Tigerlake H has less RAM and fewer cores. Both should be
supported, selectable at the board level. For now use the H
configuration as more readily available for testing.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
1. SOF doesn't have to be built in .bin format
2. don't include soc.c and soc_mp.c twice in cmake
3. remove an unused mailbox.h header
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
CAN_MCP2515_MAX_FILTER is not needed anymore and was probably just a
misunderstanding. Aligned it with the other CAN drivers.
This also was the last difference in the mcp2515 specific config for the
can sample, so that can be deleted as well.
Signed-off-by: Karsten Koenig <karsten.koenig.030@gmail.com>
Adds multicore support for lpcxpresso55s69 board.
Documentation to be updated in a later commit.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Currently a lot of common kconfig options are being set in
board-specific overlays.
This commit puts them in the main prj.conf.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Get rid of weak functions adding a new API to register an object to
receive notifications when the system changes power state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This fixes an incorrect error message log statement for IPv4 vs.
IPv6 in several net samples.
The error message is in a portion of the files dealing with IPv4
bring-up. If the address is invalid, it logs the invalid address;
however, the IPv4 statement incorrectly refers to ipv6_addr. This
PR corrects it to output ipv4_addr as expected.
Signed-off-by: Steve Winslow <steve@swinslow.net>
The --nrf-family argument has been unnnecessary since 6628a16
(" runners: nrfjprog: boilerplate and recover rework").
Remove a few stragglers that are still using it, to avoid it being
copy/pasted into other board definitions.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adds the Sound Open Firmware project, built as a Zephyr application,
under samples/subsys/sudio/sof.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Commit https://github.com/zephyrproject-rtos/zephyr/commit/0a018db0f
increases worqueue stack size for overlay-fs.conf
exclusively.
overlay-bt.conf also need to be updated as enables mcumgr FS
command set as well.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Extend the nrf52840dk_nrf52840 sample overlay with a fstab entry for a
littlefs file system on the storage partition.
This eliminates the need for application configuration of the file
system parameters and mount data.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Musca-S1 is a Cortex-M33 based SoC. It's similar to the
Musca-B1, but among other things the embedded flash has
been replaced with embedded MRAM (eMRAM) memory.
The Musca-S1 files have been created based on the Musca-B1
SoC and board files.
Add the Musca-S1 board to the list of allowed platforms
for the TF-M integration examples.
Change-Id: I4f517d28d0a5b8c4a3fc3fab73adb5519acfc3c2
Signed-off-by: David Vincze <david.vincze@linaro.org>
Add sample code which demostrates the use of the offset
register offered in the TMP117.
Also add information about tmp117 in README.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Convert samples to DEVICE_{DT_}DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit replaces the 'select SHELL' statement with
'depends on SHELL' in OPENTHREAD_SHELL config option.
This ensures, that shell will not be implicitly enabled
when OpenThread stack is built.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Add a sample for demonstrating the usage of the NXP MCUX Analog
Comparator (ACMP) sensor driver. The sample currently only supports the
NXP TWR-KE18F development board.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Reordering of the struct elements to match the Linux format.
The __packed() is not necessary anymore.
std_id and ext_id is merged to id in the frame and filter.
Additionally, the frames are ready for CAN-FD.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The previous API can't change the sampling-point and only allowed
bitrates that fit the time segments.
The new API allows for shifting the sampling-point and adjusts the
number of time quantum in a bit to all more possible bitrates.
The functions to calculate the timings are moved to the can_common file.
They can be used for all drivers.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Add thread runtime statistics to the thread analyser.
With CONFIG_THREAD_RUNTIME_STATS enabled:
Booting from ROM..*** Booting Zephyr OS build zephyr-v2.4.0-2330-g77be0e93e65b ***
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 740 usage 284 / 1024 (27 %); CPU: 0 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 98 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 0 %
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
thread_b: Hello World from cpu 0 on qemu_x86!
thread_a: Hello World from cpu 0 on qemu_x86!
Thread analyze:
thread_b : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 7 %
thread_analyzer : STACK: unused 8 usage 504 / 512 (98 %); CPU: 0 %
thread_a : STACK: unused 648 usage 376 / 1024 (36 %); CPU: 9 %
idle 00 : STACK: unused 204 usage 116 / 320 (36 %); CPU: 82 %
thread_b: Hello World from cpu 0 on qemu_x86!
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a section about executable files produced by the build, as well as
how to access them.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Removed reel_board specific config and dts overlay.
Configurations are moved to reel_board defconfig.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Update documentation using west enhancements and add sections related to
newer overlays.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add OpenThread overlays. This allows users to evaluate UpdateHub using
Thread Network.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add Bluetooth Low Energy IPSP overlays. This allows users to evaluate
UpdateHub using BLE with IPSP supported by Zephyr.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add IEEE 802.15.4 overlays. This allows users to evaluate UpdateHub
using 6lowPAN.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add MODEM and Arduino header overlays. This allows users to evaluate
UpdateHub using any MODEM supported by Zephyr which supports UDP and
PPP connection.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add WIFI overlay and connection request. This allows users to evaluate
UpdateHub using any WIFI supported by Zephyr which supports UDP.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Add support to Network Management in UpdateHub sample. This allows
start application based on network events, independent of the media
type selected by users.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Remove NET_CONFIG_SETTINGS Kconfig option. The net settings should
be enabled from now at project config or at any overlay. This is
necessary to allow better control when application should start.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
A dedicated LwM2M execute callback type has been implemented which
supports execute arguments. The lwm2m engine, lwm2m_client sample and
lwm2m objects have been updated accordingly. Also the API change has
been documented, and the lwm2m engine reference has been updated.
Fixes#30551.
Signed-off-by: Maik Vermeulen <maik.vermeulen@innotractor.com>
Updated lvgl sample.yaml file to build the lvgl sample during
sanitycheck for the native_posix board with the dummy display driver and
Kscan disabled.
Using the dummy display driver and disabling Kscan removes the
dependency towards the availability of libdsdl2 on the host system.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Remove the DTS overlay files for nRF5340 DK and PDK,
since the SRAM partition changes are matching the
default SRAM partitioning in these boards.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
