In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There is errata clarification (Errata ID:18700)
about subscriptions on fixed group addresses.
It is possible to subscribe models on non primary elements
on any fixed group address except all nodes address.
Devices should be able to receive messages on fixed addresses
even if they do not support the feature
to which the fixed group address belongs.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
Adds a Kconfig option for setting the Config Client and Health Client
timeout. Updates updates the default for Config Client to allow
reception of full sized message from a similar peer device at zero hops.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The previous PR was not fully baked, so this PR fixes issues by:
- Adding checks when dereferncing pointers stored in params.
- Clearing ack context if a return argument is NULL to not block and
wait for response.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
- Do not ignore unsolicited status messages to allow for the API to be
- used asynchronously
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
param can never be NULL here, so the check is redundant. Coverity is
complaining because param is accessed before the NULL check.
Fixes#37949.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
param can never be NULL, so this check is redundant. Coverity complains
about this, as the param variable is accessed before the check, which
would be wrong if param could be NULL.
Fixes#37948.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add missing API:
- Delete all group addresses in a SIG model's subscription list
- Update a network key
- Update an application key
- Get/Set Node Identity parameters
- Set virtual addtess for a SIG model
- Get/Set Key Refresh Procedures
Signed-off-by: Agata Ponitka <agata.ponitka@codecoup.pl>
According to spec we should ignore messages with incorrect msg size.
This patch adds a check to every opcode handler.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
```
3.7.3.4 Message error procedure
When receiving a message that is not understood by an element, it shall
ignore the message.
Note: A message can be falsely identified as a valid message, passing
the NetMIC and TransMIC authentication using a known network key and
application key even though that message was sent using different keys.
The decryption of that message using the wrong keys would result in a
message that is not understood by the element. The probability of such a
situation occurring is small but not insignificant.
A message that is not understood includes messages that have one or more
of the following conditions:
• The application opcode is unknown by the receiving element.
• The access message size for the application opcode is incorrect.
• The application parameters contain values that are currently
Prohibited.
Note: An element that sends an acknowledged message that is not
understood by a peer node will not receive any response message.
```
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Align the capitalization of the term "Bluetooth Mesh" to Bluetooth mesh"
in the documentation. This is done to to match the new updated naming
convention done in Bluetooth SIG. In the upcoming spec versions, it its
used "Bluetooth mesh" with the lower case convention.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The implementation of blocking calls is common for all the client
models.
This change reduces the code duplication by introducing new API that
helps to manage acknowledged messages.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds a parsing mechanism for Composition data page 0 in the Config
Client API, and uses it in the shell module to parse the incoming
composition data.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The first byte of the composition data status message is the returned
page index, not the status of the request. This is now reflected in the
API.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
The Configuration Client doesn't check the address in a received
response. This means that a response from any device will be accepted.
This change ensures that the correct response will be accepted.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Fix some format warning in cfg_cli.c.
Fix use CID_VNAL as param when use vendor models.
This is a resubmission of PR (#30086)
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Adds a cli_reset to mod_sub if no status response was requested. This
adds a non-blocking mode to the mod_sub calls, matching the behavior of
other cfg_cli functions.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Those APIs are used for deleting appkey, unbinding an application
from SIG model, unbinding an application from vendor model on the
target node, with matching shell command.
Signed-off-by: YanBiao Hao <haoyanbiao@126.com>
Adds a Config Client API for deleting netkeys on the target node, with
matching shell command.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Convert bluetooth mesh to using k_timeout struct. Many of the mesh
modules uses timeout calculations, so it is most practical to keep
the s32_t type and only initialize a k_timeout_t struct when
calling the kernel.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fixes bug where the config client's net_key_status handler would attempt
to pull two key indexes from a message which only holds one.
Fixes#24601.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
When Config client model send publish message, app_idx will
be need, however, currently code clear this value use `&`,
this will be generate error when app_idx not zero.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Make it possible to provision devices over advertising bearer (PB-ADV).
Many messages in the provisioning protocol are the same for provisioner
and device so much of the code could be reused by only changing when
they are expected to arrive.
This introduces to concept of local and remote device keys. The models
for cfg_cli and cfg_srv have been updated to reflect this concept. Both
the send and receive path in the transport layer have been updated to
support encrypting/decrypting with local and remote device keys.
When a node has been provisioned it is stored in bt_mesh_net.nodes. If
CONFIG_BT_SETTINGS is enabled, they are also saved to settings. If the
callback node_added in bt_mesh_prov has been set, it will be called for
every node that gets provisioned. This includes when they are retrieved
from settings.
The configuration CONFIG_BT_MESH_NODE_COUNT controls how many nodes that
can be provisioned.
Signed-off-by: Tobias Svehagen <tobias.svehagen@gmail.com>
Creates macros for determining model message lengths based on opcode,
payload length and MIC size. Also adds macro wrapping
NET_BUF_SIMPLE_DEFINE to serve the most common use case.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Adds a structure of callbacks for each model instance. This allows for
more flexible model implementations, that can interact with the Mesh
stack without going through the application.
For now, only an init callback is added, replacing the init mechanism in
the foundation models. The init callback does not provide the primary
flag that used to be in the foundation model callbacks, but replaces
this with an inline function in access.h.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
We've already got GATT services in subsys/bluetooth/services so
subsys/bluetooth/mesh is a more natural place. Aditionally this aims
to fix the Kconfig dependencies to be able to use mesh together with
BT_CUSTOM (i.e. a custom, potentially non-HCI, host stack).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
