If UART_INTERRUPT_DRIVEN isn't selected the CDC ACM class driver won't
build. Don't require the user's intervention to avoid this.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the file structure for USB DFU class to facilitate
separate PID for USB DFU when in DFU mode. As required by USB DFU
1.1 Section 2, the PID in the USB device descriptor must be
different between the Run-time and DFU mode device descriptor to
avoid problems caused by the host OS caching the remaining
descriptors when switching to DFU mode, thus hiding the new
interface descriptors from applications on the host and reporting
the Run-time descriptors when the device is in DFU mode.
To avoid adding too much clutter to the root USB class Kconfig and
CMakeLists files, move the DFU class files into their own directory
with dedicated Kconfig and CMakeLists.txt.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
The USB device descriptors for DFU mode should only change after a
USB reset, not in appDETACH as the device is still in run-time mode
until reset; thus should still return the run-time descriptors when
requested.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
In accordance with USB DFU 1.1 Section 5.1, a device should only
stay in appDETACH for a given period of time, either from the
DFU_DETACH request (wValue ms) or from the wDetachTimeout property,
after which the device should return to appIDLE.
Signed-off-by: Michael Rosen <michael.r.rosen@intel.com>
Convert drivers to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kconfig USB_DFU_WAIT_DELAY_MS was hidden.
Added prompt for it so it can be configured.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
It is possible that USB DFU class is used by MCUBoot
itself while it has enabled CONFIG_SINGLE_APPLICATIO_SLOT.
In this mode only application slot is the primary slot.
Adapted DFU class descriptor and services to optionally
serve only for one image.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
End of DFU operation was signaled after the last usb dfu request was
received. Therefeore wait_for_usb_dfu() terminated so fast that
dfu_work_handler() was not called by k_work_queue befor.
wait_for_usb_dfu() should terminate after DFU operation was completed.
For fix that k_poll_signal_raise() was moved after the flash write
operation.
fixes#29611
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Status callback was logging whenever some statuses where
present. Those are not used by HCI class so drop them
and do not LOG if not necessary.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB bus might be suspended to save power. After the device
is Resumed from Suspended state there is a need to restart
OUT transfers for Endpoints used by HCI class. The transfers
shall be restarted only if the device was Resumed after Suspend
from Configured state. This patch applies the fix.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Add prompt to USB_DEVICE_NETWORK_ECM_MAC Kconfig option to allow
users to change it. The current default value is assigned for
documentation purposes in RFC 7042.
Signed-off-by: Joakim Algrøy <joakimalgroy@gmail.com>
The existing calculation of the BULK_EP size can sometimes result in a
bulk EP size that is not spec-compliant. The accepted BULK_EP sizes are
8, 16, 32 or 64 bytes.
Additionally, the INT_EP size is always set to the max EP size since
BT_BUF_RX_SIZE is always greater than that (min. 73 in Kconfig).
This commit sets the BULK and INT endpoint sizes to their maximum
supported values.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The USB infrastructure currently uses the system work queue for
offloading transfers, CDC-ACM UART transmission/reception, and device
firmware activities. This causes problems when the system work queue
is also used to initiate some activities (such as UART) that normally
complete without requiring an external thread: in that case the USB
infrastructure is prevented from making progress because the system
work queue is blocked waiting for the USB infrastructure to provide
data.
Break the dependency by allowing the USB infrastructure to use a
dedicated work queue which doesn't depend on availability of the
system work queue.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The z length modifier must be applied to avoid build errors when the
format is verified by the compiler on systems where size_t is larger
than int.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Both tx_irq_ena and rx_irq_ena flags shall be updated only
by using UART API. Those flags are used to let the device
start sending or receiving data. Changing those flags without
awareness of the user may lead to errors.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Usage of `pool_wait_sem` was incorrect. The semaphore shall be
dependent on context it was called for. In case of many CDC_ACM
devices one could possibly block others. This fixes an issue by
making semaphore a part of the internal CDC_ACM device structure.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit fixes an issue when more than one USB transfer is
reserved for same OUT endpoint.
There are 2 scenarios when this could happen:
- The Host sends SET_CONFIGURATION(1) request twice.
- The Host triggers Suspend->Resume->Configured
event sequence for the device.
USB tranfers are not canceled on SUSPEND event
when the device was not configred previously.
Because of that USB transfer slot is reserved twice
for the same OUT endpoint and lead to shortage of USB
transfer slots quickly.
Without this patch CDC ACM class reserves duplicated USB
transfer slots for one transfer. The sequence of
Suspend->Resume events is genereted alongside with
Configured and the stack will shortly run out of transfer
slots.
If the Host, for some reason, decides to send
SET_CONFIGURATION request twice the same issue is seen.
This patch prevents from reserving additional USB transfer
slots twice.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB device shall be able to send only in CONFIGURED state.
Zephyr USB HID device class allows to send the data no matter
of the USB state what is wrong. Attempting to write to endpoint
buffer in state != CONFIGURED may lead to driver error.
This patch introduces state tracing for USB HID class and
allows to send data using hid_int_ep_write() class API
only if the device remains in CONFIGURED state.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This adds a new config option for SAM0 targets that use the BOSSA
bootloader. If the CDC ACM driver is also enabled, then the
programmer can automatically reset the board into the bootloader for
programming.
Signed-off-by: Michael Hope <mlhx@google.com>
This is called when the USB host changes the virtual baud rate.
This is used by Arduino style boards to signal that the board should
reset into the bootloader.
Signed-off-by: Michael Hope <mlhx@google.com>
Transfers are cancelled on suspend event, OUT transfers
needs to be re-trigger on resume.
Rework event handling to filter out spurious resume
events and re-trigger transfer if previous event was
a suspend event.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Configuration file was left unchanged after development
of USB Audio class. Deleted configs should never be present.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB is sending data from LSB to MSB. Same happens for each field
of the USB setup packet.
This patch convert USB setup packet to proper form when its read
out from the line.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Sets thread names for all usb device class threads (bluetooth, bt_h4,
mass storage, and rndis) to aid debug.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit updates USB audio class implementation with
DT changes introduced in 7e0eed9235. In particular rename
DT_NUM_INST to DT_NUM_INST_STATUS_OKAY.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
By this commit USB audio class implementation is introduced
to Zephyr.
The Zephyr USB audio device class follows bellow
documentations:
- Universal Serial Bus specification rev2.0 (usb20.pdf)
- Universal Serial Bus Device Class Definition for Audio Devices
(audio10.pdf)
- Universal Serial Bus Device Class Definition for Audio Data Formats
(frmts10.pdf)
- Universal Serial Bus Device Class Definition for Terminal Types
(termt10.pdf)
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Flash drivers may impose alignment requirements on the destination
buffers due to use of DMA transfers. In particular Nordic QSPI flash
API requires that addresses, sizes, and buffers all by 4-byte aligned.
Align the page buffer to satisfy this requirement.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This makes hci_raw to manage RX and TX buffers so its logic don't have
to be replicated on each an every driver/application, it also makes it
simpler to deal with extra headers for H:4 mode since that then can be
done at earlier at buffer allocation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for registering a command extention table which is
used to match incoming commands and then pass the buffer to its
function handler.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds 2 config options which enables hci_raw to work in
H:4 mode and enable it by default automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer are allocated with K_FOREVER should never fail, in addition to
that asserts needs to be enabled and is not worth converting to runtime
check given the use of K_FOREVER.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_RX_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Allowing to configuring the MPS different then the buffer size might
actually generate data fragmentation/reassembly so this just use
BT_BUF_ACL_SIZE which is set accourding to the controller buffer size.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
