Now that ADC drivers are enabled based on devicetree
we need to remove any cases of them getting enabled by
Kconfig.defconfig* files as this can lead to errors.
Typically the Kconfig.defconfig* will blindly enable a
sensor and not respect the devicetree state of the ADC.
Additionally we can get problems with prj.conf/defconfig
getting incorrectly overridden.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The Seeed XIAO BLE is a tiny (21 mm x 17.5 mm) Nordic Semiconductor
nRF52840 ARM Cortex-M4F development board with onboard LEDs, USB port,
QSPI flash, battery charger, and range of I/O broken out into 14 pins.
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Move to use DEVICE_DT_GET instead of device_get_binding as we
work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
Changes:
- Copied over board files for blackpill_f401ce
- Changed appropriate soc dtsi from stm32f401Xe.dtsi to stm32f401Xc.dtsi
- Replaced any instance of F401CE to F401CC
- Added blackpill_401cc to adc test
In essense the blackpill_f401ce and blackpill_f401cc are the exact
same boards,
the f401cc variant of the stm32 mcu has lesser sram and flash than
the f401ce.
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
The test_adc.c still have hardcoded information on a board basis,
that need to be added manually.
Signed-off-by: Steffen Jahnke <steffen.jahnke@eu.panasonic.com>
This PR adds support for the RT1060_EVKB as a variant of the RT1060 EVK.
Blinky app tested locally on RT1060_EVKB.
Signed-off-by: Nickolas Lapp <nickolaslapp@gmail.com>
This commit adds support for EBYTE E73-TBB.
This board features Nordic nRF52832 chip.
It was tested with several samples such as blinky and buttons.
Signed-off-by: Michal morsisko <morsisko@gmail.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit adds support for the Arduino Nano 33 BLE Sense board.
The DTS is separated into a common dtsi and one DTS for each version
of the board. The sensors with existing drivers: hts221, lps22hb and
apds9960 are added to the DTS of the Sense version.
A startup delay is added to the vdd_env node. This is done to give some
time for the sensors VDD/VCC to go high before the sensor drivers are
initialized.
The functionality was verified using the driver sample of each sensor.
Signed-off-by: Benjamin Björnsson <benjamin.bjornsson@gmail.com>
This PR configures the test case to run the adc_api on the
b_u585i_iot02a disco board from STMicroelectonics.
Channel 15 is choosen
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The BT6x0 board configuration is only valid for the BT610 device,
therefore rename the boards file to BT610
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Enables ADC1 on the RT1020 evaluation board. Channels 10 and 11 of this
ADC are exposed as pins 1 and 2 of J18 on the evk.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables ADC on RT1015 evaluation board. Channels 1 and 13 are exposed as
pins 2 and 1 of J18 on the EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added ADC support to RT1010 evaluation board. ADC channels 1 and 2 are
exposed as pins 10 and 12 of J26.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Adds ADC support to RT1024 EVK. ADC channels 10 and 11 are enabled as
pins 2 and 4 on J18 of the evaluation board
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Enables the ADC on the RT1060 evaluation board. Channels 0 and 15 of
ADC1 are available on pins 1 and 0 of J23, respectively.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
add adc to board dts file,
update yaml files and documentation,
add adc 1 channel pins 1 and 15 to the pinmux file,
add overlay file to the board adc sample,
add board to the adc test file and
Signed-off-by: Andrei Auchynnikau <ovchinnikov@strim-tech.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
reuse the lpc's lpadc driver for rt1170, modify the dts and add
some macro to shield some code of LPC series. Also add the
board support inside the tests/drivers/adc/adc_api/src/test_adc.c,
and a dts node:zephyr,user inside
samples/drivers/adc/boards/mimxrt1170_evk_cm7.overlay
Signed-off-by: Crist Xu <crist.xu@nxp.com>
Introduce the npcx9m6f_evb board driver. NPCX9M6F_EVB board is a
development platform to evaluate the Nuvoton NPCX9 series
microcontrollers. This board needs to be mated with part number
NPCX996F.
It also includes:
1. Add CONFIG_BOARD_NPCX9M6F_EVB definition for adc test suite.
2. Add npcx7m6f_evb.overlay file for gpio test suite.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Modify support for u-blox BMD-345-EVAL which uses the nRF52840
and a Skyworks RFX2411 FEM.
These edits follow the naming cnoventions that is used
with the other u-blox EVKs recently added, or in progress
This board is similar to the nRF52840dk_nrf52840 with the
addition of a FEM. Four Arduino GPIO pins have been
reassigned to the PA_LNA control pins.
u-blox would prefer to use this naming convention to match
other BMD-3xx-EVAL and EVK-NINA-Bx boards recently submitted.
Tested with blinky, button, and Bluetooth peripheral_hr
Checking dts files
Updated CODEOWNERS to rename bmd_345_eval to ubx_bmd345eval_nrf52840
Added CMakeLists.txt, updated board.c
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
ADC emulator is designed to be used in tests on native_posix board. It
supports 1-16 bit resolution range and all GAINs from enum adc_gain.
Reference voltages and number of emulated channels are set through dts.
Using special API from drivers/adc/adc_emul.h it is possible to set
constant voltage value returned by given ADC channel or set custom
function which allows to simulate complex output.
Also reference voltages can be changed in runtime using the API.
The CL also includes:
- Add adc definitions of ADC emulator in
tests/drivers/adc/adc_api/src/test_adc.c for supporting test suites.
- Add test for ADC emulator API in tests/drivers/adc/adc_emul/
Signed-off-by: Tomasz Michalec <tm@semihalf.com>
Add support for u-blox EVK-NINA-B4, which uses the nRF52833
This board is similar to the nrf52833dk_nrf52833, though it
uses a u-blox NINA-B40x openCPU module with DC-DC support
included.
Simplified pwm LED aliases
Corrected LED assignments for red, green, and blue
Addressed review comments (spi & gpio 0 0)
Tested with blinky, button, and Bluetooth peripheral_hr
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox EVK-NINA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected duplicate pin assignment for i2c1 in dts file
Corrected copyright date in Kconfig.defconfig
Rebase to update test_adc.c
Corrected sda-pin, scl-pin assignments and LED aliases
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add support for u-blox EVK-ANNA-B1 which uses the nRF52832.
This board is similar to the nRF52dk_nrf52832 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Addressed review comments, including SW2
Rebased to pick up new board in test_adc.c - corrected typo
Reverted to sda-pin, scl-pin
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
Add rak4631 board from RAKWireless based on nrf52840 and SX1262.
Board Documentation is completed
Signed-off-by: Guillaume Paquet <guillaume.paquet@smile.fr>
Add support for u-blox EVK-NINA-B3 which uses the nRF52840.
This board is similar to the nRF52840dk_nrf52840 with
different pin assignments on the header pins and not having
the debug-in and shield SWD headers.
Tested with blinky, button, and Bluetooth peripheral_hr
Corrected permissions
Addressed review comments
Removed arduino_spi
Signed-off-by: Bob Recny <bob.recny@u-blox.com>
