Implement pthread_getguardsize() and pthread_setguardsize().
pthread_getguardsize() and pthread_setguardsize() are required
by the POSIX_THREADS_EXT Option Group as detailed in Section
E.1 of IEEE-1003.1-2017. However, they were formerly part of
XSI_THREADS_EXT.
The XSI_THREADS_EXT Option Group was required for PSE51, PSE52,
PSE53, and PSE54 conformance.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
This change reduces the space occupied by struct pthread_attr
which is the internal type used for pthread_attr_t.
We cap the stack size at 16 bits (so up to 65536 bytes) and
since a stack size of 0 is invalid, we can encode the stack
size by simply subtracting 1 or adding 1 when setting or
getting.
The schedpolicy is capped at 2 bits and initialized,
cancellable, and detached are given 1 bit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
* Use PTHREAD_STACK_MIN as provided by the specification
instead of a hard-coded value of 1024
* add extra stack size to semaphore tests
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
ESP32 family pinctrl files are currently placed in hal_espressif.
Move to main branch as part of pinctrl dt-bindings.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
It is often confusing for users and developers alike to see the sentence
"stable API change" in a label or in the release notes. Stable APIs can
change in at least two ways (retaining compatibility or not), and so it
is preferrable to use a term that clearly describes the change as
incompatible, by using the common term "breaking".
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In slow networks, like Nb-IOT, when using queue mode,
there might be significant delay between the time we
put the packet into a transmission queue and the time
we actually start transmitting.
This might cause QUEUE_RX_OFF state to be triggered earlier
than expected. Remedy the issue by updating the timestamp on the
moment where packet is accepted by zsock_send().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
There are some issues with the extended endpoint settings. The incorrect
setting leads to the chip being unable to respond with NAK when the host
polls the extended endpoint for data transfers. Additionally, the controls
for the extended endpoint's ISO and PID data sequence are also incorrect.
This commit addresses these issues to properly support extended endpoint
transactions.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
There are two registers that control the selection of one FIFO as data
buffer for 15 endpoints (ep1-ep15). Both registers should be configured
before sending and receiving data. Additionally, there was an issue with
the corresponding FIFO index setting in the 'usb_dc_ep_read_continue'
function, which has been addressed in this commit.
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
This commit introduces some macros and enums which can
be used to parse struct dai_config's format field. This is
required by the SAI driver since it uses dai_config's format
field to select the protocol, clock configuration and clock
inversion. This is added to the dai.h header to avoid having
to define these macros/enums in each of the DAI drivers.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added counter in supported hardware features.
It forgot in the commit when introducing the counter driver.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Turning on clock via clock controller and
resetting PIO device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Turning on clock via clock controller and
resetting PIO device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Turning on clock via clock controller and
resetting ADC device via reset controller on initializing.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Changed how to get clock frequency for PL022
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Removed all function calls from Raspberry Pi Pico SDK
Added functions for setting uart baudrate and format
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Changed how to get xtal frequency for Raspberry Pi Pico
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Due to unresolved bug (see #61129 for details) building TLS tests fails
on vmu_rt1170 platform. Therefore disable this platform for this test
suite.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A first batch of tests for TLS sockets, covering expected socket
behaviors:
* Verify that blocking/non-blocking tx/rx work as expected
* Verify that timeouts on tx/rx are calculated properly
* Verify proper behaviors when interacting with a socket from
different threads (close/shutodown/send).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
