Although it is possible to simply use the interface number,
it has proven convenient to use the names for the interfaces
in the samples.
Migrate to DEVICE_DT_NAME().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Those files do not contain anything of relevance since
fa90b5c243 [emul: spi: bmi160: Move to
top-level directory].
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Adding configuration to run the watchdog sample application
on the stm32 boards through 2 common overlay files:
one for running on the IWDG one for WWDG, if compatible.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add I2C based LED devices to led/app.overlay to get those associated
drivers enabled as part of the build test.
Signed-off-by: Kumar Gala <galak@kernel.org>
Having the LED device enabled in devicetree will now get the driver
enabled by default when CONFIG_LED=y is set. So we can remove
setting driver enabling Kconfig values in various .conf files.
Signed-off-by: Kumar Gala <galak@kernel.org>
* Utilize DT_HAS_<COMPAT>_ENABLED for devicetree based drivers
* Move to using select I2C' instead of 'depends on'
(see commit df81fef944 for
more details)
Signed-off-by: Kumar Gala <galak@kernel.org>
STM32h7 pllout frequency calculation overflows. In the
worst case pllsrc_freq can be 50Mhz and plln_mul 512 which will cause
an overflow of the intermediate result which leads to wrong frequency
returned. As no intermediate result can be bigger than 960MHz only the
order of operations is changed.
Signed-off-by: Benjamin Bigler <benjamin.bigler@securiton.ch>
This commit adds the `no_strict_aliasing` flag, which disables
the strict aliasing rule, for the ARC MetaWare compiler.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds the `no_strict_aliasing` flag, which disables
the strict aliasing rule, for the GCC compiler and its derivatives.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a template for specifying the C/C++ compiler flag for
disabling the strict aliasing rule.
It also enables this flag globally because the Zephyr codebase does not
strictly adhere to the aliasing rules specified by the C/C++ standards
and the optimisation strategies that assume these rules may end up
generating invalid code.
For instance, GCC 11 and above tend to optimise more aggressively
assuming the strict adherence to the standard aliasing rules and may
generate invalid code, when compiling Zephyr with `-fstrict-aliasing`,
that results in various run-time failures.
Note that the footprint and performance ramifications of disabling the
strict aliasing rule are negligible.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Change increases long workqueue stack size to prevent stack
overflows while processing GATT database hash.
CONFIG_BT_HCI_ECC_STACK_SIZE is removed, because the configured
stack was removed.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change disables BMI270 sensor in board DTS. The BMI270 sensor
driver in Zephyr does not support sensor connected over SPI.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add duration stats at both suite level and unit test
level into test summary. The duration is at second
level. Since the new ztest fx can execute a test suite
for multiple times, the worst/longest test duration is
collected.
Note that even a skipped test can have a duration greater
than 0 because the skip operation itself is not free.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Previously, unit test duration is collected within the
TC_START and Z_TC_END_RESULT macros. With existing tests,
the TC_START macro can be invoked by both the ztest fx
and the tests themselves. And the TC_START macro definition
went lengths to avoid the interference when it is invoked
within a unit test. This commit decouple the time collection
and the TC_STRAT/Z_TC_END_RESULT macros to fix this issue.
Now only the (old) ztest framework is responsible for the
test duration measure. The test duration stats of new ztest
fx is different from this btw.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Add test summary after all test suites finish running.
The summary can be one-line or verbose, which is configured
with CONFIG_ZTEST_VERBOSE_SUMMARY. The one-line summary covers
overall suite stats. The verbose summary covers each test
function within the suite besides the one-line summary.
The new ztest output ultimately go through the printk. If
printk go through the logging subsystem, there may be log
messages dropped. And if log_panic is invoked, log messages
can be flushed in a mess. So several explicit log flush
are used when printing summary to ensure no content is lost
and content is in good shape.
Some macros are shared between old and new ztests. Such as
TC_START_PRINT and TC_END_PRINT. The are defined accordingly.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Support verbose or one-line summary at test suite level.
Support verbose or no output at test function level.
Totally 4 combinations configurable:
- function verbose + suite verbose
- function verbose + suite oneline
- no function output + suite verbose
- no function output + suite oneline
Signed-off-by: Ming Shao <ming.shao@intel.com>
The current atmel sam flash driver was develop based on the cortex-m7
version of smart arm microcontroller. The driver support write
protection and cache functions which is not supported by other cortex-m
variants. This fixes current driver implementation and devicetree
entries for all sam variants.
Notes:
* The cortex-m3 doesn't have support erase pages flash command and
because of that the driver still not not compatible. Keep it disabled
until a patch be send. The hwinfo driver is not affected by this
restriction.
* The sam4l variation requires a specific driver because uses another
flash controller (flashcalw). Added another compatible to
differentiate and keeped node disabled until a driver be available.
Fixes#48516
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
When searching for a certain group of Kconfig options, e.g. CONFIG_BT*
it may be useful to view more than 10 options at the same time. This
patch adds a new combo box that allows to increase the number of results
per page (10, 25 or 50).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If the architecture has TLS support, but the toolchain doesn't, then
don't enable Zephyr TLS support when selecting picolibc.
Closes: #47275.
Signed-off-by: Keith Packard <keithp@keithp.com>
cleaned up some code in 3 mcux entropy drivers,
removing unnecessary void casts and function declarations
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
When the heap is of a fixed size and there isn't a special malloc partition
in use, place the heap in uninitialized memory so that the application
doesn't spend time at startup erasing it. Picolibc malloc always clears
memory before returning it to applications, so this change will not be
visible to applications.
Signed-off-by: Keith Packard <keithp@keithp.com>
Change fixes value returned by db_hash_commit. Returning positive
value leads to settings load failure.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Set the uart console as default on up_squared board. Currently
most of tests work well when the EFI console feature. But we
need test coverage on uart console fisrt.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
There is a spinlock used in the EFI console code for printing
one line string. It already made the log output being in order
under multi-cores, so it doesn't need a printk sync spinlock
again. Disable it while using EFI console as a log backend.
Fixes#47512.
Signed-off-by: Enjia Mai <enjia.mai@intel.com>
Because the fixup files do not exist anymore, stop using "unfixed"
naming in favor of "generated".
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Devicetree fixup files existed previous to the current stable Devicetree
API. While they served their purpose, they are no longer necessary nor
used in-tree. This patch drops support for this legacy feature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
dts.fixup was a thing before dts_fixup.h existed. Remove the check as we
have already moved away from dts_fixup.h.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Client Registration update process may be reject by server
and this commit fix a case that it will jump to new state
which send registration message. Earlier RD client try
allocate message before only possible one was released.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Queue mode without TLS cache was loosing buffered messages at
wake-up process from idle state. Now client context linked list
are initialized at rd client start process only 1 time.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Increase stack size for test thread. With no optimization
default stack size may not be enough.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Increase timer timeout. 5ms timeout was too short for some
devices (e.g. with slow and blocking uart output).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is a bug fix. A pointer to the spi configuration is not saved when
the spi driver is configured for slave operation and it can lead to
runtime errors.
Signed-off-by: Bryce Wilkins <bryce.wilkins@gmail.com>
() Fix the compatible string from "intel,dai,dmic" to
"intel,dai-dmic".
() Also rename the yaml file to have vendor name first.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
