Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Linker files were not migrated with the new <zephyr/...> prefix. Note
that the conversion has been scripted, refer to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The autoconf.h header is not required because the definitions present in
the file are exposed using the compiler `-imacros` flag.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When operating on different kinds of heaps sometimes there's a need to
perform special operations on heap, poweroff memory bank when releasing
memory etc. Therefore some additional data may be required.
Metadata is a point to keep such data.
Signed-off-by: Marcin Szkudlinski <marcin.szkudlinski@intel.com>
Both alloc_pending tests requires the main thread to utilize
the heap so that child threads must pend on memory allocations.
However, the previous implementation was not SMP friendly where
the child threads could run and succeeded in memory allocation
on other CPUs while the main thread continued to allocate
memory. The main thread would fail to allocate memory if
the child thread (on other CPU) has not freed the memory yet.
Not to mention that, in this scenario, the child thread was not
pending on memory allocation which defeated the purpose of
the test. So to fix this, make sure the main thread allocates
enough memory so future allocations must go into pending.
Also, check that the child thread cannot allocation memory
when first entered so it is actually going into pending.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The shared multi-heap memory pool manager uses the multi-heap allocator
to manage a set of reserved memory regions with different capabilities /
attributes (cacheable, non-cacheable, etc...) defined in the DT.
The user can request allocation from the shared pool specifying the
capability / attribute of interest for the memory (cacheable /
non-cacheable memory, etc...)
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a simple coverage test for the multi_heap utility, validating all
cases with a simple configuration value that specifies an index in an
array of heaps.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit adds an additional test case for several kernel test suites
to ensure that the linker script generator is working correctly for a
subset of the Zephyr test suites.
The ensures that the basic functionality of the linker script generator
is working while still keep the performance impact on CI at a minimal
level.
Using the kernel tests is a trade-off between testing coverage of the
linker script generator and the time it takes to complete CI.
The kernel tests is considered to have the broadest coverage of various
features important for the generated linker script.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add test to statically allocate a minimum-size heap, verify that it
works to allocate a single byte and that it doesn't overrun its memory
bounds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
in test case test_mheap_threadsafe, we will create 3 threads using
same thread handler tmheap_handler, we should make thread_id
to be a local variable, otherwise tmheap_handler is non-reentrant.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Extended mheap_api_concept test suite to support case when
multithreading is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This is an intergration testcase for mem_heap.
Add an testcase to verify that multiple threads
can share the same heap space without interfering
with each other.
Signed-off-by: Ying ming <mingx.ying@intel.com>
These two test cases were making whitebox assumptions of both the
block header size and memory layout of an old-style k_mem_pool that
aren't honored by the k_heap allocator. They aren't testing anything
that isn't covered elsewhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These were implemented in terms of the mem_pool/block API directly
(for complicated reasons, the pointers returned from this API may have
been allocated from allocators other than the single system heap).
Have them use a k_heap instead.
Requires a tweak to one test which had hard-coded an assumption about
the header size.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove the MEM_POOL_HEAP_BACKEND kconfig, treating it as true always.
Now the legacy mem_pool cannot be enabled and all usage uses the
k_heap/sys_heap backend.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Instead of replacing of copyright year with the new one,
necessary to add new to the existing one
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Updated current tests tags to make them more informative.
1. test_mslab updated Doxygen tag
2. test_create_alt_thread updated Doxygen tag
3. test_sys_heap_mem_pool_assign updated Doxygen tag
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
These five tests (mbox_api, mheap_api_concept, msgq_api, pipe_api and
queue) all had test cases where they needed a mem_pool allocation to
FAIL. And they are all written to assume the behavior of the original
allocator and not the more general k_heap code, which actually
succeeds in a bunch of these cases.
* Even a very small heap saves enough metadata memory for the very
small minimum block size, and this can be re-used as an allocation.
So you can't assume a small heap is full.
* Calculating the number of blocks based on "num_blocks * max size /
minimum size" and allocating them does not fill the heap, because
the conservative metadata reservation leaves some space left over.
So these have all been modified to "fill" a heap by iteratively
allocating until failure.
Also, this fixes a benign overrun bug in mbox. The test code would
insert a "big" message by reading past the end of the small message
buffer. This didn't fail because it happened to be part of an array
of messages and the other ones defined contained the memory read. But
still.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The accounting data stored at the beginning of a memory block used by
malloc must push the returned memory address to a word boundary. This
is already the case on 32-bit systems, but not on 64-bit systems where
e.g. struct k_mem_block_id still has a size of 4.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move to latest cmake version with many bug fixes and enhancements.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming every project "NONE"
defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names in the samples (and again, in
the tests folder) folder, small manual adjustments have been done.
Signed-off-by: Reto Schneider <code@reto-schneider.ch>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add description to test cases in tests/kernel/mem_heap,
tests/kernel/mem_slab and tests/kernel/mem_pool
Signed-off-by: Spoorthi K <spoorthi.k@intel.com>
Remove unstructured and unused doxygen groups for tests. We will now add
doxygen comments per test function and follow a more structured
grouping.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing CMake is an important step in a larger effort to make
Zephyr easy to use for application developers working on different
platforms with different development environment needs.
Simplified, this change retains Kconfig as-is, and replaces all
Makefiles with CMakeLists.txt. The DSL-like Make language that KBuild
offers is replaced by a set of CMake extentions. These extentions have
either provided simple one-to-one translations of KBuild features or
introduced new concepts that replace KBuild concepts.
This is a breaking change for existing test infrastructure and build
scripts that are maintained out-of-tree. But for FW itself, no porting
should be necessary.
For users that just want to continue their work with minimal
disruption the following should suffice:
Install CMake 3.8.2+
Port any out-of-tree Makefiles to CMake.
Learn the absolute minimum about the new command line interface:
$ cd samples/hello_world
$ mkdir build && cd build
$ cmake -DBOARD=nrf52_pca10040 ..
$ cd build
$ make
PR: zephyrproject-rtos#4692
docs: http://docs.zephyrproject.org/getting_started/getting_started.html
Signed-off-by: Sebastian Boe <sebastian.boe@nordicsemi.no>
