sensor_value_from_double had a early overflow when converting the
fractional part (val2). This occured when input was more then
2147.493647 (inp >= INT32_MAX/1000000.0 + 0.01).
return value -ERANGE as this is what errno is set to by `strtod` and
similar posix functions.
fixes issue #39176
Signed-off-by: Simon Frank <simon.frank@lohmega.com>
The sample enabled the Grove LCD by default in prj.conf, and in the
README it is clearly stated that the sample is intended to work using
the LCD module. This patch remove the unnecessary ifdeffery and obtains
a reference to the display at compile time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The driver does not implement a display API, it has a custom API. Having
it under display is confusing, since display API consumers may expect
they can use it. These sort of custom drivers fit better under
drivers/misc.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This PR adds the different handling of temperature sensor for the
STM32L5 soc. In this soc, there are some calibration settings which
need to be applied for temperature conversion.
Signed-off-by: Wouter Cappelle <wouter.cappelle@crodeon.com>
This sample writes the tmp108 temperature to the console
once every 3 seconds. There are macro definitions included
for turning off and on alerts if that is set up, and
also using low power one shot mode.
Signed-off-by: Jimmy Johnson <catch22@fastmail.net>
Add read access to internal tmp116 eeprom which
contains the device unique id after manufacturing
Signed-off-by: Guillaume Lager <g.lager@innoseis.com>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Convert remaining tests and samples to using find_package() instead of
literally including the CMake boilerplate code.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit adds const modifier in second argument for
sensor trigger handler.
There is no reason to modify this data and this change
would allow to store trigger configuration also in FLASH.
Fixes: #38929
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Adds a config flag to enable floating point support for fxos8700
compatible accelerometer devices.
Signed-off-by: Jordan Stein <jordan.stein@fortrobotics.com>
Both ARG_UNUSED in pm_info(), cause errors when using PM_DEVICE=y.
Added a default case in pm_info(), to fix warnings.
Signed-off-by: Igor Knippenberg <igor.knippenberg@gmail.com>
Add configuration for the mimxrt1024_evk board. This board does not have
any of the FXOS8700 interrupt pins connected by default, so triggers are
not available.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This adds an example application for the TI INA219 Zero-Drift,
Bidirectional Current/Power Monitor with I2C Interface
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When there is no grove sensor driver enabled, cmake warns
that the library has no sources. Fix that by adding
a new kconfig to be used by CMake to selectively
include the grove directory.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename:
- grove,light to seeed,grove-light
- grove,temperature to seeed,grove-temperature
The "grove" brand applies to a family of products by Seeed (sic):
https://www.seeedstudio.com/category/Grove-c-1003.html
Therefore we should use the existing vendor seeed.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It should be "maxim,max30101", because the vendor prefix for this
company is "maxim", not "max".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The difference between low power and suspend states is a thin blur line
that is is not clear and most drivers have used indistinctly. This patch
converges to the usage of the suspend state for low power, since
contrary to the low power state, it is used by both system and runtime
device PM. The low power state is still kept, but its future is unclear
and needs some discussion.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds an example application for Sensirions SGP40 gas sensor
and SHT4X T/RH sensor.
The measured T/RH are used to make use of the on-chip T/RH compensation
of the SGP40.
Signed-off-by: Leonard Pollak <leonardp@tr-host.de>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For some reason a few drivers were not converted to the new device PM
callback signature. The reason may be because the device PM part is
compiled only when CONFIG_PM_DEVICE=y, a condition not enabled in CI by
default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change the drivers's compatible from atmel,sam-tc to atmel,sam-tc-qdec.
The atmel,sam-tc should be reserved for the future counter driver.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Rename the NXP LPCXpresso55S16 board definition from
lpcxpresso55s16_ns (non-secure) to lpcxpresso55s16 and remove TF-M
configuration options.
While the LPC55S16 does have Arm TrustZone support, there is no TF-M
support available upstream yet.
Fixes#35100
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Converts the bmg160 sample application to check the sensor device at
build time instead of runtime. This fixes a Coverity issue for logically
dead code introduced in commit 5832e588e3.
Fixes#35118
Coverity-CID: 235919
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Converts the adxl372 sample application to check the sensor device at
build time instead of runtime. This fixes a Coverity issue for logically
dead code introduced in commit 72795c3e6c.
Fixes#35119
Coverity-CID: 235932
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
If we don't get a dev pointer from device_get_binding() we should
not dereference it. Just drop the name from the printk message
as in the future this is likely to use DEVICE_DT_GET().
Fixes#35112
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Looks like I forgot to finish a sentence. There's nothing really
special besides the top level requirement for an enabled node which is
mentioned at the top of the page. Add a reference to the bindings
index while we're here to make it clearer what such nodes contain.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a real README, convert the device getter to DEVICE_DT_GET_ANY,
and enable assertions to make debugging easier on new users.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
