Although it is possible to simply use the interface number,
it has proven convenient to use the names for the interfaces
in the samples.
Migrate to DEVICE_DT_NAME().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Those files do not contain anything of relevance since
fa90b5c243 [emul: spi: bmi160: Move to
top-level directory].
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Change increases long workqueue stack size to prevent stack
overflows while processing GATT database hash.
CONFIG_BT_HCI_ECC_STACK_SIZE is removed, because the configured
stack was removed.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add duration stats at both suite level and unit test
level into test summary. The duration is at second
level. Since the new ztest fx can execute a test suite
for multiple times, the worst/longest test duration is
collected.
Note that even a skipped test can have a duration greater
than 0 because the skip operation itself is not free.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Previously, unit test duration is collected within the
TC_START and Z_TC_END_RESULT macros. With existing tests,
the TC_START macro can be invoked by both the ztest fx
and the tests themselves. And the TC_START macro definition
went lengths to avoid the interference when it is invoked
within a unit test. This commit decouple the time collection
and the TC_STRAT/Z_TC_END_RESULT macros to fix this issue.
Now only the (old) ztest framework is responsible for the
test duration measure. The test duration stats of new ztest
fx is different from this btw.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Add test summary after all test suites finish running.
The summary can be one-line or verbose, which is configured
with CONFIG_ZTEST_VERBOSE_SUMMARY. The one-line summary covers
overall suite stats. The verbose summary covers each test
function within the suite besides the one-line summary.
The new ztest output ultimately go through the printk. If
printk go through the logging subsystem, there may be log
messages dropped. And if log_panic is invoked, log messages
can be flushed in a mess. So several explicit log flush
are used when printing summary to ensure no content is lost
and content is in good shape.
Some macros are shared between old and new ztests. Such as
TC_START_PRINT and TC_END_PRINT. The are defined accordingly.
Signed-off-by: Ming Shao <ming.shao@intel.com>
Support verbose or one-line summary at test suite level.
Support verbose or no output at test function level.
Totally 4 combinations configurable:
- function verbose + suite verbose
- function verbose + suite oneline
- no function output + suite verbose
- no function output + suite oneline
Signed-off-by: Ming Shao <ming.shao@intel.com>
Change fixes value returned by db_hash_commit. Returning positive
value leads to settings load failure.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Client Registration update process may be reject by server
and this commit fix a case that it will jump to new state
which send registration message. Earlier RD client try
allocate message before only possible one was released.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Queue mode without TLS cache was loosing buffered messages at
wake-up process from idle state. Now client context linked list
are initialized at rd client start process only 1 time.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Changing mkfs options from FM_FAT to FM_ANY so that on larger storage
FAT32 instead of FAT16 is automatically created.
Signed-off-by: Nahal Farhi <nahal@whisper.ai>
This commit adds the `CODE_UNREACHABLE` hint at the end of the
assertion failure branch so that the compiler takes note of the assert
function not returning when an assertion fails.
This prevents the compiler from generating misguided warnings assuming
the asserted execution paths.
It also introduces the `ASSERT_TEST` Kconfig symbol, which indicates
that the "assert test mode" is enabled. This symbol may be selected by
the tests that require the assert post action function to return
without aborting so that the test can proceed.
Note that the `CODE_UNREACHABLE` hint is specified only when the assert
test mode is disabled in order to prevent the tests from crashing when
the assert post action function returns.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Change introduces authentication callbacks used only for specified
BLE connection. The feature can be used by devices that require
reporting specific bonding capabilities only when pairing using
vendor-specific procedures.
If per-connection authentication callbacks are defined for given
connection, they are used instead of global authentication
callbacks. SMP latches authentication callbacks during the first
access to prevent updating the callbacks while pairing.
Fixes: #38336
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Add `OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE` to Kconfig.
Also set the number of children to minumum possible for MTD builds
in order to save some resources (~512B of RAM).
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use DT choice zephyr,ieee802154 as CONFIG_NET_CONFIG_IEEE802154_DEV_NAME
is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to make the zperf to work regardless of the POSIX configuration
in the system, convert the socket API usage into Zephyr's native
zsock_* API.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make a library out of the zperf shell sample. This makes to enable the
module in any application, not only the dedicated sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
ppp_send_pkt() function can be called with NULL fsm parameter (when
PPP_PROTOCOL_REJ packet was sent), howerver this was not taken into
consideration when ppp_context was retrieved. In result, this could lead
to NULL pointer dereference an crash.
Fix this, by moving the ppp_context extraction directly where it's
actually used (PPP_CODE_REJ packet type handling). In such case, fsm
point should not be NULL.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Updates the ztest_test_fail() function to allow failures in setup.
When executed, a failed assert will fail every test in the suite owning
the setup function. This was verified by adding a suite which asserts
in the setup function and has a test that should pass. During
exeuction, ztest marks the test as failing.
In order to verify exection I also added 2 new APIs:
- ZTEST_EXPECT_FAIL(suite_name, test_name)
- ZTEST_EXPECT_SKIP(suite_name, test_name)
Signed-off-by: Yuval Peress <peress@google.com>
In scenarios where test_main is overridden ztest_run_all
may be invoked multiple times leading to the verify check to
fail inadvertently.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
This commit adds a check, in the `dns_read` function, before
dereferencing the query index returned by the `dns_validate_msg`
function.
This fixes the warnings generated by the GCC 12 such as:
error: array subscript -1 is below array bounds of
'struct dns_pending_query[5]' [-Werror=array-bounds]
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This fixes state transition to QoS Configured state triggered by
client-initiated Receiver Stop Ready operation on ASE that has no ISO
attached.
Fixes: ASCS/SR/ACP/BV-12-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The def command Indicates that a comment block contains documentation
for a #define macro. This is useful if the comment block documents a
macro not adjacent to it, e.g.
```c
/**
* @def MAX(x,y)
* @brief Computes the maximum of @a x and @a y.
*/
#ifdef XXX
#define MAX(x,y) ...
#endif
```
However, it is not necessary if the comment is adjacent to the
definition, e.g.
```c
/**
* @brief Computes the maximum of @a x and @a y.
*/
#define MAX(x,y) ...
```
This patch removes all unnecessary def entries in-tree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Skip IP header checksum calculation when the network interface reports
support for this feature.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
If the test is run with the config NO_OPTIMIZATIONS enabled then the
stack size usage increases by around 80% for ARM platforms.
Increase the stack size used in test cases that enables building with no
optimizations for ARM.
Update description on TEST_ARM_CORTEX_M since it was outdated and said
it was only used for a single purpose.
Fixes: #47930Fixes: #47929Fixes: #47855
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Wi-Fi protocol uses EAPoL ether type frames for authentication, so, add
support for that ether type so that they are not dropped.
Though we have NET_ETHERNET_FORWARD_UNRECOGNISED_ETHERTYPE to allow
unknown frames to be passed up the stack, but this might cause
performance penalty.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
When string and opaque types are uninitialized, we should
allow their data length to be zero. However, most content
formatters seem to calculate the string length separately
so replace the pointer of empty data into a static string
that is guaranteed to be empty.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
If LPN lost Friend node (all Poll attempts didn't succeed)
no reason to send Friend Clear to the Friend node.
This makes LPN powersupply inefficient usage.
During Friend Clear sending LPN rejects any frame from
primary subnetwork.
Specificastion doesn't mandate that LPN would send Friend Clear
if polling didn't succeed.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
For most of the times it is not necessary to do a full registration
once a connection is established after a network error. This is in
particular not needed if lifetime is not yet expired and the server
does not refuse a registration update.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Separate closing lwm2m context from closing socket. This patch is required
for the rd client to take more control over lwm2m context and the socket.
The goal is to close the socket and to keep the lwm2m context if this is
needed.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
Registration should only be updated if update of the registration was
succesful.
Signed-off-by: Andreas Chmielewski <andreas.chmielewski@grandcentrix.net>
The signal handler needs to return gracefully. When multiple
tests assert, the first assert will raise SIGABRT and the signal
handler will run and the test will stop running.
The second assert will raise SIGABRT but the signal handler
will not be called, therefore the test PASS/FAIL status is not
updated correctly.
Signed-off-by: Al Semjonovs <asemjonovs@google.com>
According to RFC 793, ch 3.9 Event Processing, receving SYN flag after
the connection has been established is an error codition:
If the SYN is in the window it is an error, send a reset, any
outstanding RECEIVEs and SEND should receive "reset" responses,
all segment queues should be flushed, the user should also
receive an unsolicited general "connection reset" signal, enter
the CLOSED state, delete the TCB, and return."
Currently TCP stack ignored such event, causing interoperability test
failures. Fix this, by verifying if the SYN flag is set in a packet in
any state other than TCP_LISTEN and TCP_SYN_SENT.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The dfu subsys is theoretically agnostic to the particular bootloader,
even if MCUboot is the only bootloader currently supported. Include the
dfu folder based on the parent symbol `IMG_MANAGER` instead of the
specific `MCUBOOT_IMG_MANAGER`.
The MCUboot specific files are already gated by the Kconfig in the
`boot` and `img_util` folders.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Fix SMP check of existing local keys when attempting to start security
with required security mode 1 level 4. The logic for checking the
conditions was wrong, leading to a situation where encryption would be
attempted to be started by the central instead of initiating a new
pairing procedure. This would fail when the connection was encrypted and
the connection would be disconnected.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This fixes sending invalid ATT Request Not Supported error code as a
response to Control Point write request.
ATT Request Not Supported error code is used to inform that
"ATT Server does not support the request received from the client",
so it should not be sent in this case.
If the requested opcode is unsupported, ASCS mandates to send ATT
Notification from Control Point with Unsupported opcode Response_Code
only. If the request received from the client is properly formatted,
ATT Write Response can be sent to complete the ATT transaction.
Fixes: ASCS/SR/SPE/BI-01-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
BT_ERR() should really be reserved for local errors only,
thus BT_WARN() is the right choice whenever a remote peer
sends something invalid that we cleanly handle.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
As per ASCS_v1.0
"A client-initiated ASE Control operation shall be defined as an
invalid length operation if the Number_of_ASEs parameter value is
less than 1".
Fixes: ASCS/SR/SPE/BI-{02,03,04,05,06}-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
While a previous change had already decoupled the IEEE 802.15.4 L2 from
IP upper layers, this only worked when at least one other interface of
the device supported IP.
This change removes this requirement and thereby fixes a build error
that occurred when disabling IP support while maintaining IEEE 802.15.4
L2 support.
Fixes: #48718
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Clear pointer to the le_adv_recv() stack frame before returning to the
calling function. This fixes a potential compiler warning newer gcc
versions.
zephyr/subsys/bluetooth/host/scan.c: In function ‘le_adv_recv’:
zephyr/subsys/bluetooth/host/scan.c:463:20: error: storing the address
of local variable ‘id_addr’ in ‘*info.addr’ [-Werror=dangling-pointer=]
463 | info->addr = &id_addr;
| ~~~~~~~~~~~^~~~~~~~~~
zephyr/subsys/bluetooth/host/scan.c:439:22: note: ‘id_addr’ declared here
439 | bt_addr_le_t id_addr;
| ^~~~~~~
Fixes#48459
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The prpa cache is now exposed through the ull_filter_lll_prpa_cache_get()
function (as the resolve list already is). This is needed to be
able to reply to AUX_CONNECT_REQ within the required time when
using SW-based RPA resolving
Signed-off-by: Troels Nilsson <trnn@demant.com>
net_if_up() unconditionally calls iface_ipv6_start() and
net_ipv4_autoconf_start(). This is not correct for interfaces that do
not support IPv4/v6.
This patch therefore introduces a check on the interface's flags before
proceeding.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
This change makes the files which are part of this changeset comply to
the project's coding style rules as defined in .clang-format.
This required addition of some forward declarations and additional
dependencies into header files as some of them depended on the order of
header inclusion which was changed due to alphabetical ordering of
includes.
Background: .clang-format states "SortIncludes:true" which will force
re-ording of include-statements which in turn might break the build if
header file inclusion is not order-independent.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
6LoWPAN fragmentation is not related to IEEE 802.15.4 proper but is just
part of its IPv6-specific L3-adaptation layer. To make this more obvious
we rename all resources related to 6LoWPAN fragmentation.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
