Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit updates the Nordic HAL (hal_nordic) to pull in the fixes
for the warnings observed when building with the GCC 12.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update various modules to the latest upstream, this is to include the
latest header prefix fixes.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Zephyr kernel is dependent on trace.
Trace is dependent on segger rtt.
Segger rtt MUST NOT be dependent on zephyr kernel.
Move lock functions from header into c file to avoid circular
dependency. This fix needs an update of the segger repository.
Fixes#43887.
Signed-off-by: Christoph Coenen <ccoenen@baumer.com>
Update lvgl for devicetree updates.
Remove Kconfig symbols that don't exist anymore since these values are
coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update hal_ti module to pull improvements on how required definitions
are passed to the build.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move OpenThread's glue code along with the Kconfig files that configure
OpenThread stack itself into module directory.
Update the maintainers file to reflect this change.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This update brings the following changes from 'hal_ti':
b00ac9b simplelink: cc13x2_cc26x2: include flash driverlib sources
bcc5286 zephyr: kconfig for CC13x2P / CC26x2P variants
c54f72e zephyr: kconfig for CC13x2 / CC26x2 custom RF HWAttrs
b6ca1ac cc13x2_cc26x2: update to TI SimpleLink SDK 4.40.04.04
The b00ac9b ("simplelink: cc13x2_cc26x2: include flash driverlib
sources") is required by recently introduced on-chip flash driver
for CC13xx/CC26xx series.
Fixes: #47461
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The main CMakeLists.txt for hal_atmel adds an include directory
without checking that the module is enabled. This causes ALL Zephyr
builds to have modules/hal/atmel/include in their included
directories. This commit updates west.yml to point to a fix for
this issue.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This update updates the TraceRecorder module from version v4.6.0
(RC1) to v4.6.3. This update fixes some minor bugs where
deleted threads werent removed from the thread table. This
update is also in preparation for updates which changes
some trace hook arguments in Zephyr.
The update to v4.6.3 also improves syscall tracing by
including the id and name as parameters when logging
these events.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Some EFR32 SoCs use a secure element subsystem to manage
security features (i.e., TRNG, secure bootloader or cryptographic
functions).
This driver relies on the SE Manager high-level API provided by Silicon
Labs. The API interacts with the SE subsystem, provides helper functions
to achieve cryptographic operations and ensures that only one operation
is running at a time by using mutexes and semaphores.
Instead of relying on the SE Manager from Silicon Labs, one could
recreate the behaviour of the Manager and put the code in the crypto
driver folder and create a dependency for other drivers using the crypto
manager (e.g., keys, entropy).
I went for the SE Manager API as it is already there and supported by
Silicon Labs.
Tested using the random subsystem.
Signed-off-by: Steven Lemaire <steven.lemaire@zii.aero>
lwm2m: Regenerate lwm2m_senml code from the CDDL description.
Reapply manual changes.
Create a sh script to perform the regeneration.
tests: zcbor_bulk: Adapt to zcbor 0.5.1
zcbor_new_decode_state() now has no return value.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
MCUboot was synchronized up to upstream:
1270880d2f717f9019742f5c450441aaf0504164
- boot_serial: refactoring and optimalization (mainly afects
progressive erase implementation)
- migrate includes to <zephyr/...>
- switched DFU detection GPIO-pin configuration to be done through DTS.
That pin is assigned thanks to `mcuboot-button0` pin-alias.
- boot_serial: Fix echo command code no longer compiling
- Added MCUboot status callback support, see `CONFIG_MCUBOOT_ACTION_HOOKS`
Kconfig option.
- reworked LED usage, prefer DTS mcuboot-led0 alias over bootloader-led0
alias
- Added initial support for leverage RAM-LOAD mode with the zephyr-rtos
port
- boot_serial: Upgrade from cddl-gen 0.1.0 to zcbor 0.4.0
- imgtool: Added support for providing the signature by 3rd party
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mostly includes minor maintainability updates:
- ci: Add building the HW models as a github workflow
- irq_sources: Remove unneeded irq_sources.h
- irq_ctrl: Define IRQ names inside HW models
- HW_models: NRF_RADIO: Set missing NRF_RADIO states
- HW_models: NRF_RADIO: Disable radio state while RXDISABLE
- HW_Models: NRF_PPI: Enable ppi task and event for TIMER0 CH3
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Pull in a fix in the nrfx_qspi driver for a problem with incorrect
status returned by `nrfx_qspi_mem_busy_check()`.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For targets without thread local storage, we need to use the builtin
per-thread errno support provided by Zephyr as the multi-thread errno
support provided in picolibc relies on TLS.
Signed-off-by: Keith Packard <keithp@keithp.com>
This code has gone unmaintained and bugs continue to be reported
against it. We do not have the resources as a project to maintain this
in "odd fixes" mode, and nobody has stepped up to maintain it [1], so
sadly this must be removed for now.
If anyone would like to see civetweb supported in upstream Zephyr
again, they are welcome to add it back, as long as they promise to
maintain it going forward.
Many thanks to everyone who has contributed to civetweb support in
Zephyr while it was here. So long and thanks for all the fish.
Fixes: #45807Fixes: #43910Fixes: #34226Fixes: #46743
[1] https://lists.zephyrproject.org/g/devel/message/8466
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Picolibc is a fork of newlib designed and tested on embedded systems. It
offers a smaller memory footprint (both ROM and RAM), and native TLS
support, which uses the Zephyr TLS support.
By default, the full printf version is included in the executable, which
includes exact floating point and long long input and output. A
configuration option has been added to switch to the integer-only
version (which also omits long long support).
Here are some size comparisons using qemu-cortex-m3 and this application
(parameters passed to printf to avoid GCC optimizing it into puts):
void main(void)
{
printf("Hello World! %s %d\n", CONFIG_BOARD, 12);
}
FLASH SRAM
minimal 8696 3952
picolibc int 7600 3960
picolibc float 12304 3960
newlib-nano int 11696 4128
newlib-nano float 30516 4496
newlib 34800 6112
---
v2:
Include picolibc-tls.ld
v3:
Document usage in guides/c_library.rst and
getting_started/toolchain_other_x_compilers.rst
v4:
Lost the lib/libc/picolibc directory somehow!
v5:
Add PICOLIBC_ALIGNED_HEAP_SIZE configuration option.
Delete PICOLIBC_SEMIHOST option support code
v6:
Don't allocate static RAM for TLS values; TLS
values only need to be allocated for each thread.
v7:
Use arm coprocessor for TLS pointer storage where supported for
compatibility with the -mtp=cp15 compiler option (or when the
target cpu type selects this option)
Add a bunch of tests
Round TLS segment up to stack alignment so that overall stack
remains correctly aligned
Add aarch64 support
Rebase to upstream head
v8:
Share NEWLIB, NEWLIB_NANO and PICOLIBC library configuration
variables in a single LIBC_PARTITIONS variable instead of
having separate PICOLIBC_PART and NEWLIB_PART variables.
v9:
Update docs to reference pending sdk-ng support for picolibc
v10:
Support memory protection by creating a partition for
picolibc shared data and any pre-defined picolibc heap.
v11:
Fix formatting in arch/arm/core/aarch64/switch.S
v12:
Remove TLS support from this patch now that TLS is upstream
Require THREAD_LOCAL_STORAGE when using PICOLIBC for architectures
that support it.
v13:
Merge errno changes as they're only needed for picolibc.
Adapt cmake changes suggested by Torsten Tejlmand Rasmussen
v14:
Update to picolibc 1.7 and newer (new stdin/stdout/stderr ABI)
v15:
Respond to comments from dcpleung:
* switch kernel/errno to use CONFIG_LIBC_ERRNO instead of
CONFIG_PICOLIBC
* Add comment to test/lib/sprintf as to why the %n test
was disabled for picolibc.
v16:
Switch picolibc to a module built with Zephyr. This eliminates
toolchain dependencies and allows compiler settings for Zephyr
to also be applied to picolibc.
v17:
Provide Zephyr-specific 'abort' implementation.
Support systems with MMU
v18:
Allow use of toolchain picolibc version.
v19:
Use zephyr/ for zephyr headers
v20:
Add locking
Use explicit commit for picolibc module
v21:
Create PICOLIBC_SUPPORTED config param. Set on arc, arm, arm64,
mips and riscv architectures.
Signed-off-by: Keith Packard <keithp@keithp.com>
Updates hal_espressif's revision to include:
- latest pinctrl definitions.
- support for building ESP32C3 USB driver
Signed-off-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
