On connection clean-up release nodes held by LLCP. These are released
in two steps, first on LLCP terminate (in local/remote) by moving
to rx/tx_node_release chains, and then on conn_cleanup_finalize
nodes are released back to appropriate mem-pool/queue.
Rename abort functions to refer to terminate.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of using the node ref used for TX ack for storing a TX node
pre-allocated in case of NTF RX node availability delay, introduce a
separate store to TX node. This to avoid misunderstanding on clean-up
in terminate flow.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Latest modification to LLCP removed 'monitoring' of cis->established
flag in LLCP, relying instead on signal through ULL.
For this to work properly the signal must also be generated, so this is
introduced. Note - checking of cis->established flag could be removed
if caller ensures only calling once (on establish condition)
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
BT Core Spec states that feature exchange should be initiated if
not already performed. So in this case initiate feature exchange
and 'abort' enqueued CIS create if peer doesn't support CIS peripheral
feature
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix peripheral CIS receive window to consider that the
peripheral ACL could drift at the instant the CIS is being
established.
Hence add additional EVENT_TICKER_RES_MARGIN_US as receive
window length.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix use of uninitialized ticks_slot value in calculation of
cis_offset_min when creating CIS. Calculate the ticks_slot
value earlier when committing the CIG parameters.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Do not enqueue node rx buffers for generating invalid ISO
data from Tx ISR while supplying the node rx buffer to
Radio. This causes node rx pool corruption and also MIC
failures in the central ISO LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix peripheral ISO data ack mechanism to correctly update
the SN when PDUs fail to be received.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When there is an active CIG for a new CIS create, then use
strict cis_offset_min/cis_offset_max so that the new CIS
is scheduled inside the active CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Bitsets across byte boundaries does not work properly for big-endian;
Converted to use two uint8's instead
Signed-off-by: Troels Nilsson <trnn@demant.com>
Updated nRF5 Series LLL implementation to support multiple
peripheral CIS establishment from peer central devices.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Central multiple CIS create implementation using advanced
scheduling to find the active CIG events and calculate the
CIS offset to be used in the LL_CIS_REQ PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use accumulated connected ISO LLL prepare callback latencies
to check supervision timeout.
Also use the accumulated connected ISO LLL prepare callback
latencies to adjust SN and NESN values.
Connection establishment can cause short prepare callbacks
inserted before Connected ISO group prepare callbacks, that
cause the Connected ISO group prepare callbacks being
cancelled while being in prepare pipeline. Hence, it is
necessary to accumulate prepare callback latencies wherein
ticker callbacks are executed but prepare callbacks are
cancelled in the prepare pipeline.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of preliminary Central with multiple CIS
create support in Lower Link Layer. Uses a simple CIS
offset calculation that works when ACL are created with
connection interval that is multiple of CIG ISO interval.
Each ACLs are offset using BT_CTLR_CENTRAL_SPACING hence
having the same CIG sync delay values for all the ACLs.
Advanced Scheduling to setup CIS in any order of ACL and
CIS combination, ACL placed anywhere in timeline and CIS
creation will come therein will be implemented in later
Pull Requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Include ticker expire remainder value when calculating the
cis_offset to acheive fine timing in scheduling the CIG
radio events relative to its associated ACL radio events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the ticker_start_us() interface for Central and Central
ISO setup to acheive fine timing for the first expire
timeout.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To acheive microsecond or fine timing for first expire
timeout, pass remainder value of the coarse tick to a new
ticker_start_us() interface. The new interface is available
with BT_TICKER_EXT feature enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation of CIS Null PDU Indicator use to meet the
BT Specification statement, that, if the source of the data
fails to provide a payload in time for a CIS subevent, then
the link layer shall transmit a CIS Null PDU instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is re-introduction of Extended, Periodic Advertising
and Broadcast ISO using ticker expire info feature to get
the aux, sync and BIG offsets.
Relates to commit 714d74b77b ("Bluetooth: controller: Use
new ticker feature to get offsets").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ticker remainder and lazy get depends on match get interface
provided by BT_TICKER_NEXT_SLOT_GET_MATCH.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove redundant range and default for BT_CTLR_ADV_AUX_SET
when supporting BT_CTLR_ADV_PERIODIC.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
BT_TICKER_EXT is not supported with BT_TICKER_LOW_LAT.
Remove redundant select of BT_TICKER_EXT for
BT_CTLR_ADV_EXT.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Start/pause encryption should not be initiated on ACL with CIS
established (BT Core Spec 5.4, Vol 6, Part B, Sect. 5.1.3)
Adding test for the added procedure peek function
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adds a Kconfig symbol which contains the default controller TX power
directly in dBm. This allows code to directly display/use the configured
power, instead of having to manually iterate over all the
`BT_CTLR_TX_PWR` options.
```
LOG_INF("BT controller configured for %ddBm TX power",
CONFIG_BT_CTLR_TX_PWR_DBM);
```
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Prevent referencing inactive CISes by clearing state variables
after teardown. This was seen as necessary when having CISes on
different ACLs, and disconnecting ACLs in random order.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adds API for Periodic Advertising with Responses - Scanner:
- Synchronize to a PAwR train
- Choose which subevents to synchronize to
- Receive advertising reports from subevents
- Send responses
The support is enabled by CONFIG_BT_PER_ADV_SYNC_RSP, and requires
a controller that selects CONFIG_BT_CTLR_SYNC_PERIODIC_RSP_SUPPORT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Adds API for Periodic Advertising with Responses - Advertiser:
- Configure parameters
- Receive subevent data requests
- Set subevent data
- Receive response reports
The support is enabled by CONFIG_BT_PER_ADV_RSP, and requires
a controller that selects CONFIG_BT_CTLR_ADV_PERIODIC_RSP_SUPPORT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Use the minimum supported cis_offset_min considering that
ACL radio event does not overlap with CIG event. Use the
calculated maximum of local and remote cis_offset_min in the
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Advertising PDU size calculation when direction finding
feature is enabled and PDU fragment count includes the
maximum CTE PDU chained. Fix removes redundant PDU count
included for Extended Advertising. Only Periodic advertising
PDUs chain CTE requires number of additional PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A case of an invalid PDU was seen leading to a hit on this ASSERT, ie
this COULD happen. Refactoring of the state handling re. expectedness
in remote vs local request machines combined with ensuring the local
request machine ceases to expect PDUs when remote procedure 'takes over'
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix regression in refactored LLCP using uint16_t instead of
uint32_t in storing the win_offset_us value. This caused
connection update to fail with incorrect window offset being
used to schedule the connection radio events.
Regression since commit e1c2c36f56 ("Bluetooth: controller:
llcp: set refactored as default").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix window offset calculation which is missing the radio
rx ready delay timing be subtracted because the connection
offset from the start of the radio for scan window to the
end of the ADV_IND PDU includes the radio rx ready delay
timing, where as the determined window offset by advanced
scheduling calculates the offset from the ticks_at_expire
of the scan window to an active central connection's
ticks_at_expire.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update Advanced Scheduling implementation to use remainder
value in precisely calculating the connection request window
offset in microseconds.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the use of rx chain delay value used to calculate the
window offset into lll_scan_prepare_connect_req() instead of
current two places, one for legacy and other for extended
connection setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
