Rework samples to use DEVICE_DT_GET and DT_CHOSEN
to get default display controller device.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Enable the flash on RT1170 and RT1160. When booting from the CM7 core,
flash will be started in XIP mode and used as storage as well as boot
memory. When booting from the CM4 core, flash is available as storage
only, and does not run in XIP mode.
This commit was tested with the following samples
-flash_shell
-littlefs
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Added board specific configuration which enables use of
asynchronous UART API in UART log backend.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This corrects the directory pointing to sample in the README
file. Also changes the TCP port number for the second serial
port exposing the GDB stub. This allows QEMU itself to expose
GDB interface through port 1234, and Zephyr's GDB stub at
port 5678.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
uart_fifo_read() can return negative values in case
it is not implemented or CONFIG_UART_INTERRUPT_DRIVEN
is not enabled. Both cases can not actually happen in the
case of CDC ACM UART, check it anyway in case behavior
of the UART API changes unnoticed.
Align the code in RX path code of both camples and
enable TX interrupt only if data was received successfully.
Fixes: #39835Fixes: #39824Fixes: #39809
Coverity-CID: 240667
Coverity-CID: 240679
Coverity-CID: 240697
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This changes k_mem_domain_init() to return error values
instead of asserting when errors are encountered.
This gives applications a chance to recover if needed.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove option CONFIG_USB_UART_CONSOLE where it has no influence
or enable CONFIG_SHELL_BACKEND_SERIAL_CHECK_DTR without taking
a detour through CONFIG_USB_UART_CONSOLE.
Check the compatibility of chosen property instead
of usage of CONFIG_USB_UART_CONSOLE option.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This sample uses console driver and therefore
Kconfig option CONFIG_CONSOLE and CONFIG_UART_CONSOLE
are required.
Kconfig option CONFIG_USB_UART_CONSOLE no longer has
any influence here and should be removed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Currently the IPM samples are hosted in the IPC sample location. Clean
this situation up by moving the IPM samples to a new location.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This change implements qsort() for the minimal libc via Heapsort.
Heapsort time complexity is O(n log(n)) in the best, average,
and worst cases. It is O(1) in space complexity (i.e. sorts
in-place) and is iterative rather than recursive. Heapsort is
not stable (i.e. does not preserve order of identical elements).
On cortex-m0, this implementation occupies ~240 bytes.
Fixes#28896
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Remove the DT_CHOSEN_ZEPHYR_CANBUS_LABEL macro and replace it with
DEVICE_DT_GET(DT_CHOSEN(zephyr_canbus)) were possible.
Where both devicetree CAN controllers and Kconfig specified CAN loopback
controllers are supported, the macro is replaced with
DT_LABEL(DT_CHOSEN(zephyr_canbus)) for now.
This is the first pass for removing the requirement for devicetree
labels for CAN controllers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Kconfig USB_DEVICE_REMOTE_WAKEUP option depends only on
USB device controller capability, but is not controlled
by the USB device controller drivers configuration.
Move USB_DEVICE_REMOTE_WAKEUP option to drivers and
make it promptless.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Rename the Zephyr chosen property for specifying the default CAN bus
controller from "zephyr,can-primary" to "zephyr,canbus".
The "zephyr,can-primary" property name was selected in antipation of
adding support for redundant CAN networks, which we have yet to
add. Meanwhile, the "primary" term causes confusion for non-redundant
CAN bus configurations (and the "can" term doesn't match the name of the
Zephyr CAN bus subsystem).
The CAN in Automation (CiA) 302-6, which deals with CANopen network
redundancy, uses the terms "default interface" and "redundant
interface". If/when we add support for redundant CAN networks, the
"zephyr,canbus" chosen property can be supplemented with a
"zephyr,canbus-redundant" chosen property.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
As part of the work to support multiple IPC instances / backends using
IPC service, the static vrings mi code must be reworked to resemble a
classic device driver.
Fix also the sample using it.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM device runtime API calls from pm_device* to the
pm_device_runtime* namespace.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After the removal of pm_device_get_async, the pm_device_wait API has
become redundant. Its usage after pm_device_put_async should not be
considered a valid usecase, since after that call what will happen is a
pm_device_get (which is blocking).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As of today there is no clear usage of asynchronous gets, since in
general, a resume operation should be synchronous (we are about to use
the device immediately after resuming it). Removing this API simplifies
the runtime implementation in a significant way (refer to future
commits).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Convert remaining tests and samples to using find_package() instead of
literally including the CMake boilerplate code.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
After the __printf_like validation was added to the shell_fprintf
functions we got warnings while building the
'samples/subsys/shell/shell_module' due to incorrect specifiers
while printing size_t variables. Fix that.
Fixes: #39386
Fixes: fe2075d140 "shell: Add __printf_like to shell_fprintf"
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Uses the stats subsys to provide simple but useful debugging stats for
power management state changes and timing.
Removes the no longer needed PM_DEBUG config option
Replaces the use of PM_DEBUG for a test clock output pin for mec1501 and
adds in its place an SoC Kconfig option to enable it.
Adds a STATS_SET macro for assigning a value to a stat group field
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This commit adds a new subcommand to the `demo` command that prints out
the name of the used board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
cAVS 1.5 has little RAM, force COMP_SRC_TINY to fix SOF build
failures under Zephyr with XCC.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
tracing.osawareness.openocd relies on the CONFIG_THREAD_NAME is
enabled, however we don't enable it in test config.
Fix that.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The tracing.osawareness.openocd doesn't support executing
on multicore Zephyr. However we disable multiple CPUs
usage in two different ways for this test:
- by setting CONFIG_MP_NUM_CPUS to 1
- by setting CONFIG_SMP to n
It's not correct for all SMP platforms to disable SMP. As
it is also excessive (we can guarantee the execution on
single core by setting CONFIG_MP_NUM_CPUS=1) let's drop
SMP disabling.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Only one single IPC service backend is currently present: multi_instance
backend. This backend is heavily relying on the RPMsg multi_instance
code to instanciate and manage instances and endpoints. Samples exist
for both in the samples/subsys/ipc/ directory.
With this patch we are "unpacking" the RPMsg multi_service code to make
it more modular and reusable by different backends.
In particular we are re-organizing the code into two helper libraries:
an RPMsg library and a VRING / virtqueues static allocation library. At
the same time we rewrite the multi_instance backend to make fully use of
those new libraries and remove the old multi_instance sample.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The samples/subsys/mgmt/osdp utilize GPIO so having it set in the
prj.conf is needed since not all platforms enable GPIO by default.
To address the 'No SOURCES given to Zephyr library: drivers__gpio'
add a 'depends on gpio' to the sample.yaml to only build this on
platforms that have GPIO driver support.
Fixes#39180
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move related areas to their own files and order
documentation logically from lower to upper layer.
Fix gross errors and inconsistencies.
Co-authored-by: Carles Cufí <carles.cufi@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The task_wdt_init() API can fail to install a timeout for the fallback
hardware WDT (hw_wdt) without returning an error code. This patch
enables task_wdt_init() to return the hw_wdt install timeout error code
if the hw_wdt install timeout fails.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
Some build variants will fail runtime for certain boards (e.g. nRF52832)
due to stack overflow. Avoid this by increasing the stack size.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
As this makes no difference, it's misleading so let's remove it to stop
being misled. I don't know why initial commit efa794dbc5 added it but
the build directory is strictly identical with or without this line.
The SOF code is included in the build thanks to CONFIG_SOF in prj.conf,
not this.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Each backend can configure separately features like colors on/off, VT100
handling and so on. This can be very handy for planned MQTT backend.
Shell will not send VT100 commands when VT100 is not enabled globally or
for particular backend.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Fixes: #38403
Removing unneeded `imply GPIO` and `CONFIG_GPIO=y` occurrences where no
files are added to the gpio zephyr library.
Also removed `CONFIG_GPIO=y` occurences where this is handled by
defconfigs for the soc or board.
Selection of GPIO without selecting any drivers results in the warning:
> No SOURCES given to Zephyr library: drivers__gpio
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Fixes: #38403
Adding NET_DRIVERS menuconfig so that network drivers are grouped
together in its own menu entry under drivers, similar to most other
drivers.
This further has the advantages that `CONFIG_NET_DRIVERS` can be used
for testing to determine if network drivers has been selected.
This changed revealed a dependency loop where both `select` (for SLIP)
and `depends` (for PPP) which both depends on NET_DRIVERS` where in use
in the dependency tree for Qemu networking, especially NET_SLIP_TAP.
This is handled by defaulting `NET_DRIVERS` to `y` when building for a
Qemu target.
`SLIP` had a dependency to `!QEMU_TARGET || NET_QEMU_SLIP`. This is
changed so that SLIP prompt depends on `!QEMU_TARGET` which provides
full user control in hardware but makes the symbol promptless on Qemu
targets.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Update the sample.yaml files for the modbus samples:
- depends_on entries should just be space separated, drop the comma
- add the platform referenced in the documentation to platform_allow
- replace the deprecated dt_compat_enabled_with_alias with
dt_enabled_alias_with_parent_compat
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
This has been unreferenced since:
4ff616b647 modbus: rework interface configuration
This generates a compiler warning, but it went unnoticed because the
sample test is configured incorrectly and not running.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
With "Incompatible (u)intptr_t type and PRIxPTR definitions",
https://github.com/zephyrproject-rtos/zephyr/issues/37718,
issue resolved the FIXME code is no longer needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add a warning if the image is unconfirmed. Add a delay before rebooting
so that the user knows what happened.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix two typos in documentation, one in a sample's comment, and one in a
sample's console message. Found while learning Zephyr and exploring the
sources.
Signed-off-by: Nikolai Kondrashov <spbnick@gmail.com>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The user tracing backend allows one to implement weak symbols to perform
user specific tracing, e.g gpio toggling or spi transactions. This adds
a qemu sample that just does a simple printk for each of the traced
functions, but could be changed to do whatever function the user
desires.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
This patch is the first step to make the rpmsg_multi_instance usable in
a multi-core scenario.
The current driver is using a local driver variable (instance) to track
the number of allocated instances. This counter is practically used to
allocate to the instance the correct portion of the shared memory.
This is fundamentally wrong because this is assuming that it does exist
only one single shared memory region to split amongs all the allocated
instances. When the platform has more than one core this is obviously
not the case since each couple of cores are communicating using a
different memory region.
To solve this issue we introduce a new struct rpmsg_mi_ctx_shm_cfg that
is doing two things: (1) it's carrying the information about the shared
memory and (2) it's carrying an internal variable used to track the
instances allocated in that region. The same struct should be used every
time a new instance is allocated in the same shared memory region.
We also fix a problem with the current code where there is a race
between threads when accessing the instance variable, so this patch is
adding a serializing mutex.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
For the instance configuration the rpmsg_multi_instance code is
currently using a set of configuration info coming from two different
sources: the rpsmg_mi_ctx_cfg struct and Kconfig.
This is not only confusing but it's preventing to configure the
instances using information not coming from Kconfig (for example if we
want to configure the instance using DT).
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The formatting options, passed to the printk, caused warnings when
compiling for native_posix_64.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Follow up on commit bfd45e5b8c
("drivers: remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME")
Now we can also remove Kconfig option CONFIG_UART_CONSOLE_ON_DEV_NAME
since all UART drivers are converted to devicetree and we can just use
DEVICE_DT_GET(DT_CHOSEN(zephyr_shell_uart)).
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Commit c79b1a38aa ("samples: display:
Convert driver and lvgl sample.yaml to use depends_on") started using
depends_on in the sample YAML for a lvgl application instead of
platform_allow.
This breaks build testing with twister and overflow checking enabled
on more resource constrained platforms. The test case's .config
ends up with:
CONFIG_LVGL_HOR_RES_MAX=320
CONFIG_LVGL_VER_RES_MAX=240
CONFIG_LVGL_VDB_SIZE=64
CONFIG_LVGL_BITS_PER_PIXEL=24
And lib/gui/lvgl/lvgl.c, where we allocate a buffer of size:
(CONFIG_LVGL_BITS_PER_PIXEL *
((CONFIG_LVGL_VDB_SIZE * CONFIG_LVGL_HOR_RES_MAX *
CONFIG_LVGL_VER_RES_MAX) / 100)
/ 8)
Require 147456 bytes to build the sample, ultimately overflowing RAM
if you run something along the lines of:
twister -T samples -p <constrained_platform> --overflow-as-errors
This is a reasonable test to be doing to make sure that sample RAM
requirements do not get too big for a subset of platforms that are of
interest, and it no longer works.
To fix it, add a min_ram line for this case so that we can still run
overflow tests on a large set of samples without fine-grained special
casing or creating an ever-growing list of platform excludes for this
test.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add usb.overlay which contains chosen node and cdc-acm-uart node.
Change sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This reverts commit e53371bbc0bc37d911884937199733f23c43fb21.
The "usbd0 aliases" approach has not proven to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use a semaphore to prevent the hawkbit_probe from running more than once
at the same time since it reset the hawkbit context on entry and will
affect other running instance.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Fix multiple typos and make the sample's log output consistent
with the subsys.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Co-Authored-By: Sylvio Alves <sylviojalves@gmail.com>
This commit adds a devmem load command for shell that allows
users to easily load arbitrary data into the device memory.
Signed-off-by: Mateusz Sierszulski <msierszulski@internships.antmicro.com>
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The addition of image number parsing, in mcumgr library, requires
increase in the stack size for the smp_svr to work.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds chapter, to the documentation, that explains
how to select target image to upload, and how does the image number
maps to the DTS image defintion and the slot number.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The sample only supports device-to-host control requests.
Return -ENOTSUP on host-to-device control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current code the naming of the
CONFIG_RPMSG_MULTI_INSTANCE_?_IPM_{TX,RX}_NAME symbol is 1-based. While
this is not currently an issue, it could easily become such if the
symbol is programmatically used as part of a preprocessor enumeration
(for example when using DT_INST_FOREACH_STATUS_OKAY(...) & co).
To avoid trouble, just make the index starting from 0 instead than 1.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add Atmel sam0 sercom[uart] pinctrl bindings and implements pinctrl at
driver level. It changes all sam0 boards to use new feature and remove
pinmux driver dependency for sercom[uart]. The samples that require a
binding were update to keep consistency and avoid errors.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Demonstating usage of IPC Service. Multi-instance RPMsg
was ued as a backed for IPC Service.
Signed-off-by: Marcin Jeliński <marcin.jelinski@nordicsemi.no>
Add nucleo_wl55jc to platform_allow for lora send/receive and class_a
samples. The board has a variation of the sx1262 driver, this should
allow to build test that code path.
Fix the existing config as well to specify the platforms on a single
line, as currently only the last entry is considered.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit update the NS board variant from
`v2m_musca_b1_nonsecure` to `v2m_musca_b1_ns` to maintain
consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use the actual minimum timeout used by the sample for task watchdog
channels (100 ms) as the configuration value for the fallback hardware
watchdog, to avoid unnecessary executions of the timer handler.
Add missing indentation in the documentation of the sample so that
the console output is rendered correctly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Increase main and system workqueue stack sizes to avoid overflows
as the LoRaMac-node library is quite stack-hungry.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
Use of CONFIG_THREAD_RUNTIME_STATS was added to this sample, but
caused issue because the call to z_thread_mark_switched_in()
is using k_cycle_get_32() before the timer is initialized.
Enable CONFIG_THREAD_RUNTIME_STATS_USE_TIMING_FUNCTIONS=y to
select hidden config CONFIG_TIMING_FUNCTIONS_NEED_AT_BOOT,
which calls to initialize the timer needed at boot for thread
runtime stats configuration.
Fixes#33275
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
Most APIs have the default synchronous and an asynchronous version
with the sufix _async because that is the most common use.
All devices in tree right now are using the synchronous version, so
just change it to be consistent with the rest of the system.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since we are using mutex to protect critical sections and mutexes are
reentrant, it is possible to get rid of atomic for the state because
we can lock the mutex in device_pm_callback.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Changing from spinlock to mutex makes the running thread be preempted
and the workqueue ran. This changed the prints order in this sample.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
File prj.mcp2515.conf was previously removed from project as it was
made redundant.
Paths containing uppercase CAN were changed to lowercase.
Signed-off-by: Nick Ward <nick.ward@setec.com.au>
When a WIFI driver is slow to get interface up the system not connect
to WIFI access point. This add some tries to let driver be proper
initialize to allow accept connection request.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Similar to commit c6ff61220e, use a
harness config to limit execution of the adafruit_2_8_tft_touch_v2
sample variant to boards that have this shield attached.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses aliases and remove board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Fixes: #25313
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Converts the display driver and lvgl sample.yaml to select boards for
the adafruit_2_8_tft_touch_v2 shield configuration by depending on the
arduino_{gpio,i2c,spi} features instead of using an explicit
platform_allow list. This will enable twister to automatically select
new boards that add support for Arduino ports.
The reel_board and reel_board_v2 are excluded due to a conflict between
display drivers (onboard display vs. shield display).
The ubx_evkannab1_nrf52832 board is excluded due to a conflict between
the arduino_spi and arduino_i2c ports, which cannot be used
simultaneously.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes sample execution ending early with error, as it attempted
to mount the LittleFS partition second time, after it has already
been mounted by the auto-mount feature.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
"child resuming" text is printed when dummy_device_pm_ctrl is
called. The driver is using the async api, this means that this call
will happen only when the worqueue runs what will happen only when
this thread blocks waiting on the conditional variable.
The last thing is, the dummy driver was putting the parent driver
asynchronously consequently the "parent suspending" message would just
print after "Device PM sample app complete". Just use the sync API to
get these messages printed in the expected order.
Fixes#35336
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for new tracing macros in test backend. Move header from
sample into the subsystem and make it available for general testing with
any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The sync API was using k_poll_signal and in certain conditions is
possible multiple threads waiting on a signal leading to an undefined
behavior.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add mimxrt685_evk_cm33 board to the platform_allow list
for the littlefs sample application.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
The Kconfig option SHELL_BACKEND_SERIAL had been defaulting to y,
causing shell to block mcumgr from processing serial input.
Fixes: #34670
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
With the change to use GPIO_DT_SPEC_GET_OR a number of platforms
failed to build these samples. This was due to the GPIO drivers not
being enabled by default. Add CONFIG_GPIO=y to the prj.conf to fix
the issue.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Get the correct flash device from the storage partition node.
The current code is relying on the invalid assumption that the
chosen zephyr,flash-controller node is the device which contains
the storage partition.
Reported-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace device_get_binding with DEVICE_DT_GET(). Fix and clean up
error handling and debug printing during initialization.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the new GPIO_DT_SPEC_GET_OR() macro to clean up the node detection
code by eliminating conditional compilation. This increases code
coverage on platforms where not all the devicetree nodes are
available.
Clean up some whitespace while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adds mimxrt1060_evk and mimxrt1064_evk boards to the platform_allow list
for the smp_svr sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In this example, python test case get the running directory by handling
the "--cmdopt" option passed by pytest.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
The cbprintf packaging needs CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE
to be enabled to work with long double. So #ifdef that inside
CONFIG_FPU.
Also add to the sample.yaml to enable testing with FPU and
long doubles.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Allow SMP processing for SOF on ADSP. Note, that after this
SOF will build with SMP support enabled on all cAVS versions,
but secondary cores will remain disabled unless an SMP
topology is loaded by the host.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds a sample application on dictionary-based logging.
The README file includes instruction on how to run the log parser
to generate human readable log messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When building and running the rpmsg_service sample on MPS2 AN521
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building and running the openamp sample on MPS2 AN521,
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Limit adafruit_2_8_tft_touch_v2 sample variant execution to the boards
that have this shield available.
In order to run the test in CI bench, add the following in
twister map.yml file on matching board:
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
For instance:
- connected: true
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
id: 0673FF323535474B43171415
platform: nucleo_f429zi
product: STM32 STLink
runner: openocd
serial: /dev/ttyACM0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds a new sample configuration to build the fat_fs sample with the
adafruit_2_8_tft_touch_v2 shield and SDMMC SPI driver in CI. It has been
tested with frdm_k64f and mimxrt685_evk_cm33 boards, but should work
with any board that supports Arduino SPI and Arduino GPIO features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can use the adafruit_2_8_tft_touch_v2 shield with
mimxrt685_evk_cm33 and frdm_k64f boards, start building the display
driver and lvgl samples for these boards in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
shell_uart_release command shows how shell can be uninitialized and
release transport resources (uart) and reinitialized at runtime.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This patch removes sdhc_api references since such API
does not actually exist. SD card controller drivers
use disc driver interface. Accordingly, the SDHC documentation,
which actually describes how to connect a SD card via SPI
and has little to do with SD host controller (SDHC),
is also moved to disk access page and adapted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add function to get Modbus RTU interface index according
to interface name. This can be used to clearly identify
interfaces in the application.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The exported structures that were originally introduced for OpenOCD have
since then been reused for other debugger plugins, including PyOCD and
Segger J-Link.
Rename the Kconfig option and the implementation from openocd to debug
thread info, so that it reflects the fact that this is no longer
specifically tied to OpenOCD.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
HID report descriptor in the sample has unnecessarily output report
which is not used anywhere. This patch removes unnecessary report.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HID sample has on_idle callback implementation present in the code,
but has not turned on USB_DEVICE_SOF and so does not have
corresponding code in sample self and class/hid/core.c covered.
Also on_idle implementation in HID sample has not taken into
account send_report() which also calls hid_int_ep_write().
This patch enables USB_DEVICE_SOF and revises both on_idle and
the regular report function.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Originally added in 7733b94224.
This filter is not well-formed. It's meant to match nodes like
/leds/led_0 in this DTS:
/ {
aliases {
led0 = &led0;
};
leds {
compatible = "gpio-leds";
led0: led_0 {
gpios = <...>;
label = "LED 0";
};
};
};
Uses look like this:
filter: dt_compat_enabled_with_alias("gpio-leds", "led0")
But notice how the led_0 node doesn't have compatible "gpio-leds";
it's actually the *parent* node that has that compatible.
Replace this with a new filter, dt_enabled_alias_with_parent_compat(),
which is used like this:
filter: dt_enabled_alias_with_parent_compat("led0", "gpio-leds")
This has a name and argument order that makes the meaning of the
filter clearer.
Replace in-tree users with the new filter.
Deprecate the old filter and warn about its use using the standard
logging module.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This should align with subsys/display which we do not have yet. Plan is
to move lib/gui into subsys/display.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move samples under subsys/audio. We still do not have this as a
subsystem, but it is on the horizon.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove SPI_[0-8] and SPI_[0-8]_OP_MODES Kconfig symbols as no driver
uses them anymore. We also cleanup board and sample code to remove
use of these symbols.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some boards prefers immediate mode (native_posix) but this sample is
intended to use deferred mode. Add explicit setting.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove stale references to v2m_musica in the ipc samples as the board
support for v2m_musca has been removed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to a single platform, we
prefer native_posix, than a qemu platform mps2_an385 and finally a
hardware platform.
For the 'basic' sample we use native_posix, for the 'rtt' we use
frdm_k64f ad we need a hardware platform that supports 'rtt', and for
the 'usermode' we utilize 'mps2_an385' as we can run in QEMU.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Set integration_platforms on these samples to just mps2_an385.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Modify an example by adding command that is using shell_getopt funtion.
Extent sample.yaml with getopt configuration.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
The default shell configuration has heavy flash and memory requirements,
requiring project maintainers to set many configuration options to "n"
to keep flash and memory requirements within reason.
This adds a new configuration option, CONFIG_SHELL_MINIMAL, which will
disable flash and memory heavy options by default, and allow project
maintainers to select/imply only the options they want.
On a quick test from an ARM board I'm working on, enabling this option
cut flash space requirements by ~8 KB, and memory requirements by ~1 KB.
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Set integration_platforms on these samples to just native_posix.
This should be sufficient to make sure these tests build and run.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove support for the Musca-A board. This board is rarely used, few
are available and superceded by Musca-B and Musca-S.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes problem where UART DFU mage uploads via mcumgr get interrupted
by the mcuboot_util logs, causing uploads stuck and fail on time-out.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The sample was failing twister test with a timeout because there was
no pass/fail criteria for it (nothing was tested). The fix adds
harness on consolse and some output that can be verified.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The commit adds initialization of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The commit adds initializations of fs_dir_t variables in preparation
for fs_opendir function change that will require fs_dir_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
We cannot automatically flash both master and remote images
to nRF5340 application and network core, this needs to be
done separately. We therefore, cannot execute the test on
nRF5340, so we switch to make the test build-only on this
platform. We also make nrf5340_cpuapp an integration
platform for the given sample.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Start using DTS values for PCI Vendor ID and PCI BDF. For the PCI
Device ID we do not use DTS since this would require changing overlay
for different SKU board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exlude native_posix platform from USB samples but
add build-only test case.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The commit adds initializations of fs_file_t variables in preparation
for fs_open function change that will require fs_file_t object, passed
to the function, to be initialized before first usage.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mcumgr-cli application doesn't accept log on the communication
channel. Since #30370 was merged log messages are generated from
MCUBOOT_UTIL by default. That made `mcumgr image upload` failing.
Patch disables logging via shell which cure the issue.
It is not necessary if another application on the host intercepts
log messages (like picocom can).
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Mass-erase the flash prior to running the sample to ensure the storage
partition can be initialized correctly.
Fixes: #30477
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add EDAC shell application demonstrating EDAC API usage. Can be used
for verification of the functionality with error injection mechanism.
Sample is also included in the twister tests.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
