VT100 commands are now stored as strings rather than character arrays.
This change will make it easier to create a unified macro for sending
all VT100 commands.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch fixes the issue that can cause a deadlock in shell.
When two threads simultaneously poll the TXDONE signal, only one
of them will receive it, leaving second one stalled.
The problem was that shell's context contains k_poll_event objects that
were polled by multiple threads. Polling it overwrites the poller field
that was set by previous thread.
Instead, the k_poll_event object must be created on the stack by every
thread that wants to poll the TXDONE signal.
This makes sure that no thread will be left waiting for this signal
forever.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
Problem:
In some cases, as described in: https://github.com/zephyrproject-rtos/zephyr/issues/36948
shell backend sends characters to output before serial device
is ready for it. It results in observing additional characters
inserted on the shell input after device boot.
Solution:
Added waiting on DTR signal before sending anything to the output.
Fixes: #36948
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
We get build issues due to the removal of the Kconfig symbol
CONFIG_UART_SHELL_ON_DEV_NAME on platforms that didn't have a uart
set as we'd get a default value for those platforms. Update the
Kconfig logic to only enable SHELL_BACKEND_SERIAL if we have
zephyr,shell-uart specified in the devicetree to address the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
This migrates all the current iterable section usages to the external
API, dropping the "Z_" prefix:
Z_ITERABLE_SECTION_ROM
Z_ITERABLE_SECTION_ROM_GC_ALLOWED
Z_ITERABLE_SECTION_RAM
Z_ITERABLE_SECTION_RAM_GC_ALLOWED
Z_STRUCT_SECTION_ITERABLE
Z_STRUCT_SECTION_ITERABLE_ALTERNATE
Z_STRUCT_SECTION_FOREACH
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The function to execute shell commands: shell_execute_cmd will now
behave similarly to invoking command line commands.
I.e. after the command is executed the command buffer is cleared,
while the cursor is set to the initial position.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Currently, in Zephyr the shell thread is the lowest priority i.e.
K_LOWEST_APPLICATION_THREAD_PRIO. Due to this all the other threads can
preempt the shell thread. Proposed solution is to add Kconfig which
gives the flexibility to change the priority of the shell thread.
This is now implemented using a new Kconfig variable
SHELL_THREAD_PRIORITY_OVERRIDE. By setting this option
SHELL_THREAD_PRIORITY can be set.
Signed-off-by: Uday Ammu <udaykiran@google.com>
All variables for address, width and value are unsigned, so use strtoul
instead of strtol. This fixes an issue when 0xffffffff is about to be
assigned to specific address, which was truncated to 0x7fffffff so far.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Added api call that can set a callback that is called whenever
data is received on shell. When callback is set, shell processing
is bypassed and data is passed to that callback.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Promote the "edac mem" shell subcommand to a generic "devmem" root shell
command. This command is useful for poking around registers and memory
outside of the EDAC drivers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
If the shell root command shall be set in the application, e.g. for
implementing a login scheme, it is an advantage to set this already
during shell init.
This is now implemented using a new Kconfig variable SHELL_CMD_ROOT.
Signed-off-by: Hans Wilmers <hans@wilmers.no>
Allow the user to disable VT100 commands to have a plain shell
without terminal emulation in order to avoid a lot of garbage
ASCII characters in shell output.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
The tabulator handler creates a single structure if it is handling
dynamic commands. If the currently processed dynamic command has a
dynamic subcommand they both share the same structure.
As a result tabulation operation may result in undefined behaviour.
As a solution, a new structure was introduced to keep subcommand
information.
Fixes#35926.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell log backend depends on logging being enabled. Lack of this
dependency leads to compilation failure when logging is disabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The commit adds Kconfig option to configure dummy shell buffer size.
Size of this buffer determines how mutch of command output will be
stored in buffer.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Allow time for the shell to successfully echo the reboot command input
before the reboot abruptly terminates it. n This can help external
systems that interact with the shell and require the reboot command's
echo to successfully complete to synchronise with the device.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/35325
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
When shell log backend was disabled fifo used only in
deferred mode was unconditionally flushed which lead to
errors in immediate mode where fifo was not present. On
the other hand, in case of LOG2_MODE_DEFERRED fifo (mpsc_pbuf)
was initialized in enable stage.
In order to clean things up, deferred v1 fifo flushing and
deferred v2 mpsc pbuf initialization were moved to fifo_reset
function which is called when shell log backend is enabled.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit increases the shell stack sizes when used with
OpenThread shell and the joiner to compensate for enlarged
MPU stack guard.
Signed-off-by: Piotr Szkotak <piotr.szkotak@nordicsemi.no>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When shell had too many pending log messages it was attempting to
drop expired messages and retrying to put the new message. There
was an assumption that enough messages are dropped and new message
can be put. It may not be the case if no message expired during
given time. Wrapped the operation in loop to continue until expired
message is freed and new message is enqueued.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
If the telnet client operates in a character mode, it may send
individual characters in packets. Such packets were dropped in the
telnet shell backend instead of being process by the shell engine.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace k_work_cancel_delayable() with k_work_cancel_delayable_sync()
to make sure that the submitted work becomes idle before accessing
sensitive data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Init function can be called multiple times (after each shell
reinitialization). It was missing reseting ring buffers and tx_busy
flag. When called once proper state of those variable where handled
by ram sections initialization.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Shell uninitialization is not synchronous, it is deferred to shell
thread so resources used by the shell (e.g. transport resource like
uart) cannot be used until it is completed. Added callback which
notifies when all resources are released and shell is uninitialized.
Callback is called from shell thread just before it is aborted.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add Z_SHELL_SET_FLAG_ATOMIC macro to use technique from
shell_process() to atomically set and return the previous
value.
Change all void z_flag_*_set() functions to bool z_flag_*_set()
and use macro to return previous value after setting.
Modify shell_process() to use this modified z_flag_processing_set()
function.
Reorder flags to keep last_nl on byte boundary.
Add public setters for insert_mode, echo, and mode_delete for
completeness.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Add flag to shell_flags to control echo as obscure
character (for passwords) or not. Add setter and getter
functions. Modify shell echo to use this flag if set.
Also add public setter for color mode and obscure mode.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
The clock/timer APIs are not application facing APIs, however, similar
to arch_ and a few other APIs they are available to implement drivers
and add support for new hardware and are documented and available to be
used outside of the clock/kernel subsystems.
Remove the leading z_ and provide them as clock_* APIs for someone
writing a new timer driver to use.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Building this file with CONFIG_COVERAGE=y and CONFIG_SHELL_LOG_BACKEND=n
fails on the llvm-clang compiler. Swapping the IS_ENABLED and
log_backend allows the compiler to optimize out the if block even with
coverage enabled.
Signed-off-by: Jeremy Bettis <jbettis@chromium.org>
Sometimes it is hard to tell which instance of a thread is which
in the printed list, based solely on the name (if present) and
the k_thread pointer, so also print the thread entry fn pointer.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
If a shell command is compiled out using SHELL_COND_CMD(),
a line for this command will still be printed but will
be blank. Change it so compiled out commands are not
listed as blank lines.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This functionality is is enabled by setting CONFIG_SHELL_GETOPT.
It is not active by default.
User can call following functions inside command handlers:
- shell_getopt - getopt function based on freebsd implementation
- shell_getopt_status_get - returns getopt status
Beware when getopt functionality is enabled shell will not parse
command handler to look for "-h" or "--help" options and print
help message automatically.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Shell will not "steal" by default "-h" and "--help" each time
help functions are enabled.
This change is necessary to implement and use the getopt library.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
This makes cbprintf_nano.c much closer to the standard printf and
therefore more useful. The following are now implemented:
- right justification for everything (only for numbers previously)
- precision value for numbers, chars and strings
- width/precision passed as arguments with *
- "unlimited" padding length
- lower/uppercase hex output
- the #, + and ' ' flags are supported
And the code was heavily reworked to reduce its size as much as
possible to mitigate the size growth. Still, the binary resulting
from cbprintf_nano.c is now between 10% and 20% bigger depending on
the architecture. This is still far smaller than cbprintf_complete.c
which remains about twice as big on average even without FP support.
Many unit tests that were skipped with CONFIG_CBPRINTF_NANO are now
enabled, and a few more were added for good measure.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The ASSERT order is backwards, where the shell->ctx is being accessed
before it is being checked as valid. Moving the check for the
shell->ctx to before the using it.
Signed-off-by: Dan Kalowsky <dkalowsky@amperecomputing.com>
Fix the order so that it reflects the actual initialization order,
rather than putting PRE_KERNEL initializations after APPLICATION.
Add SMP in the proper location.
Use the helper function to provide unique identifiers for "devices"
that don't have a device pointer (so don't have a name).
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Refactor the output of device list to use standard API to retrieve the
list of devices, and to always display a status rather than hiding
disabled/failed devices.
Add API to associate a distinct identifier with any "device" that does
not have a name.
Where a device has requires dependencies display the devices on which
it depends.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Function shell_root_cmd_find was only used in shell_utils.c file.
Hence it is changed to static and renamed to root_cmd_find.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the documantation with newly added configuration features.
Added information where to find minimal shell config file.
Added information how to activate particular features.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The help command is needed to list all available commands
when it is not possible to use the tab key.
Previously when build-in commands were deactivated command
help was not compiled as well.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Added IS_ENABLED(CONFIG_SHELL_CMDS_SELECT) to remove a dead code.
Added static inline function that returns pointer to the selected
command.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When history feature is not compiled in it makes no sense to
trim the command. In addition when history feature is not active the
shell will not call function history_put.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
When calculating the size of unused interrupt stacks on SMP,
the "unused" variable is not cleared between CPUs. So this
value keeps incrementing and does not reflect actual unused
size for CPUs other than the first one. So clear the "unused"
variable for each CPU.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reverts commit e812ee6c21.
This is the initial step towards replacing the core Zephyr formatting
infrastructure with a common functionally-complete solution.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The objects should be const-qualified for consistency with other uses,
including declarations in headers.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Default shell stack size is not always enough when used with
OpenThread. Increasing it to the found adequate value.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Fix a compilation error when shell help feature was not selected and
but shell help command was compiled.
Fixes: #29042
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
With only single RX buffer there is a high chance that such buffer will
not be processed before new bytes come in over UART. This is why it is
good to have at least two buffers, one which can be processed by SMP
layer, while another is being filled with new incoming bytes.
Add Kconfig option which allows to configure multiple buffers filled
with received UART SMP fragments. Use default value of 2, so we can
safely process already received frame in thread, while new fragment
comes in concurrently.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
So far there was a simple char array used as buffer, with additional
variable representing number of bytes already written into it. After
full frame was written, a boolean flag was simply set to notify thread
about being ready to be processed. There was however no mechanism
implemented to prevent new incoming bytes from overwriting such buffer
before (or during) being processed.
Use net_buf to store temporary frame. Define dedicated net_buf_pool,
from which such buffer will be allocated and freed after being
processed. This will prevent from reusing the same buffer before having
it fully processed (and returning once again to available buffer pool)
in shell thread.
Define also fifo that will store buffers that are ready to be
processed. This will be the mechanism for notifying thread about new
UART SMP fragments.
net_buf pool and k_fifo are used on purpose, keeping in mind their
additional overhead (mostly in RAM/ROM usage). This makes the code ready
for increasing number of buffers if needed. In this commit however we
stick with only 1 buffer, to keep minimal changes in processing flow.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
To get a list of all supported shell commands user must hit the TAB
button. It may be awkward on some terminal emulators. This change
enhances the help command in a way it will in addition print all
supported commands.
Fixes: #28785
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Functions shell_help_subcmd_print and shell_help_cmd_print
are more generic. Now they can operate on command passed as an
argument not hard coded active_cmd.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Commit 770f232a67 removes an array
termination from the shell_make_argv function. This function was
called from two functions: execute and tab_handle. In the mentioned
commit termination was added only in the execute function.
As a result calling tab_handle function was causing a segmentation
fault. This fix adds array termination to the tab_handle function.
Fixes#28434
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
Closes: #28331
Configurable initialization priority is useful when using CDC ACM
serial device, for example.
Signed-off-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@nordicsemi.no>
Shell was accepting CONFIG_SHELL_ARGC_MAX+1 arguments which lead to
memory corruption and fault. Added error message reported when number
of provided arguments exceeds CONFIG_SHELL_ARGC_MAX.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This fix prevents a scenario when command callback calls shell_fprintf
after the shell cleared the command context flag and before setting
the prompt correctly.
Fixes#27522
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordisemi.no>
shell_fprintf requires that formatted output be emitted with a
putchar()-like output function. Newlib does not provide such a
capability. Zephyr provides two solutions: z_prf() which is part of
minimal libc and handles floating point formatting, and z_vprintk()
which is core and does not support floating point.
Move z_prf() out of minimal libc into the core lib area, and use it
unconditionally in the shell.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The smp_shell_rx_byte has been renamed to smp_shell_rx_bytes and now
accepts data buffer pointer and its size as parameters. Return value
has been changed to size_t and represents number of bytes processed from
the given buffer.
The change has been done to more efficiently serve most common scenario
when the function is called in loop to process buffer, byte by byte.
Previously such operation required passing each byte separately,
with the change the function will work directly on source buffer
reducing number of calls and byte copy operations.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
-Wimplicit-fallthrough=2 requires a fallthrough comment or a compiler
to tells gcc that this happens intentionally.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In case when SMP has been enabled, the shell_thread would be signaled
even if no data has been read from fifo.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
In case when shell ring buffer gets full the data may still be taken
from the UART fifo, byte by byte, and accepted by the SMP back-end,
if the back-end has been enabled.
Unfortunately the uart_rx_handle failed to check if it has been
successfull in reading a byte from the fifo, before passing it to
the SMP for processing, which could lead to processing random stack data
as a part of an SMP frame.
Additinally, when the SMP would have accepted the byte,
the uart_rx_handle would fail to signal shell_thread, that the SMP has
internally buffered data that could be processed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
So far SMP shell transport was initialized in APPLICATION run level, but
shell over UART was initialized in POST_KERNEL. This could end up in
situation when received frames were scheduled for further processing in
SMP layer, when it was not initialized yet.
Export smp_shell_init() function declaration and call it before shell is
initialized with all its receive data handlers. This prevents situation
when data is scheduled for processing in SMP layer, when that one is not
ready yet.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
