When there is no external pull-up on the CSN line and the line
is put into the low-power mode (input direction and disconnected
buffer), after some time its level falls to low and some flash
chips, like for example MX25R64, exit the Deep Power-down mode
when that happens. To prevent this, activate the GPIO internal
pull-up for this line in boards that do not have the external
pull-up on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The SPI flash were recently changed to use an alias to identify the
flash chip in:
64fbbd9a44 boards: Add alias to boards with spi-flash node
This caused some CI test failure for the nrf52840dk test with the
nrf52840dk_mx25l51245g overlay, as it changes the flash nodelabel of the
board dts file. Adding the correct alias to the overlay file to point to
the correct one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
- The MX25UM51345G flash is connected to FLEXSPI PortA for
mimxrt595_evk.
- Updated flexspi_mx25um51345g driver to support DTR OPI mode.
- Tested with tests/drivers/flash.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There was mistake in parentheses application in
the expression which calculates the value.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The `size` property is expressed in `bits` unit.
The value should be calculated as bits to bytes conversion.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added overlay with DTS of MX25L51245G qspi flash
memory. DTS configures qspi clock to 2 MHz which is supported
by nRF52840.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
If a user has a 1GB external flash it is currently not possible
to configure this through DTS. To allow for such a configuration
we add an option which specifies the size in bytes not bits.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Restore the testcase to run on the qspi nor-flash controller
of the disco_l475_iot1 board
of the disco stm32f746 board
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
drivers.flash.nrf_qspi_nor and drivers.flash.soc_flash_nrf:
keep nrf52840dk_nrf52840 as integration_platform
drivers.flash.default:
Use mimxrt1060_evk instead as integration_platform,
this is the only platform allowed.
drivers.flash.stm32:
Add a bunch of boards as integration_platforms for
this test configuration.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit enables soc-flash support in disco_l475_iot1
only for flash test. Using overlays, it adds soc-flash storage
partition and deletes qspi-flash storage parition for
flash test. Both flash test and spi_flash application
has been tested on disco_l475_iot1 platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables soc-flash support in stm32f746g_disco only for
flash test. Using overlays, it adds soc-flash storage partition and
deletes qspi-flash storage partition for flash test. Both flash test and
spi_flash application has been tested on stm32f746g_disco platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This commit makes the flash test generic. The flast test will
look for storage partition in the soc-flash for testing.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Test include non-aligned read in nrf_qspi_nor flash and
SoC flash memory to buffer with variable size.
It checks all possible variants of alignment and size.
Signed-off-by: Mateusz Syc <Mateusz.Syc@nordicsemi.no>
