PR #63973 namespaced generated headers with zephyr/, including generated
syscall headers.
Since then, some new generated syscall header includes have been added
without the zephyr/ prefix, breaking builds when
CONFIG_LEGACY_GENERATED_INCLUDE_PATH is disabled.
This commit adds the zephyr/ prefix to includes for generated syscall
headers where it has been missed.
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
Before this, stack protection would be effective only after switching to
the first thread.
Even before the first thread is created, the kernel init code uses the
IRQ stack to set things up. Let's make sure this is safeguarded as well.
This also fixes the incompatibility between CONFIG_RISCV_PMP and
CONFIG_RISCV_ALWAYS_SWITCH_THROUGH_ECALL, the later needing an exception
call to switch to the first thread and exception code assuming stack
guard is already set up in the PMP.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit unifies the `renesas,r7fa4m1ab3cfm` compatible string used in
various platforms by making it lowercase for the `arduino_uno_r4` target.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
SARADC was kept enabled to feed RNG entropy peripheral,
adding instability to Wi-Fi connection. So we disable it
before app runs as RNG driver already got initial entropy values.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
ESP32-S2 Wi-Fi clock is not initialized properly, causing
instability when scanning or connecting to a SSID.
Fixes#74899Fixes#74417
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
In case of minimal libc we have CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE = 0
by default. Some toolchains uses minimal libc by default (for example
ARC MWDT toolchain). Let's set CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE
explicitly so we can allocate memory for environment variables.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
In case of minimal libc we have CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE = 0
by default. Let's set CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE explicitly
so we can allocate memory for environment variables.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
It was pointed out in a future PR that they should have
a corresponding experimental Kconfig entry.
See PR #73795.
This updates the APIs added in PR #73826 and PR #74295.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
In case no "Connection: close" header is present in the request, the
server should keep the connection open for the client. Hence, after
serving a request, we need to check if the header was present (the
parser sets a flag for it), and only close the connection immediately,
if the client requested it. In case the client remains silent, the
connection will be closed anyway after the inactivity timer kicks in.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Allocating FD before pulling the new connection from the fifo can lead
to busy looping in certain cases. If the application keeps calling
accept() on a listening socket after failing to allocate new FD for the
incoming connection, it'll start busy looping, as will report POLLIN in
such case (as the new connection is still on the queue), but it'll
consistently fail with ENFILE.
This can be avoided by trying to allocate new file descriptor only after
new connection has been pulled from the fifo. That way, if we fail to
allocate the file descriptor, the incoming connection will be dropped,
which seems correct given we don't have enough resources to service it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case there were active connections when restarting the server, it
can't be re-initialized immediately, as binding to the server port will
fail. We need to wait for the TCP connection teardown, as even with
REUSEADDR socket option set, binding will fail if the sockets are not in
TCP TIMED_WAIT state (i. e. connections are active).
Because of this, add a configurable delay when restarting the server.
Additionally, make server initialization failures non-fatal, i. e. try
to restart the server again after the delay if the initialization fails.
It's been observed with Chromium, that it tends to keep connections open
even after closing them on the server side (socket lingers in FIN_WAIT_2
state), so the server re-initialization may fail even with delay, so
it's beneficial in such case to keep retrying the server
re-initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case of fatal errors (during poll() or when handling listening
socket), the server operation is restarted. It was missed however, that
sockets opened for the server should be closed in such case.
Additionally, in case there were active client connections, it's needed
to cleanup related resources, otherwise running timers may trigger a
crash.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work for all
toolchain.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
MWDT toolchain adds additional suffix to sections name in case of
ffunction-sections / fdata-sections are enabled.
Let's pick a single set of rules and syntax that work for all
toolchain.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Since f3e5d9db3dca2421bd5b4015fbc270d3972376bd, one needs to define
`LL_EXTENSION_BUILD` to enable exporting symbols from extensions. That
patch added that for `add_llext_target`, but missed it for the EDK, thus
breaking it. This patch fixes that.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
In previous batch of fixes it was overlooked that streams are
HTTP2-specific concept. While for HTTP2 we need to track headers reply
state for each individual stream, at HTTP1 level we need to track this
at the client level. Hence, reintroduce respective flags to track
headers reply state, but only for HTTP1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
find_package() already deals with finding ZEPHYR_BASE, so do not rely on
it being set in ENV, use the variable directly adter find_package() was
called.
Fixes#75387
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch improves the documentation for the llext subsystem, adding
information onhow to configure the llext subsystem, how to build
extensions using the Zephyr build system, and how to load and use these
in a Zephyr application.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The existing index.rst file contains a mix of information about the
llext subsystem and the LLEXT Extension Development Kit (EDK). This
commit splits the existing text into two separate files, index.rst and
build.rst, as a first step on improving the documentation.
No change in text is done in this commit.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Review and improve comments in source code to better describe the API
and the functionality provided by the llext library.
No actual code changes are performed in this commit.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
After configuration, the stream instance is valid and stream's
local_ep valid. bt_a2dp_stream_establish's parameter is stream
too. So in bt_a2dp_stream_establish, stream->local_ep should be
used to tell lower level (AVDTP) the sep.
set_config_param is used by copy-paste mistake.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
These properties are not used by the driver at all, but are
inconveniently marked as required. Lets just remove them.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Profile names MBT and DFU are updated as MBTM and DFUM respectively,
according to TCRL 2024-1.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Even just making minor edits to fcb, warnings are triggered
from Coding Guidelines of the form
Violation to rule 5.7 (Tag name should be unique) tag: fcb
Rename pointer variable names to fcbp.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
If the callbacks are not set, then we cannot do the requested actions
from the broadcast assistant. Since this is a significant issue,
that may prevent the role from working as intended,
LOG_WRN is used other LOG_DBG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The scan_delegator_security_changed function had a few issues
that were addressed:
1) It used an internal field to check level rather than the
value provided by the API
2) It did not treat bt_addr_le_is_bonded as a boolean return value
3) It did not properly truncate the recv state (fixed by using the
proper function bass_notify_receive_state)
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add few missing button codes, these matches the ones used in Linux to
cover HID mouse buttons 1 to 8.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Seemingly newer versions of gcc wrongly detect a variable is used
when it is not set, this is not the case the compiler is wrong,
add a default set to null to prevent the fake warning appearing
as an error in CI
Signed-off-by: Jamie McCrae <spam@helper3000.net>
Fixes an issue with using SMP on devices that do not support
unaligned memory access e.g. Cortex M0 which would result in a
hard fault
Signed-off-by: Jamie McCrae <spam@helper3000.net>
The 14/12-bit variants (AD5692R/AD5691R) require the data to be in the
upper bits of the two byte data field of the write command. See table 12
and the associated footnotes in the AD5693R/AD5692R/AD5691R/AD5693
datasheet.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Fixes the Kconfig for dynamic service registration to make it depend
on dynamic database support instead of selecting it, which prevents
issues whereby it is not actually selected
Signed-off-by: Jamie McCrae <spam@helper3000.net>
DTS binding area was capturing everything under dts/bindings instead of
leaving those to the areas affected.
Remove general wildcard and add some of the missing file filteres in the
relevant areas.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Address the cases where submitter is also the maintainer of the code
changed and other areas are being changed. In this case, assign to the
next area maintainers instead of assigning to submitter.
Example: maintainer of component A introduced significant changes to
area A but also makes changes to other areas B and C. Right now
maintainers of B and C are added as reviewers.
This change will assign to the next area after A, i.e. B in cases where the
submitter is also the maintainer of area A.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix a build error when CONFIG_SPI_ASYNC is set.
The issue was detected by CI
```
spi_xlnx_axi_quadspi.c: In function 'xlnx_quadspi_isr':
spi_xlnx_axi_quadspi.c:489:21: error: 'ctx' undeclared
489 | if (ctx->asynchronous) {
| ^~~
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix the busy wait in the MDIO driver that was causing timing
problems in systems with real time requirements performing tasks
more frequently than about a millisecond.
Restructure the code to be less redundant and change the busy wait
kconfig to microseconds instead of millliseconds. Also actually signal
to the mdio driver that it can use the interrupt instead of busy
waiting, this seems to have been forgotten.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Instead of including the boilerplate text and showing it in the created
issue, use comments that are still displayed when editing, but not shown
in the final issue, avoiding confusing and mixup between actual issue
and template text.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added a few missing CONFIG_ prefixes to Kconfig option references,
reshuffled the CAN release notes a bit to account for the
can_get_min_bitrate() being both introduced and deprecated within one
release cycle.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Set the remote address of received sockets.
This is necessary for services that rely on the remote address.
DNS relies on the remote address to be set properly.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Added definition MCUX_SDK_SAI_ALLOW_NULL_FIFO_WATERMARK
to fix timeout fault on the I2S_Speed test
using MIMXRT1170_evk/mimxrt1176/cm7.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Calls to other function may clobber ip & lr too so these register need to
be added to the clobberlist.
r3 is not actually used in z_arm_switch_to_main_no_multithreading so it is
also removed from the clobber list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
