MEC172x eSPI driver, eSPI pin programming, interrupt updates related
to eSPI and other updates for MEC172x eSPI driver.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
The repository to the DAPlink firmware for the reel board has been moved
to the Github organization PHYTEC-Messtechnik-GmbH. This commit replaces
the link in the Zephyr reel board documentation accordingly.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
This commit enables the DAC 1 instance on the target board
b_u585i_iot02a from STMicroelectronics.
DAC1 output 1 is available on PA4.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
add adc to board dts file,
update yaml files and documentation,
add adc 1 channel pins 1 and 15 to the pinmux file,
add overlay file to the board adc sample,
add board to the adc test file and
Signed-off-by: Andrei Auchynnikau <ovchinnikov@strim-tech.com>
Use a link to the standard pyOCD Debug Host Tools documentation section
instead of outdated links to non-existent GitHub repos.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add zephyr_udc0 (USB device controller) nodelabel to
STM32 boards with usbotg_fs node to allow generic USB device
samples to be build.
Follow up on commit e4f894788a
("boards: add zephyr_udc0 nodelabel to all boards with USB support")
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a Kconfig option, similar to the one that is already available
for nRF5340, that allows enabling the REG0 (VDDH) DC/DC converter
in nRF52840. Make use of this option in Nordic boards: nRF52840 DK
and nRF52840 Dongle.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Uses the stats subsys to provide simple but useful debugging stats for
power management state changes and timing.
Removes the no longer needed PM_DEBUG config option
Replaces the use of PM_DEBUG for a test clock output pin for mec1501 and
adds in its place an SoC Kconfig option to enable it.
Adds a STATS_SET macro for assigning a value to a stat group field
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
MCUXpresso SDK sets the drive strength of LPUART and LPI2C pins to 4 for
this SOC, versus 6 for most other RT10xx boards. Update the pinmux.c
file for mimxrt1010_evk to reflect this.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds SPI support on LPSPI1 to the RT1010. LPSPI1 is available on pins
6, 8, 10, and 12 of J57 on the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit enables the LPSPI1 peripheral on the RT1015 EVK. LPSPI pins
are not populated by default, but headers can be added to J19 on the EVK
to access these signals
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for LPSPI to mimxrt1024_evk. LPSPI1 is exposed on pins
6,8,10, and 12 of J19 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing,
and requires that the board have solder jumpers R278, R279, R280,
and R281 bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SPI support is available on LPSPI1 and LPSPI3. Both of these require
board modifications to expose headers. LPSPI1 is used for testing, and
requires that the board have solder jumpers R278, R279, R280, and R281
bridged.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
RT1050 has multiple LPSPI peripherals. The simplest to access is LPSPI1,
which can be connected by bridging solder jumpers on the board. Enable
this SPI peripheral, and set it as default for SPI tests.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
PA11 can be remapped to PA9 by using the recently introduced
remap-pa11-as-pa9 property.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Enable i2c1 and i2c2 nodes on b_u585i_iot02a.
i2c1 is used as Arduino I2C
i2c2 is used as bus for HTS221 MEMS device.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This changes is an adaptation for the different boards
based on the SOC_STM32F412ZG that has been redifined
to SOC_STM32F412ZX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The mimxrt10xx evaluation boards that support the NXP USDHC IP
communicate unreliably with SD cards at 1.8V using the USDHC driver.
This commit temporarily disables 1.8V communication for all rt10xx
boards that currently support the USDHC driver.
Fixes#32289
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Instructions to use openocd on stm32u5 based platforms were missing
an instruction on the branch to use.
Also, the console excerpt were not rendering correctly, so fix
them.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
For some reason, LSE can't be used as LPTIM clock source
on nucleo_l073rz.
As a consequence, low power operations are not functional on
this platform.
Waiting for the original issue to be fixed, set LSI as LPTIM
clock source.
Partially fixes#38930
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Includes support for USB, CAN, ADC, DAC, and Arduino GPIO Map.
Future could support: ETM Trace (if Zephyr supports it), QSPI, FMC, DCMI
Initially based on closest BSP for the same SoC: nucleo_f446re
Extra peripherals added based on closest BSP for nucleo-144 board:
nucleo_f429zi
Checked against nucleo-144 schematic
Documentation updated as best as I could
Arduino compatible pinmux for SPI, UART and I2C via Zio header
Tested:
USB Device mode (samples/subsys/usb/console)
Console via ST-link usart3 (samples/hello_world)
user LEDs (samples/basic/blinky)
scripts/twister --device-tests -p nucleo_f446ze
Not tested but should work: SPI, I2C, CAN, ADC, DAC
Not working yet: Quad-SPI (missing in dts/arm/st/f4/stm32f4.dtsi)
Signed-off-by: Tom Owen <tom.owen@zepler.net>
Adds flash partitions and chosen nodes to the mimxrt1020_evk device tree
to support mcuboot on the internal QSPI flash.
Also enables FlexSPI flash driver XIP mode support on this board to
support mcuboot.
Signed-off-by: Xabier Marquiegui <xmarquiegui@ainguraiiot.com>
This adds the uart4 device to the stm32f3_disco board
based on the stm32f303 device from STMicroelectronics
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The gyro i3g4250d is added to the device tree of stm32f3_disco rev. E
and a yaml file for this revision to use in twister is added.
Signed-off-by: Jonathan Hahn <Jonathan.Hahn@t-online.de>
Fixes: #38403
Removing unneeded `CONFIG_CONSOLES=y` occurrences where no console
driver is selected.
Such selection results in an empty drivers__console zephyr library,
which again results in the following warning message.
> No SOURCES given to Zephyr library: drivers__console
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Since version 1.11.0, Full stack M0 binary requires 216K of flash
being available, while previously 212K were required.
Review flash partitioning to take it into account.
Additionally:
- update value in board yaml file.
- align value in package .dtsi file
Fixes#38735
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The NPCX I2C implementation contains two modules, an I2C port and an
I2C controller. Disable the I2C controller nodes by default and require
the user to enable both the I2C port and controller in the devicetree.
Signed-off-by: Keith Short <keithshort@google.com>
Update the documentation for the Renesas H3ULCB board.
It document features that have been merged
during v2.7 windows and before.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
