state from
the transport and config server modules.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Currently all provisioning procedure into common source
files call `prov.c`, that will not compile separately.
Add `BT_MESH_NODE` to control whether nodes are supported
and device provisioning is supported, this will be used in
provisioner role.
Add more provisioner OOB authentication method.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Add Queue Size and Receive Window information to lpn
callback function to notify upper layer to determine
currently friend node information, which may be used
in future.
Add Callback structure to notification application which friendship
has been changed.
Add function `bt_mesh_friend_terminate` let's app layer determine
terminate friendship manually.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
This is a major refactoring of the handling of the cryptographic
material of both the network and transport layers. The aim is to
encapsulate the key object manipulation, and improve overall modularity.
Pulls Applications and Subnets out of the bt_mesh and into separate
modules, with static storage types on the data. This has several
side-effects:
- The Config Server no longer operates directly on the bt_mesh.subs and
bt_mesh.apps lists, but goes through a public configuration interface,
following the pattern set in #27908.
- All iteration through the keys is done through iteration APIs
- Key resolution on RX and TX is centralized.
- Changes to the keys triggers events the other modules can register
handlers for.
- Friendship credentials are stored in the lpn and friend structures.
Part of #27842.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a high-level documentation page for the Bluetooth Mesh Shell
subsystem, documenting all available commands and their parameters.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Include the files that provide the types and macros used by the
header. Ensure that all declarations use C language linkage when
included from a file using C++.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C99 designated array initializers are not part of the C++ language,
and are not supported in GNU G++. Replace their use with invocations
of the Zephyr listify macro utility, with ancillary helper functions.
Also fix the initialization order to match declaration order (which
C++ also requires).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
C++ requires that designated initializers be provided in declaration
order. Fix the macros that violate this requirement.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Previous mode store function only can store single data,
change this to store as KV model, let's app-layer to manager
model data, other than by stack when node reset.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Adds propagation of error returns from the model init callbacks in
Access, and removing any other checks for successful init in the
foundation models.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
According Mesh Profile 1.0.1. A application key shall
binding single network key. And Device key shall bind all
network key, and dev key only known by cfg_cli and node self,
only used by cfg_cli & cfg_srv.
Fixes: #21088
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Until now the choice of reliable sending (segmented messages with
acks) was implicitly dependent on the size of the payload. Add a new
member to the bt_mesh_model_pub to force using segment acks even when
the payload would fit a single unsegmented message.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactor the handling of network nodes and their keys into a separate
Mesh Configuration Database (CDB). This, not only creates a separation
of the local node and the other nodes, but also makes it possible to
implement functions to manage the whole, or at least parts of the mesh
network.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Allow models to skip a periodic publish interval by returning an error
from the publish update callback.
Previously, an error return from publish update would cancel periodic
publishing. This can't be recovered from, and as such, no valid model
implementation could return an error from this callback, and there was
no way to skip a periodic publish.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Replaces the Mesh model settings_commit callback with a start callback,
indicating that the mesh model behavior is ready to start. Everything
that was previously done in the settings_commit callback may be moved to
this callback, which gets called just after mesh settings are committed,
instead of in the middle of the process.
This resolves an issue where models had no context in which to start
their behavior, as the previous settings_commit call fired before the
mesh was declared valid, making access APIs inaccessible.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
