Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
All IEEE 802.15.4 tests use internal fake devices, so use native_posix
platform to run them as they are not meant to test IEEE 802.15.4 on
hardware.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Disable unstable tests cases for mps2_an385, which fail sporadically
due to timer stability issues on that platform (see #48608).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Loosen some timing constraints in order to hack arond spurious
failures in upstream Zephyr's CI while working on an unrelated task.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
6LoWPAN fragmentation is not related to IEEE 802.15.4 proper but is just
part of its IPv6-specific L3-adaptation layer. To make this more obvious
we rename all resources related to 6LoWPAN fragmentation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change decouples the IEEE 802.15.4 (L2) layer from all IPv6 (L3)
concerns.
Applications may now choose to set CONFIG_NET_6LO=n and
CONFIG_NET_L2_IEEE802154=y at the same time.
Setting CONFIG_NET_6LO=n will build a vanilla IEEE 802.15.4-2006 specs
compliant L2 layer without any reference to 6LoWPAN or IPv6. This allows
application developers to design custom non-IP protocols on top of
IEEE 802.15.4-2006 and thereby makes the L2 layer much more re-usable.
Fixes#48585.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The crypto driver is used internally, so there's no real need to expose
its name as a Kconfig option. Just drop it in favor of a plain string
with the same previous value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC1200_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
In this case, the driver already had bindings, however, it was still
using NET_DEVICE_INIT.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit disables the `net.socket.tcp.preempt` test on the
`mps2_an385` platform because it fails very frequently due to the
system timer stability issues.
For more details, refer to the issue zephyrproject-rtos/zephyr#48608.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
It can happen that two similar stacks enter a retransmission cycle
due to a packet collision. If the transmission timeout is the same
both stacks will retry at the same moment resulting in another
collision.
By introducing a randomized retry timeout, the chance of
a second collision is reduced and it reduces furter the more
retransmissions occur.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Apply an exponentially increasing wait time between tcp retries. This
is a good balance between reacting fast to single lost packets and reduce
the network load when an outage takes a little longer. It also allows the
connection to survive a longer interruption with less retransmissions.
Update the test to accommodate for the increased socket closure timeout
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Previously the test waited for the worst case time till all sockets
where closed, this causes the test to wait for a long unnecessary time.
Secondly it does not ensure the sockets are actually closed before
starting the next tests.
For tests that are not conducted in user mode, wait until all the contexts
are close for a maximum time. If the contexts are not closed in time raise
an explicit assertion.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Move af_packet_ipproto_raw tests to use new ztest API
TEST=twister -T tests/net/socket/af_packet_ipproto_raw/
Signed-off-by: Hu Zhenyu <zhenyu.hu@intel.com>
Move driver to use {NET_}DEVICE_DT_INST_DEFINE. This lets us
remove the IEEE802154_CC2520_DRV_NAME Kconfig symobl.
We also update the ieee802154 build_all test to actually enable
the CC2520 driver.
Signed-off-by: Kumar Gala <galak@kernel.org>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
