Disable unstable tests cases for mps2_an385, which fail sporadically
due to timer stability issues on that platform (see #48608).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Loosen some timing constraints in order to hack arond spurious
failures in upstream Zephyr's CI while working on an unrelated task.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit disables the `net.socket.tcp.preempt` test on the
`mps2_an385` platform because it fails very frequently due to the
system timer stability issues.
For more details, refer to the issue zephyrproject-rtos/zephyr#48608.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Apply an exponentially increasing wait time between tcp retries. This
is a good balance between reacting fast to single lost packets and reduce
the network load when an outage takes a little longer. It also allows the
connection to survive a longer interruption with less retransmissions.
Update the test to accommodate for the increased socket closure timeout
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Previously the test waited for the worst case time till all sockets
where closed, this causes the test to wait for a long unnecessary time.
Secondly it does not ensure the sockets are actually closed before
starting the next tests.
For tests that are not conducted in user mode, wait until all the contexts
are close for a maximum time. If the contexts are not closed in time raise
an explicit assertion.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A reproducible case to the behavior when during a connection
the link gets broken and all data is lost, the TCP connection
should properly terminate.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When there is no response from the server, a client side close
is obstructed, it should terminate and clean the context. This
tests breaks the connection after the accept and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Add a wait at the end of the test so we are sure all sockets have
been closed before the next test starts.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
The close function on a TCP socket can return before the complete
socket has been closed, as there might be packets still in flight.
Modify the test to wait briefly (less then the retransmit time), before
counting the number of still open net_contexts. This makes the test
outcome not dependent on the scheduling order of the different tasks.
Secondly the test actually checks the number of open contexts to be zero
so there is no need to wait for any open contexts to still close.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
When there is no response from the server, a client side connect
should return a ETIMEOUT. This tests breaks the connection and validates
this behavior.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
A reproducible case to see what happens when the TCP stack runs out
of buffers. It transfers a block, bigger then the number of buffers
available.
Also test by introducing packet loss in the loopback driver.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Since the loopback driver makes use of the RX packet pool now, adjust
the packet count for the test.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
../src/main.c:662:13: warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]
662 | int sock = (int)p1;
| ^
../src/main.c: In function 'spawn_child':
../src/main.c:671:4: warning: cast to pointer from integer of different
size [-Wint-to-pointer-cast]
671 | (void *)sock, NULL, NULL, 0, K_USER,
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Adjust the test thread priority so that the test / IP stack
has a chance to run and the test passes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
A socket which didn't undergo completed connect() or accept() calls
should react with ENOTCONN to recv() call. This test checks both
a freshly created socket ("client" one) and a socket in LISTEN
state ("server").
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is bad practice and may conceal issues on platforms
not in the whitelist.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Unlike CONFIG_HW_STACK_PROTECTION, which greatly helps
expose stack overflows in test code, activating
userspace without putting threads in user mode is of
very limited value.
Now CONFIG_TEST_USERSPACE is off by default. Any test
which puts threads in user mode will need to set
CONFIG_TEST_USERSPACE.
This should greatly increase sanitycheck build times
as there is non-trivial build time overhead to
enabling this feature. This also allows some tests
which failed the build on RAM-constrained platforms
to compile properly.
tests/drivers/build_all is a special case; it doesn't
put threads in user mode, but we want to ensure all
the syscall handlers compile properly.
Fixes: #15103 (and probably others)
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This lets us quickly filter tests that exercise userspace
when developing it.
Some tests had a whitelist with qemu_cortex_m3; change
this to mps2_an385, which is the QEMU target with an
MPU enabled.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If peer socket closed, the other side should get 0 from recv(), and
should get in stable manner (no matter how much time went from the
closure and/or how many times recv() is called).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The idea is that we should have many, many tests. The only reasonable
way to achieve that is by making tests easy and pleasant to write,
and that requires common, easy to reuse infrastructure.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove network specific default and max log level setting
and start to use the zephyr logging values for those.
Remove LOG_MODULE_REGISTER() from net_core.h and place the
calls into .c files. This is done in order to avoid weird
compiler errors in some cases and to make the code look similar
as other subsystems.
Fixes#11343Fixes#11659
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
