Implemented host function for configuring vendor specific data path for
use with ISO, and fixed passing of path ID in setup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
These constants are based on (i.e. exactly as) the
recommended values for regular (i.e. non-periodic)
advertising.
The GAP spec does not actually specifiy these numbers (or any
numbers for periodic advertising), but they are sane
numbers to use for periodic advertisement.
The issue with using the non-periodic advertising
whereas the peridic advertising unit is 1.25ms.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Document the behavior of the include name option when this is changed by
updating the advertising parameters of the advertising set.
In this case we cannot update the advertising data since the host does
not have a copy to modify. The application will have to do update with
its current advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Similar to Sphinx, @kconfig{} alias should be used in Doxygen docstring
in order to reference a Kconfig option. @option{} is still kept for
compatibility reasons.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Document that calling settings_load is required when the application is
not creating and managing the identities of the stack itself.
The application will not be able to use all features of the stack before
the identities have been loaded.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The HCI specification creates additional complexity to allow this
configuration:
- When a connection gets established, we need to know which
identity the HCI_LE_Connection_Complete event corresponds to.
- The identity is a property of the advertising set.
Therefore we need the advertising handle.
- The advertising handle is part of the
HCI_LE_Advertising_Set_Terminated event and is not part of
the HCI_LE_Connection_Complete event. Therefore
the information of both events needs to be combined.
By spec the LE_Connection_Complete comes first. Therefore we cache
this event until the identity is available.
The event is only cached when a connection gets established as
that is the only case where we need to resolve the identity.
As the caching requires more resources, it is only enabled if the
application requires multiple advertising sets and multiple
identities.
The host maps the HCI_LE_Advertising_Set_Terminated event with
the HCI_LE_Connection_Complete event by comparing the connection
handles.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add new callback to periodic advertising sync callback.
The callback may be used to receive notification about CTE
reports in connectionless mode (periodic advetising sync).
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add the BT_GAP_PER_ADV_MIN_INTERVAL and BT_GAP_PER_ADV_MAX_INTERVAL
macros in gap.h that are also reference in bluetooth.h and
used for parameter validation in adv.c.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds a new flag, BT_LE_ADV_OPT_FORCE_NAME_IN_AD, which can be used
to force the Bluetooth GAP device name to appear in the advertising
data rather than the scan response data of an advert with scan response
data.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Adds two functions:
1) Lookup periodic adv sync object by address
2) Get information about a periodic adv sync object.
These can be useful for the application verify if there is already an
existing sync to an periodic advertiser.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added initial support for BIS (broadcast ISO stream), which
adds support for creating BISes as both broadcaster and receiver,
as well as managing and creating BIGs.
Extends PA sync to handle BIGInfo adveritising reports.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Allow NULL pointer to be passed to bt_id_get function so
that only count can be fetched.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Don't auto-update the device name in the advertising data as that
would clear any other scan-response data set by the application.
Document the behavior of the advertise with device name option
and the need to update data by the application to make sure
advertising data does not get cleared.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Prevent the bt_rand function from being called before bt_enable.
Depending on the implementation of bt_rand this function cannot
be called before bluetooth has been initialized. With host supplied
crypto functions the HCI LE rand command is used for example.
The use case for calling bt_id_create before bt_enable is meant for
when the application has storage for the identity instead of the stack.
So we add the requirement that the application has to have storage
for the identity resolving key (IRK) in addition when the local
device is privacy-enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecate the bt_set_id_addr API function. This is merely a wrapper
for the bt_id_create function now, except an IRK cannot be given.
When CONFIG_BT_PRIVACY is enabled an IRK has to be given by the
application because the bt_rand function cannot be called before
bt_enable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the deprecated scan filter duplicate enum values and parameter.
This was deprecated for the 2.3.0 release.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update description to maximum and minimum values of interval_min and
interval_max fields of bt_le_adv_param struct according to
Bluetooth Core Specification 5.2
Signed-off-by: Alexey Tsvetkov <xeenych@gmail.com>
This is a pairing function with bt_le_scan_cb_register()
to used for remove the scanner callback from callback list.
Signed-off-by: chao an <anchao@xiaomi.com>
Add helper defines for Extended Advertising parameters that
can be used while creating Extended Advertising sets.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds support for using the periodic advertiser list.
This list allows the application to rely on specific
devices when creating periodic advertising syncs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for the periodic advertising sync transfer
(PAST) feature, which allows a synced device, or an
advertiser, to transfer synchronization of a periodic
advertising train to a connected device.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the advertising option that controls if the directed advertiser
will use an RPA or the identity address of the peer for the initiator
address.
This option currently has two issues:
- It behaves differently if the privacy feature has been enabled,
which can be confusing for application to use.
- It cannot start a directed advertiser towards a peer that is not
privacy-enabled and has distributed an IRK.
This commit includes the following changes:
- When privacy has been enabled in order to advertise towards a
privacy-enabled peer the BT_LE_ADV_OPT_DIR_ADDR_RPA option must now
be set (same as when privacy has been disabled).
- It is now possible to start a directed advertiser using the identity
address of the peer when privacy-enabled.
- When privacy has been enabled the advertising option combination
of using the local identity address and an RPA as the initiator
address is now disallowed and will return an error code.
This is done because this combination did not actually work and would
have used the identity address of the peer instead.
- If the controller does not support controller-based privacy then
using the option BT_LE_ADV_OPT_DIR_ADDR_RPA will return ENOTSUP
because this behavior cannot be done with host-based privacy.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The sync established event caused by a cancel by the host
was not properly handled. When cancelling the sync established
event is created, and the sync object should not be deleted
before that event is received.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Document and validate advertising parameters for the disallowed
advertising mode high duty cycle directed connectable advertising
using extended advertising PDUs.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Adds support for enabling/disabling PA sync receive,
which allows applications to control when to receive data
while a sync is established.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Document the distinction between the existing non-connectable
advertising configurations, and add one that uses identity which will
be the same for all beacons.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Changes the callbacks for periodic sync callbacks such that multiple
applications can register callbacks, similar to the connection and
scan callbacks.
This change will make it easier to support the PAST feature, as
PA syncs make be created by the controller which then notifies
the host, and thus the application (if callback registered).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bluetooth.h header file uses a different tabulation style in the
documentation headers, which for recent Doxygen versions generates
verbatim blocks. This disables usage of the @option ALIAS because
verbatim blocks cannot be nested. With this commit the documentation's
tabulation is fixed and `@option` is used to resolve Kconfig options.
Signed-off-by: Fabio Utzig <fabio.utzig@nordicsemi.no>
Added support for syncing to periodic advetisements.
The API and usage is heavily inspired by the extended advertisement
and connection APIs.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added the ext adv report interval to bt_le_scan_recv_info which
denotes whether or not there is periodic advertisement data
associated with the advertisement report.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Added API to set periodic adv parameters, periodic adv data
and to enable/disable periodic advertisement.
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
Document the behavior of bt_le_ext_adv_set_data ignoring either
advertising or scan response data when the configuration does
not support this type of data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Only persist advertising when the bt_le_adv_start API is used to start
the advertiser. For multiple advertising set a connectable advertiser
can only be started if there is a connection object available for the
advertiser. Leave the decision on which advertising set should be
advertising up to the application instead of suspending advertising
when no connection object is available.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove the BT_LE_CONN_OPT_2M option and update documentation.
This was a misunderstand about the init PHY HCI parameter.
The init PHY in the extended connection create command does not
determine which PHYs are accepted as the initial PHY of the
connection. This is instead determined by the secondary PHY of the
extended advertiser.
The init PHY parameter only specifies which conn parameters are
provided, and since we only provide one conn parameter this option
has no effect.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Attempt to fix C++ error: taking address of temporary array.
According to GCC documentation:
In C++, a compound literal designates a temporary object that only
lives until the end of its full-expression.
Finishing with this recommendation:
As an optimization, G++ sometimes gives array compound literals
longer lifetimes: when the array either appears outside a function
or has a const-qualified type.
But it is probably safest just to avoid the use of array compound
literals in C++ code.
Fix the issue by introducing INIT macros as an alternative, and use
these in the inline functions to avoid the use of array compound
literals in Bluetooth headers.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix detailed API description rendered into text boxes.
API documentation with more that one paragraph must use the @brief tag
to be rendered correctly.
Fix indentation level of '*' in doxygen documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for multiple advertising set. Move the advertising state
flags to be per advertising set and loop over advertising sets instead
of looking up legacy advertiser set or handle 0.
Since it is not certain that the advertising set terminated event can
arrive directly after the connection complete event there is currently
a limitation that there can only be one local identity used by
connectable advertisers at a time. This guarantees that we know
the local identity being used in the connection complete event.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This patch introduces two major changes to the directed advertising
feature of the bluetooth host.
Deprecating the bt_conn_create_slave_le, and removing
bt_conn_le_create_slave which has never been released. This behaviour
has now been moved by to providing the peer direct address into the
advertising parameters.
Introducing directed advertising support for nonconnectable
directed extended advertising, both scannable and non-scannable.
A bug was also fixed in the the directed-adv command in the shell
when the argument "low" was given. The advertiseng parameter pointer
declared with BT_LE_ADV_CONN_DIR_LOW_DUTY was declared in a scope that
was no longer valid when it was used to start the advertiser.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix filter_dup and options in union with mixed size integral types,
this is not portable, and causes malfunction on big-endian systems.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add scanner API for extended scanner. This includes the options to scan
on the LE Coded PHY for long range, configuring scan timeout with scan
timeout callback and additional information received from the extended
advertising report.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Rename filter_dup parameters used for scanning filter options to the
more generic name options, and make scan filter options follow same
naming patters as advertising and initiator scan options.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
