If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Explicity cast to unsigned char so we deal with both this warning and
possible warning when -Wpointer-sign is enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Due to a bug in KBuild, bluetooth samples needed to #include the gatt
sources to re-use code between samples. This bug was not ported to
CMake so we can stop applying this workaround.
gatt source files are now directly added to the 'app' library instead
of having adapter source files in the app's src directory that
\#include's the gatt files.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The UART_NRFX_FLOW_CONTROL Kconfig symbol was renamed to
UART_0_NRF_FLOW_CONTROL in commit 3f99eefe5a ("drivers: uart: Rename
nrf5 namings to nrfx").
The assignments in samples/bluetooth/hci_uart/microbit.conf and
samples/bluetooth/hci_uart/nrf5.conf were updated in the same commit,
but to the wrong name. Change them to use the correct name.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
UART driver renamed to keep the same convention as SPI and TWI drivers.
All substrings: "UART_NRF5" in defines renamed to "UART_NRFX_UART".
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
With updates to bt_gatt_notify and bt_gatt_indicate it is now possible
to pass the Characteristic attribute instead of its value which makes
the code able to verify if attribute properties are set correctly.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This symbol was removed in commit 748f724d82 ("serial: dts: remove
!HAS_DTS related Kconfig"). The setting should come from DTS now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The UART_NRF5_BAUD_RATE Kconfig symbol was removed in commit
748f724d82 ("serial: dts: remove !HAS_DTS related Kconfig"). Looks
like this has been moved to DTS.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove non-existent Kconfig symbol references. An additional (but
related) change is the removal of all persistent storage symbols from
the Arduino 101 Bluetooth shell app, since BT_STORAGE no longer
exists.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Minimal driver for ILI9340 LCD display driver including support
for adafruit 2.2" LCD display (1480)
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
This ensures the every characteristic has a value attribute declared
with the same UUID since the old macro did not declare the value the
application would normally have to declare one itself using a different
UUID which is not allowed.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The sequence number was acting as a stop-gap for missing persistent
storage. Now that we have the settings support in place it's no longer
needed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Enable BT_SETTINGS and remove any custom flash access used for the
sequence number. We do settings_load() before bt_mesh_provision() and
use the return value from the latter to identity that settings_load()
had recoved a full configuration.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Keeping the model struct same sized, change the element pointer to two
indexes, and add a flags member that will be used to track pending
storage actions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of having an RPL-specific storage timer, introduce a generic
one that'll eventually be used for all persistent storage.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial skeleton for doing settings-based persistent storage for
the mesh network state. This patch only includes restoring some core
network state such as IV Index, Sequence number, Net Keys, App Keys
and the Replay Protection list. The remaining state, and actually
storing the state, is left for follow-up patches.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Introduce a basic skeleton for peristent storage based on the settings
subsystem. Also enable support for this to the peripheral sample
application, so the new code gets exersized by CI. For now, the
implementation provides the same level support as the bt_storage API
ever did, i.e. for the identity address and the IRK.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add hardware dependencies and filters to make sure we do not explode if
for example we try to build a sample/test using rtc when the platform
does not support that.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We can use default values of CONFIG_USB_DEVICE_VID and
CONFIG_USB_DEVICE_PID for sanity check builds.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Cover the required steps to use the Controller with Linux's BlueZ and
QEMU, and link to the relevant sections in the subsystem developer
guide.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to avoid duplication, move all information relating to QEMU and
BlueZ from samples to subsystems, and expand to cover BlueZ installation
and usage of Controllers with BlueZ and QEMU in detail.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
With upcoming ICs that are not in the nRF5x family, rename the flash
driver and all its dependencies from nrf5 to nrf.
Should also fix the issue introduced by f49150cab6 which broke the
assignment of the flash device due to a partial rename.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
btusb_bulk_out() reads the EPOUT buffer in multiple of 4 bytes because
of Quark's USB FIFO size limitation. But this has later been taken care
internally in the DW driver making it redundant in hci_usb.
Remove Quark specific handling and read the whole EPOUT buffer at once.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
try_write() writes the whole net buffer to USB which sometimes is larger
than the maximum packet size of an endpoint.
Use the ret_bytes param to know how much has been written to the USB bus
and write the remaining chunks in the subsequent calls.
Usually the USB driver write doesn't happen immediately in cases where
the usb_write() is not synchronous. In such cases, USB driver returns
-EAGAIN.
If driver returns -EAGAIN, yield so as to give other threads a chance
to run while waiting for previous USB write to complete.
Signed-off-by: Sundar Subramaniyan <sundar.subramaniyan@gmail.com>
bt_gatt_discover_params parameter shall remain valid as long as the
procedure is in place.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
With current value of IPV6 Multicast address, IPV6 mcast bind
does not succeed and IPSP use case could not work.
Change use case multicast address to match IPV6 address and
enable binding
fixes: #6050
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We want to move to use a common FLASH_DEV_NAME across the various flash
drivers. So samples, tests, or other code can be a bit more generic. So
replace CONFIG_SOC_FLASH_NRF5_DEV_NAME with FLASH_DEV_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Depending on a path inside the Zephyr tree to determine if we are a test
does not scale. Also some samples were marked as TEST while they are
not, just to get some options defined for tests.
Idenitfying a test will be addressed in another patch introducing
CONFIG_TEST.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It is only necessary to link with subsys__bluetooth if the path
"subsys/bluetooth" is needed as an include directory. None of the
samples have this need.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This makes it possible to pass all IV Update tests without having to
build a custom configuration for some of the tests. We also disable
the feature in all sample configurations, but leave it on in the
tests.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
