Enabled Multiple Notifications and added command for
bt_gatt_notify_multiple().
Increased possible number of connections to execute GATT/SR/GAN/BV-02-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Mesh Profile Specification errata 11310
Section 4.4.4.1
"This model shall support model publication, as defined in Section
4.2.2 of the Mesh Profile specification and model subscription,
as defined in section 4.2.3 of the Mesh Profile specification."
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
A new command is added to connect EATT channels.
Affects L2CAP/TIM/BV-03-C, which tests requirements on ATT.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
ATT_READ_BY_TYPE_RSP returns Attribute Data List so handle it in the
application.
This affects GATT/CL/GAR/BV-03-C.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Don't autoconnect EATT as this was confusing PTS and resulted in
multiple tests failures. When needed PTS will connect EATT bearer.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Making sure struct bt_l2cap_chan has absolutely no members related
to dynamic channels.
That way we ensure that there is no overhead for a build where only
fixed channels are used.
It's not enough that the dynamic channel-related members are put behind
ifdefs - they should be completely moved out from the struct definition.
Furthermore, the public l2cap.h header file already has a struct
that's meant to be used for dynamic channels: struct bt_l2cap_le_chan!
However, currently dynamic channel support is a mess - it's a mix
between these two structs. The bt_l2cap_le_chan struct should really
be an extension of the bt_l2cap_chan struct, i.e. the former should
contain as a member the latter.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
autopts was updated to properly require support for Accept Filter List
in Auto Connection Establishment Procedure related tests. This patch
enabled support for it and adds required BTP support.
This was affecting following qualification test cases:
GAP/CONN/ACEP/BV-03-C
GAP/CONN/ACEP/BV-04-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This was affecting following qualification test cases:
GAP/SEC/SEM/BV-56-C
GAP/SEC/SEM/BV-57-C
GAP/SEC/SEM/BV-58-C
GAP/SEC/SEM/BV-59-C
GAP/SEC/SEM/BV-60-C
GAP/SEC/SEM/BV-61-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
We have single server but it can accept multiple connections so
keep same requirements for all connection attempts.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds preprocessor ifdefs to reconfigure() in L2CAP tester application
depending on the KConfig option CONFIG_BT_L2CAP_ECRED
Fixes issue #40456
Signed-off-by: Johan Lundin <johan.lundin@nordicsemi.no>
If IUT is acting as a central device and peer lost bond we need
to re-pair to restore bond. PTS is not sending any WID for this
so bonding needs to be initiated implicitly by IUT.
This was affecting GAP/SEC/AUT/BV-25-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Adds support for reading multiple variable length characteristics.
Previously read_multiple() always set the variable flag to false.
This is used by GATT/CL/GAT/BV-03-C.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
This allows to do directed advertising with peer address set to RPA.
To do this according to specification IUT must first read Central
Address Resolution characteristic to check if peer supports it.
This is affecting GAP/CONN/DCON/BV-05-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
bt_conn_unref() requires valid conn pointer but could be called with
NULL in case valid connection was not found in disconnect_eatt_chans().
Fixes#39851
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows to track security levels and check for lost bond of peer
peripherals.
This was affecting GAP/SEC/AUT/BV-21-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This allows for better control over IUT behaviour by Upper Tester.
PTS and TS require inconsistent behaviour in terms of how IUT should
return credits. Some tests require return on explicit UT request and
some require that IUT returns credits autonomously.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
In some scenarios when there is a need for multiple re-transmissions of
segmented messages the default value of 2 seconds may be not enough.
In my experience this improves stability of Configuration Client tests
involving multiple PTS instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
BTP change extended L2CAP_CONNECT command by ECFC flag, which determines
which connection procedure is used (non-enhanced or ecred). Now, only
this flag determines the procedure used, not number of requested
channels.
This was affecting L2CAP/ECFC/BV-25-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
To check security of connection in read_value() we need to actually
pass connection not NULL.
This is affecting GATT/SR/GAR/BI-11-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Removes all the dead ternary expressions in the mesh bluetooth tester.
Fixes#37983.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Some test cases require the IUT to respond with a certain error. To get
the stack to return this error to PTS the application needs to be
configured specifically for this test case.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
