Added gpio_loopback to indicate that test requires pins to be
shorten. This allows to filter out tests on setup which does
not have pin setup.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This commit adds the board definition files
needed to support the Arduino Nano BLE 33.
Tested: the following have been verified with
my logic analyzer.
* Serial peripherals (UART, I2C, SPI)
* USB
* RTC
Untested:
* PWM. In theory it should work but I don't
have a good enough logic analyzer to test this
* RTC's. The board doesn't have a backup battery.
The peripherals are enabled for modding another
battery in the device tree.
Signed-off-by: Jefferson Lee <jeffersonlee2000@gmail.com>
The dma test applications for MEM-to-MEM transfers are modified
to run on the stm32l476 with a DMA.
The CONFIG_DMA_LOOP_TRANSFER_DRV_NAME is either DMA_1 or DMA_2
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 1 to 7 for DMA_1
CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 1 to 5 for DMA_2
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The dma test applications for MEM-to-MEM transfers are modified
to run on the stm32wb55 with a DMAMUX
loop_transfer on any CONFIG_DMA_LOOP_TRANSFER_CHANNEL_NR from 0 to 13
chan_blen_trasnfer on CONFIG_DMA_TRANSFER_CHANNEL_NR_0 from 0 to 13
and on CONFIG_DMA_TRANSFER_CHANNEL_NR_1 from 0 to 13
Signed-off-by: Francois Ramu <francois.ramu@st.com>
It adds flexibility to test different dma channels
The chan_blen_transfer is modified
like the loop_transfer application to support stm32xx devices
with dma and/or dmamux.
On the stm32 devices, the first dma channel is 1.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds support for emulated GPIO (CONFIG_GPIO_EMUL=y) and
additionally allows BOARD=native_posix and
BOARD=native_posix_64 to run the gpio_api_1pin test suite.
Fixes#26477
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This adds support for emmulated GPIO (CONFIG_GPIO_EMUL=y) and
additionally allows BOARD=native_posix and
BOARD=native_posix_64 to run the gpio_basic_api test suite.
Fixes#26477
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Introduce the field that can be used to associate a given sampling
sequence with any other data needed in the sampling-done callback
function.
Adjust one ADC API test case that uses a sequence callback so that
it checks if this introduced field is propagated as expected.
Also clarify in the description of the `sequence` parameter of the
callback function that this parameter is not supposed to be supplied
to the CONTAINER_OF() macro, to avoid any further confusion in that
regard.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert tests to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added tests for the timing algorithm.
The tests calculate timings for some bitrates with sample-points
and verify the results.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
This reverts commit cabbd916cf.
This is considered to be useful enough that it should be restored
as a stable Zephyr API.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Added test for reseting CC timeout. CC is reconfigured just beofre
expiring of the first CC. It is expected that first setting will never
expire.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
NPCX7 includes a 10-bit resolution Analog-to-Digital Converter (ADC). Up
to 10 voltage inputs can be measured and a internal voltage reference
(VREF), 2.816V (typical) is used for measurement. It can be triggered
automatically in Autoscan mode. Each input channel is assigned a
separate result register, which is updated at the end of the conversion.
The CL also includes:
— Add npcx adc device tree declarations.
— Zephyr adc api implementation.
— Add adc definitions of npcx7 in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
Signed-off-by: Mulin Chao <MLChao@nuvoton.com>
Adding support for Quectel BG95 Modem offloaded driver
to zephyr.
The driver currently implements only the
client side functions of the "socket_op_vtable", and
so cannot be used for cases where Zephyr acts as a
server. Moreover the driver only supports TCP for now.
Looking through the guides, the same driver should be
usable for BG96 (and other modems) except for the modem
boot-up sequence. Hence its named as "bg9x" instead of
"bg95".
Tested extensively with Zephyr acting as MQTT endpoint
and publishing / subscribing data to / from an MQTT
broker.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Add build test for Xilinx drivers for devices which are not present on
any in-tree boards.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Make this driver multi-instance and use the new API.
Notes for sensorhub mode:
In case of multiples devices it is possible that some of them
has i2c slaves attached to it (sensorhub mode) but not the
others. Since the driver is configured in the same way for
all the instances (CONFIG_SENSORHUB=y), the routine that initialize
the sensorhub part does not fail anymore in case no slaves
are found for a particular instance. Instead, those non-sensorhub
driver instances will set the shub_inited flag to false and
will totally ignore the feature.
Notes for triggers:
In case of multiples devices the device pin the interrupt wire is
attached to can be different (INT1 or INT2 pin). So, this
information has been moved in DTS and then stored in the
specific instance config structure.
Currently the driver is able to handle a sngle interrupt line
at a time attached to either INT1 or INT2.
MOreover, the interrupt initialization for a driver instance proceed
only if the drdy has been configured in its DT, else it returns ok.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Convert handful of users of DEVICE_INIT to DEVICE_DEFINE or
SYS_DEVICE_DEFINE to allow deprecation of DEVICE_INIT.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As documented in doc/guides/dts/api-usage.rst, the generated
devicetree macros should be considered an implementation detail.
Replace direct usage of one with an equivalent that uses the API.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Now that we have a BMI160 driver and emulator pair that support both
I2C and SPI, add a test that runs over both buses.
Signed-off-by: Simon Glass <sjg@chromium.org>
1. Add more detail info to make the purpose and process
of the test cases more clear which include test goal,
test step, input, judging criteria, constraints, etc.,
and these can be seen in our Zephyr documentations.
2. Add some negative test code.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
Add support to build all current modem drivers (WNCM14A2A, GSM PPP, and
ublox-sara). We need a unique config for ublox-sara to be built since
the networking params conflict with other modem drivers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Extend the test_single_read test case to catch RX_RDY events that are
not expected to appear.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The IIS2ICLX is a high-accuracy. ultra-low noise, low-power
two-axis linear accelerometer which can be interfaced through
either I2C or SPI bus.
Its high accuracy, stability over temperature and repeatability
make IIS2ICLX particularly suitable for inclination measurement
for industrial applications (inclinometers).
https://www.st.com/resource/en/datasheet/iis2iclx.pdf
This driver is based on stmemsc i/f v1.03.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Code checks if gpio_port_set_masked_raw overwrites masked pins.
It should detect that the attempt to set only the input pin to zero also
affected the output pin.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Stable API change: modify parameters of clock_control_async_on which
previously took a structure which contains list node, callback and user
context. Removing list node and replacing structure with two parameters:
callback and user context. List node is removed because it has no use
in current API.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added test which is calling uart_poll_out from various contexts and
asynchronous/interrupt driven API. Test is validating that calls
can be preempted at any moment and no data is lost.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The cached device pointer must be placed in memory that allows user
mode invocation of the test functions to access it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
