Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Close the flash_area at the end of individual tests to demonstrate
correct usage of the API.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove all usage of `device_get_binding` in the subsys by directly
storing the `const struct device*` in the `struct flash_area`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This test uses SoC's flash from offset of 64 KB which might
overlap with executable for a target
(for instance nrf52840dk_nrf52840).
This patch moves this region to 128 KB which solves the issue.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert remaining tests and samples to using find_package() instead of
literally including the CMake boilerplate code.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Get flash device from flash area instead of the hardcoded
DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL. This makes the test
possible to be ran on device that has image_1 defined in
external flash.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
CONFIG_DEBUG_OPTIMIZATIONS should not be enabled by default in
prj.conf for tests or samples. Remove it from a few places that it
is.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the code responsible for aligning the flash write by writing fill
values - from stream_flash_buffered_write to flash_sync. This avoids
having to correct buf_bytes/buf_written after the write and thus
simplifies error handling.
This commit also fixes an issue where the write length passed to the
callback in flash_sync includes the fill length.
Signed-off-by: Jonathan Nilsen <Jonathan.Nilsen@nordicsemi.no>
Add additional API to stream_flash that can be used to make
stream write progress persistent using the settings subsystem.
This functionality makes it possible to resume a write operation
after it was interrupted, e.g. by power loss.
Signed-off-by: Jonathan Nilsen <Jonathan.Nilsen@nordicsemi.no>
The stream_flash_buffered_write, when invoked to do flush write, will
attempt to write the tail bytes from the buffer, filling the required
minimal write block size with erase value bytes; after write it rewinds
the buffer offset, bytes_written, by number of the "filler bytes".
Doe to lack of return code processing from flash_sync call, two things
would happen to context in case of failure:
1) the ctx->bytes_written would be rewind pass the value it had before
function call as it gets decremented by "filler bytes" even if write
failed;
2) the ctx->buf_bytes offset would be accounting for added "filler
bytes" which should not be counted as data in buffer.
Proper processing of return code has been added to remove effects
described above.
Unit tests have been expended to cover the scenarios.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The flash_sync function is able to call, if specified, write
verification callback to check whether data flash has been correctly
written to a flash. Part of that procedure is to read date back of
the flash and call the verification callback on the buffer;
in case if the read would fail, the flash_sync would return,
with an error code, without updating stream_flash_ctx.
The same logic should be applied to failed verification, but, due to
missing return, the stream_flash_ctx gets updated with probably
incorrectly written bytes added to total bytes_written and buf_bytes,
representing number of bytes awaiting in buffer, being zeroed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The stream_flash_erase_page would update stream_flash_ctx member
last_erased_page_start_offset, to page offset it attempted to erase,
even if such operation failed.
The commit changes this behaviour so that in case of failure the
last_erased_page_start_offset would still hold previously, successfully,
erase page offset.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Added flash_area_erased_val() function for get value of erased
byte of memory which is under flash area.
This function already exist in MCUBoot and zephyr dfu subsystem
which makes simultaneous usage of both impossible.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add SHA-256 flash integrity method. It reads flash data from a
device giving an offset creating a SHA-256 hash to be compared
with a reference. On sucess match, zero is returned, otherwise
a negative errno value.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is done to support the idiomatic way of performing flush
operations, where the caller might not have access to the proper data
pointer. Also, there is no reason why reading from address 0 should
not be allowed.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Added test for check proper service of flush-write when buffer
contains unaligned amount of data.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This library supports stream writes to flash with
optinal progressive erase.
This module is a direct copy of the functionality found in
subsys/dfu/img_util/flash_img.c
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The board name for the nRF52 DK, so far known as nrf52_pca10040, is
renamed to nrf52dk_nrf52832. Its documentation and all references
to its name in the tree are updated accordingly. Overlay and
configuration files specific to this board are also renamed, to
match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
We rename the nRF51 Dev Kit board target (nrf51_pca10028)
to nrf51dk_nrf51422. We update all associated references
in the supportive documentation and all nRF51-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash.h to drivers/flash.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move flash_map.h to storage/flash_map.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
On boards that have the arm or nxp mpu, configure the mpu to allow flash
writes. Otherwise this test will fail with an mpu fault.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
