This change the applications to get device from the
compatible of the zephyr_udc0 node.
It is defined by the DTC_OVERLAY_FILE="app.overlay"
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix building this sample on bl5340_dvk_cpuapp_ns and
pinnacle_100_dvk. On these boards the NORDIC_QSPI_NOR
driver needs to be enabled for the sample to build.
Signed-off-by: Kumar Gala <galak@kernel.org>
All in tree device drivers use some form of DEVICE_DT_GET
so we no longer need to require label properties.
Signed-off-by: Kumar Gala <galak@kernel.org>
The sample proviades required overlays only for 3 platforms.
Therefore, flash scenarios can only work on those 3 platforms.
To reflect this, platform_allow has to be used instead of
integration_platforms, so boards without overlays are not picked up
into a scope.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add integration platforms to mass_flash_fatfs and mass_flash_littlefs
tests as these options are tuned for specific platforms.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Test sections, mass_flash_fatfs and mass_flash_littlefs,
and corresponding Kconfig options are mixed up.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Function uart_fifo_read() returns 'int' (it may return negative values
in error cases). Its return value is stored in the variable 'read' that
is, however, of type 'size_t'.
Change the type of the variable 'read' from 'size_t' to 'int' to
accomodate proper handling of uart_fifo_read() invocation.
Coverity-CID: 248408
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Some information in the USB DFU sample was out of date.
Also added some example lines for the Permanent download and automatic
reboot features.
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
This commit adds the USB_DFU_PERMANENT_DOWNLOAD and USB_DFU_REBOOT and
symbols.When the permanent download symbol is enabled, slot 1 will be
marked as confirmed. With the reboot symbol enabled, the devices
automatically reboots after the download is completed.
The functionality is split into two symbols to allow the automatic
reboot without confirming the image. This enables image confirmation via
another channel. For example via the shell’s Mcuboot commands.
This functionality allows downloading an image to the device without the
user having to interact with the device. It is useful in cases where
ease of use is more important then safety. For example when using USB
download for daily development. This is especially applicable for
devices with a closed case.
The changes were tested on an nrf52840dk. The following line can be used
to build the USB DFU example with the symbols enabled.
west build -b nrf52840dk_nrf52840 zephyr/samples/subsys/usb/dfu \
-d build-dfu -- -DCONFIG_BOOTLOADER_MCUBOOT=y \
-DOVERLAY_CONFIG=overlay-reboot-permanent.conf \
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE\
=\"bootloader/mcuboot/root-rsa-2048.pem\"
Fixes#41921
Signed-off-by: Martijn Stommels <martijn@martijnpc.nl>
Reserve the upper 8 bits of gpio_dt_flags_t for SoC specific flags and
move the non-standard, hardware-specific GPIO devicetree flags (IO
voltage level, drive strength, debounce filter) from the generic
dt-bindings/gpio/gpio.h header to SoC specific dt-bindings headers.
Some of the SoC specific dt-bindings flags take up more bits than
necessary in order to retain backwards compatibility with the deprecated
GPIO flags. The width of these fields can be reduced/optimized once the
deprecated flags are removed.
Remove hardcoded use of GPIO_INT_DEBOUNCE in GPIO client drivers. This
flag can now be set in the devicetree for boards/SoCs with debounce
filter support. The SoC specific debounce flags have had the _INT part
of their name removed since these flag must be passed to
gpio_pin_configure(), not gpio_pin_interrupt_configure().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Firmware uploading to the host may not always be desired,
disable it by default.
Enable it for existing USB DFU sample to keep
the usual behavior, add note about new option to README.rst.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
For functions returning nothing, there is no need to document
with @return, as Doxgen complains about "documented empty
return type of ...".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Fix wrong extra_args definitions wich cause that this args were not used
by CMake during building this samples via Twister in CI.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Replace deprecated macro USBD_CFG_DATA_DEFINE by
USBD_DEFINE_CFG_DATA which places usb_cfg_data structures
in specific iterable section.
Replace __usb_data_start, __usb_data_end usage patterns
size_t size = (__usb_data_end - __usb_data_start);
for (size_t i = 0; i < size; i++) {...}
by
STRUCT_SECTION_FOREACH(usb_cfg_data, ...) {...}
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
In the current USB device support, the sizes of bulk endpoint
are mostly configure through Kconfig and do not care if a device
is high-speed capable. The information if a USB device controller
supports high-speed comes from devicetree. Add a Kconfig option to
map this information and configure bulk endpoint sizes
accordingly.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
uart_fifo_read() can return negative values in case
it is not implemented or CONFIG_UART_INTERRUPT_DRIVEN
is not enabled. Both cases can not actually happen in the
case of CDC ACM UART, check it anyway in case behavior
of the UART API changes unnoticed.
Align the code in RX path code of both camples and
enable TX interrupt only if data was received successfully.
Fixes: #39835Fixes: #39824Fixes: #39809
Coverity-CID: 240667
Coverity-CID: 240679
Coverity-CID: 240697
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This sample uses console driver and therefore
Kconfig option CONFIG_CONSOLE and CONFIG_UART_CONSOLE
are required.
Kconfig option CONFIG_USB_UART_CONSOLE no longer has
any influence here and should be removed.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Kconfig USB_DEVICE_REMOTE_WAKEUP option depends only on
USB device controller capability, but is not controlled
by the USB device controller drivers configuration.
Move USB_DEVICE_REMOTE_WAKEUP option to drivers and
make it promptless.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Convert remaining tests and samples to using find_package() instead of
literally including the CMake boilerplate code.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Move related areas to their own files and order
documentation logically from lower to upper layer.
Fix gross errors and inconsistencies.
Co-authored-by: Carles Cufí <carles.cufi@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The additional depends on SOC_FAMILY_SAM was redundant.
Add sam4l_ek to dfu sample exclude since it was failing on
arduino_due.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Add app.overlay which contains chosen node and cdc-acm-uart node.
Rework sample to get CDC ACM UART device from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add app.overlay which contains cdc-acm-uart nodes.
Rework CDC ACM and HID samples to get CDC ACM UART device
from devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses reference to zephyr_udc0 and remove
board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
This reverts commit e53371bbc0bc37d911884937199733f23c43fb21.
The "usbd0 aliases" approach has not proven to work.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The sample only supports device-to-host control requests.
Return -ENOTSUP on host-to-device control requests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Function used for filtering "dt_compat_enabled_with_label" was not
working as expected as it was not taking into account that we're
looking for a children/parent combination:
Provided "compat" with enabled status should be the one of the parent
of the node matching given label.
Function is then reworked to take this into account.
And to make it's usage clear:
- function name is changed to be clearer on the intention
- args order is reversed to be more logical wrt the intention
Users of the function are also updated to take the change into
account.
Fixes#36093
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
USB audio class samples are generic and can be built for any
board that supports USB device and isochronous endpoints.
Add app.overlay that uses aliases and remove board specific overlays.
Note: USB audio is still experimental and even though the sample can
be built for specific platform, it does not mean that it can be run
on it without issues.
Fixes: #25313
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Use the new GPIO_DT_SPEC_GET_OR() macro to clean up the node detection
code by eliminating conditional compilation. This increases code
coverage on platforms where not all the devicetree nodes are
available.
Clean up some whitespace while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
