Rename global variable ciphertext used in cbc_mode() to
cbc_ciphertext and move it closer to cbc_mode(). Also, move
global variable iv into cbc_mode() to be consistent with
other *_mode() methods.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
SOC_FAMILY_NRF has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.
SOC_FAMILY_NRF is instead enabled indirectly through being selected by
other symbols.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When networking is selected, building the test
fails with:
error: static assertion failed: "Too many traffic classes"
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
This reverts commit da0f3311ff. It was
clearly intended to be a debugging aid when developing TCP2, not
intended for mainline. This fixes building this sample on POSIX
systems with Makefile.posix.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The sample needs key.c file but that cannot be generated by
sanitychecker. So disable compilation by sanitycheck.
Eventually we should make it possible to compile the sample
using some pre-defined values so that the sample will not
bit-rot but that is for later.
Fixes#21450
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit provides a sample dummy application demonstrating
the usage of the added dynamic Tx power control over the HCI
commands and HCI interfaces.
Signed-off-by: Andrei Stoica <stoica.razvan.andrei@gmail.com>
MQTT Azure and Google IoT samples are based on cloud
infrastructure. It would be nice to place all cloud
based samples in one single folder.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The application main() in Zephyr is defined as having a prototype:
void main(void), as expected by the kernel init (bg_thread_main).
So, correct the different samples and tests that were defined
otherwise.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This samples demonstrates how to connect to Azure Cloud
IoT hub which is based on MQTT protocol. User has to
create an account in Azure Cloud and provide those details
using Kconfig options. This sample first acquires DHCPv4
address and opens a secure connection with Azure cloud.
Then opens a MQTT connection and publish messages randomly.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Remote wakeup for Nordic SoCs should always be enabled.
Thus do not depend it for each SoC. Instead depend it on
chosen driver.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The example should work on the cc3220sf_launchxl by following the same
flow as on other boards, ie. by connecting with plain http by default
and use TLS only when an overlay is specified. We update the
configuration for cc3220_launchxl to not use TLS by default and the
README to point users to the right overlay file to use.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Added some preprocessor directive so that code get compile
for some more nRF52 boards which has only one LED & one button.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Changes in MOVE message handler are as per Mesh Model
Specification which says:
"Upon receiving a Generic Move Set message, the Generic Level
Server shall respond with a Generic Level Status message.
The target Generic Level state is the upper limit of the
Generic Level state when the transition speed is positive,
or the lower limit of the Generic Level state
when the transition speed is negative."
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Removed global variable 'default_tt' & code depend on it
which is redundant as per latest implementation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added support of constrain_temperature() function.
Used constrain_lightness() & constrain_temperature()
whereever possible.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Separately saved default & last target values of lightness,
temperature & delta_uv on flash (using settings layer).
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Split Link Layer implementation uses 80 bytes more ISR stack
in comparison to Legacy Link Layer, hence increase the
required ISR_STACK_SIZE for the BBC micro:bit and other
nRF51 QFAA SoC based mesh and mesh_demo samples.
Fixes#20414.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This sample demonstrates BLE peripheral for ST BLE Sensor.
You can test button notification and LED service using
ST BLE Sensor Android application
Signed-off-by: Marcio Montenegro <mtuxpe@gmail.com>
If we ran out of net_buf's while sending, ignore the issue
and try to finish the test instead. Solving the "running out
of network buffers" case would require careful tuning of
number of network buffers, buffer size, upload speed etc. which
is difficult to solve with generic buffer count options.
The user should tweak mainly the CONFIG_NET_BUF_TX_COUNT option.
Optionally CONFIG_NET_PKT_TX_COUNT can be changed too. Information
about these options is printed to console after the test is finished.
Fixes#20315
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add "sample quit" shell command which can be used to stop the
sample application and allows the generation of coverage report.
Fixes#21099
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Nordic SOC doesn't support multiple system power states, only one
deep sleep state. Replace the old example with a simpler one that can
be used to measure CPU active, normal sleep, and system off modes.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes the CMakeLists.txt file for the stale 'random'
driver sample.
The 'random' driver sample was previously renamed to 'entropy'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The definition was removed in commit 7ccc7889fa ("logging: Remove
SYS_LOG implementation").
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to enable sample to be run and evaluated in sanitycheck,
add a harness_config to validate sample output:
- Add "regex" to match on sample output
- Add "timeout" to save some time when debugging
- Add "ordered" instruction. Since sample is running a while loop
test verdict can potentially be computed on previous run output,
issuing a wrong status.
Last, since sanitycheck regex does not play well them, rework
sample to output without parenthesis.
Tested on disco_l475_iot1
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
echo_client and echo_server configuration for 802.15.4 and OpenThread is
covered by overlay files and default board configuration. Board-specific
configuration for frdm_kw41z was redundant in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds a README.rst for the UP Squared board GPIO counter sample
using details in the application source code and giving context.
This offers overview, requirements, and instructions to build and
flash, in complement to the cited reference.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The sensor API returns the temperature in celsisus degree. The Bluetooth
temperature characteristics uses M = 1, d = -2, b = 0, which corresponds
to a resolution of 0.01 degree. This means that the value returned by
sensor_value_to_double has to be multiplied by 100.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The mesh_badge sample uses a GATT Characteristic instead of a Mesh
Device Property to report the temperature. In addition to that the
status message is filled with with a GATT Unit instead of a the Mesh
Device Property.
Fix that by reporting a Present Device Operating Temperature, ie 0x0054
instead. This has the advantage of keeping the an s16t value to report
the temperature. This however change the marshalled format from B to A.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the value of an unknown sensor property ID is requested, the length
field should represent the value of zero, as explain in the comment in
sens_unknown_fill. However the marshalled representation of a zero
length is wrong in the code. The format A uses a 1-based uint4 length
value, so the range 0x0–0xF represents the range 1-16. The zero length
is represented by format B using the 0x7F value.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functionality of samples/drivers/gpio sample application duplicates
already existing code in samples/basic/blinky and samples/basic/button.
This commit removes the gpio sample application.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
