The LwM2M firmware pull object no longer uses the system workqueue
to execute firmware_transfer(), but directly executes it itself.
Previously, the workqueue would be blocked because firmware_transfer()
indirectly calls a blocking connect(). This would lead to problems
with e.g. modem drivers that use UART to interface with the modem
hardware, as some UART drivers use the workqueue.
Fixes#31053.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
It is documented that using transient information like whether a work
item is pending or a delayed work item has time left to determine the
state of the work item before subsequent reconfiguration is prone to
race conditions, and known to produce unexpected behavior in the
presence of preemptive threads, SMP, or use of the work item from
interrupts. As a best practice such pre-validation steps should be
avoided unless algorithmically necessary.
All comparisons of remaining delayed time before canceling a delayed
work item in this module appear to be optimizations subject to the
above race conditions. Remove the checks so that only the inherent
race conditions in the implementation of canceling a work item remain.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
With this patch the resolver module can resolve literal IPv6
and IPv4 addresses even when DNS client is not presnet in
the system.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
During recent upmerge OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION__COUNT_ARGS
macro was renamed to OPENTHREAD_CONFIG_PLAT_LOG_MACRO_NAME__COUNT_ARGS
but the code wasn't updated where the macro is actually used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If getaddrinfo() was called with AI_PASSIVE flag in hints,
returned address defaulted to SOCK_STREAM and IPPROTO_TCP.
Fixed so that SOCK_DGRAM leads to correct address type
that can be fed to bind() directly.
Same hard coding was visible when numerical IPv4 address string
was converted to binary. That is also fixed to respect hints now.
Also, added functionality to get IPv6 address, when hints contained
AF_INET6.
Fixes#30686
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Add option to enable software CSMA backoff in the OpenThread MAC layer.
This allows to run CSMA procedure correctly in radios that do not
support hardware CSMA backoff, and use them as RCP, where this feature
is required.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit adds a missing otPlatSettingsDeinit function
to the Zephyr OpenThread platform implementation.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Previously, lwm2m_engine set would check against the max_data_len
parameter of the ressource, but didn't take into consideration the
(possibly changed) max_data_len returned by the pre_write callback.
Fixes#30541
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
In mqtt_keepalive_time_left(), return -1 if keep alive messages are
disabled by setting CONFIG_MQTT_KEEPALIVE=0.
This allows to use mqtt_keepalive_time_left() directly as an input
for poll(). If no keep-alive is expected, -1 would indicate
that poll() can block until new data is available on the socket.
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
The message should only be returned if the requested pending/reply
pointer is not NULL. Otherwise it could get an incorrect match (for
instance if specific pending pointer is searched for and reply is NULL
the function could return any message that doesn't expect a reply (and
thus has its reply pointer set to NULL).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine by default sends piggybacked responses for requests after
all callbacks are executed. This approach however isn't good enough if
the application callback executes some lenghty operations (for instance
during FW update). Delaying the ACK may result in unnecessary
retransmissions.
This commits adds an API function which allows to send an early empty
ACK from the application callback. This prevents further retransmissions
from the server side. After all callbacks are executed, the LwM2M engine
will send the response as a separate CON message.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify if block tranfer is used and not an initial block when skipping
directly to data processing during FW update in PUSH mode.
This fixes a bug, which caused TLV not to be processed when the FW
object was updated as a whole, and actual resource number was encoded in
a TLV (for instance when writing FW Update URI).
Fixes#30135
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework the bootstrap DELETE operation, to support deletion of multiple
resources.
Current implementation had several oversimplifications, making it not
spec-compliant:
* DELETE `/` removed only Security object instances (!= 0)
* DELETE `/x` was handled as DELETE `/x/0`, therefore not removing all
of the object instances.
Since the above is only supported during bootstrap and not regular
Device management, this functionality was implemented in the
`bootstrap_delete` function, which now will be called for all DELETE
operations initiated during bootstrap. The regular LwM2M DELETE handler
will only be called during regular Device management, as it has more
strict limitations on what can be deleted.
Additionally, handle empty URI Path option as `/`, therefore indicating
deletion of all resources.
Fixes#29964
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If networking pre-emptive thread priorities are enabled,
then use the proper macro to enable them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because unoconnected stream socket doesn't have any chance to receive
any data, so a blocking recv() would hang forever on it (and does
without this change).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
* Add RCP library.
* Conditionally remove non required libraries not required for RCP.
* Drop :option: marker for CONFIG_OPENTHREAD_NCP_SPINEL_ON_UART_ACM
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This change enables support for DNS service discovery
(RFC 6763) in the mdns_responder service and sample app.
Fixes#29429
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change adds support for DNS Service Discovery (DNS-SD)
as described in RFC 6763.
Fixes#29099
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add a simple backoff mechanism between consecutive registration attempts
in case of registration failures. Finally, notify the application in
case the registration failed several times.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the boostrap regstration procedure, by splitting the message
creation and sending into a separate function, in similar manner as
it's done with regular registration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, when socket errors occur during receive, the LwM2M engine
restarts the state machine and registers again to the server. While this
works in simple use case (only RD client socket open), it's not a valid
approach when more sockets are open (FW update socket).
Fix this by introducing socket fault callback, which is registered by
the LwM2M engine users. This way, a proper socket owner is notified on
error and can pertake appropriate action.
For RD socket errors the behaviour remains the same - the state machine
is reset and the client registers again to the server. For FW update
socket, handle the error by reopening the socket and retransmitting the
last request. This allows to resume the download from the point the
error occured, w/o a need to start from scratch.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Call mbedtls_ssl_conf_max_frag_len() on created TLS context
configuration, so that Maximum Fragment Length (MFL) will be sent to
peer using RFC 6066 max_fragment_length extension. MFL value is
automatically chosen based on MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN mbed TLS macros.
This extension is mostly useful for TLS client side to tell TLS server
what is the maximum supported receive record length.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
If there are enough tls_context objects in the system (configured by
CONFIG_NET_SOCKETS_TLS_MAX_CONTEXTS), but there are not enough file
descriptors (configured by CONFIG_POSIX_MAX_FDS) to create underneath
TCP/UDP socket, then TLS socket creation fails with leaked tls_context.
Call tls_release() in ztls_socket() error path whenever underneath
TCP/UDP socket creation fails.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
According to LwM2M specfication v1.0.2, par. 5.3.2, the LwM2M client
MUST send an “Update” operation to the LwM2M Server whenever the
lifetime parameter of the Server object changes the server). The same
applies for the object instances created/deleted. The changes in objects
seem to already be handled, but the lifetime was not.
Additionally, the "Update" message shall only contain these parameters
which changed since the last update (including objects). As it's
straightforward to determine if the liftime changed but it's not easy
to tell if there were updates in the object instances, add an
additional parameter to the engine_trigger_update() function, indicating
that new object information shall be sent in the "Update" message.
Eventually add a proper error checking in `sm_send_registration` as the
function is reworked anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The memset on firmware_ctx during PULL FW update initialization will
set the socket descriptor to a valid value of 0. This leads to an error
if parsing of the URI provided by the server fails, and the firware_ctx
is closed - the socket with a descriptor 0 will be accidently closed.
Fix this by invalidating the socket FD after the memset on
initialization.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It shouldn't be optional to handle separate response, as it's a
mandatory requirement according to the RFC7252:
"The protocol leaves the decision whether to
piggyback a response or not (i.e., send a separate response) to
the server. The client MUST be prepared to receive either."
Therefore, remove the flag as separate responses are handled now
properly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Separate response handling implemented in the engine was faulty. The
separate response was not acknowledged by the client, resulting in
spurious retransmissions from the server side.
Also, the pending CON message was retransmitted by the client even after
it was acknowledged by an empty ACK, but the respnse haven't arrived
yet. Fix this by adding a new `acknowledged` flag to the `lwm2m_message`
structure. Once acknowledged, the flag is set and the confirmable
message is no longer retransmitted. We keep the message on the pending
list in order to timeout properly in case separate response does not
arrive in time.
Finally, prevent the reply callback from being called twice in case
the response is transmitted separately from ACk. The callback should
only be called on the actual reply, not the empty ACK.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far this function existed as a static function in LwM2M PULL FOTA
module. Since such functionality will be needed in other places, make it
an internal API function.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Some LWM2M backends/servers, such as emxq, expect the sequence numbers
to begin on 0.
This change is in line with how other lwm2m clients, such as Anjay and
Wakama, starts the notification sequence.
Signed-off-by: Viktor Sjölind <viktor.sjolind@endian.se>
Prior to this commit, the LwM2M stack would TLV-encode integers
depending on their internal storage size. An integer with value 5 stored
in an int8_t would be encoded with length 1, but an integer stored in an
int32_t would be encoded as "00 00 00 05" with length 4.
This commit checks if the value is castable to a smaller int and encodes
it as such if so. This is cascading, so even a 64 bit integer with value
5 will be encoded with length 1.
Note that this does not seem to be required by the specification, but
this is how Anjay and the other LwM2M stack seem to do it.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Currently, there is a case for net_config_init function that for
timeout==0 and when iface is already up, the ip setup is not proceed
and the error message "Timeout while waiting network..." is logged.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Adds the socket option TLS_ALPN_LIST for SOL_TLS sockets
Passes the configured alpn list to the mbedtls config
on mbedtls init
Signed-off-by: Emil Hammarstrom <emil.hammarstrom@assaabloy.com>
These defines are leftover of old platform settings implementation
and are not used any more.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The name of the connection manager thread (conn_mgr_thread) was
unnecessarily long in "kernel stacks" command. So make the name
to "conn_mgr" which fits nicely to the output of that command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Another team reported that current default values for number of allowed
IP addresses per child (4) and and max number of children (10) are too
small for some customers.
Increased the values allowed configuring child count.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
OpenThread mac counters require rx failed notification to work properly.
Made use of previously implemented notification.
Signed-off-by: Marek Porwisz <marek.porwisz@nordicsemi.no>
A normal websocket close sequence:
close(websock) ->
websocket_close_vmeth() ->
websocket_disconnect()
close(ctx->sock) called in the function websocket_disconnect()
and cause websocket_close_vmeth() called again.
Finally stack overflow by loop close call.
It's maybe a side-effect by PR #27485
Signed-off-by: Jackie Ja <qazq.jackie@gmail.com>
Improve token handling by removing special meaning of tokenlen == 0,
which allows to handle server requests w/o a token (so far such
requests would cause the lwm2m engine to autogenerate token in the
response).
In order to autogenerate token during message initialization, use
special symbol `LWM2M_MSG_TOKEN_GENERATE_NEW`. If no token is wished to
be used, simply set the tokenlen to 0.
Additionally, fix an issue with token autogeneration, where invalid
token len was used (0 instead of 8).
Fixes#28299
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
LwM2M engine did not set response code for the Bootstrap-finish message,
hence it replied with the code copied from the request which is not
correct. Fix this by setting correct code for the Bootstrap-finish
reply.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, `LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event was
reported before the final ACK for the Bootstrap Finish was sent from the
client side. This could cause delays in the ACK sending, in case the
application wanted for instance to store the received data in flash.
Fix this, by reporting the
`LWM2M_RD_CLIENT_EVENT_BOOTSTRAP_TRANSFER_COMPLETE` event on the next
state tansition (before the actual registration starts).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
"Public Key or Identity" resource is of opaque data type, therefore it's
not correct to assume it will be a NULL terminated string (the existing
servers, for instance Leshan, does not include NULL terminator). Use the
actual size associated with the resource instead.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So far, the resource instance structure kept only the information about
the buffer length provided to the resource (in the `data_len` field).
While this approach might be enough for integer resources, where the
actual data size is fixed, it did not work for opaque resources. It is
impossible to determine the actual opaque resource length after it's
been written into.
Fix this, by replacing the current `data_len` field of the
`lwm2m_engine_res_inst` with `max_data_len`, indicating the buffer
size, and making the `data_len` field to hold the actual data size of
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Currently, after `CONFIG_LWM2M_RD_CLIENT_SUPPORT_BOOTSTRAP` is enabled,
the LwM2M engine will initiate bootstrap procedure on each run. This
approach limits the flexibility of the application, as it's not always
necessary to go over the bootstrap procedure (for instance, the
application may decide to store the security object obtained during the
bootstrap in flash, and restore it on boot).
Fix this by introducing an additional `flags` parameter to the
`lwm2m_rd_client_start()` function, which provides information whether
to run bootstrap in the current session or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
