The current atmel sam flash driver was develop based on the cortex-m7
version of smart arm microcontroller. The driver support write
protection and cache functions which is not supported by other cortex-m
variants. This fixes current driver implementation and devicetree
entries for all sam variants.
Notes:
* The cortex-m3 doesn't have support erase pages flash command and
because of that the driver still not not compatible. Keep it disabled
until a patch be send. The hwinfo driver is not affected by this
restriction.
* The sam4l variation requires a specific driver because uses another
flash controller (flashcalw). Added another compatible to
differentiate and keeped node disabled until a driver be available.
Fixes#48516
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
() Fix the compatible string from "intel,dai,dmic" to
"intel,dai-dmic".
() Also rename the yaml file to have vendor name first.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use a test compatible so that test can create a DT-based device and
provide a valid choice when building the test.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to work on a clock speed higher than 20 MHz, IO MUX is required.
Co-authored-by: Glauber Maroto Ferreira <glauber.ferreira@espressif.com>
Signed-off-by: XiNGRZ Chan <hi@xingrz.me>
various microchip bindings set 'girq-cells' and 'pcr-cells'
sections in the bindings. However the bindings where for the
client nodes and thus do not need to set these.
Signed-off-by: Kumar Gala <galak@kernel.org>
Change the wording about "alternate/optional" clock to "domain" clocks,
to better describe the feature and minimize confusion.
Additionally, provide more description about domain clocks and dual
domain functionality implemented in peripherals.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds optional device tree property to specify a default character
to clock out when the TX buffer pointer is NULL. If the property is
not set the existing behavior (default char of 0x00) is used.
I verified the expected behavior using an i.MX RT685 board and
logic analyzer that the def-char character is transmitted when
TX buffer pointer is NULL.
Signed-off-by: Bryce Wilkins <bryce.wilkins@gmail.com>
LPC55s3x family has an additional analog mode bit available. Update
IOCON binding and IOCON driver to support setting this bit via a pin
control property.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use Devicetree to describe the UART UPIPE IEEE 802.15.4 driver. This
allows to remove usage of IEEE802154_UPIPE_DRV_NAME in preparation for
the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_NRF5_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME.
All SoC files have been updated with the addition of an ieee802154 node
(disabled and only on those SoCs that define ieee802154-supported. The
peripheral has been enabled in the nRF52840DK board (used for testing
ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_KW41Z_DRV_NAME in preparation for the removal
of NET_CONFIG_IEEE802154_DEV_NAME.
KW41Z files have been updated with the addition of radio and an
ieee802154 nodes The peripheral has been enabled in the frdm_k41z board
(used for testing ieee802154).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_SUBG_DRV_NAME in preparation
for the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME. All boards used in testing
have been updated to enable the peripheral in DT as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
ICI (Inter-Core Interrupt Unit) interrupts and priorities were hardcoded
in C files. This patch moves this information to Devicetree and updates
code to make use of it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
sysconf base address was hardcoded in <soc.h>. Create a new compatible
and define it in Devicetree, where hardware needs to be described.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Introduce a simple binding for atmel,24mac402 EEPROM that the SAM
GMAC ethernet driver can utilize to get MAC address out of. We
introduce a 'mac-eeprom' phandle into GMAC ethernet devicetree
node that will provide a pointer to the MAC eeprom to utilize.
Signed-off-by: Kumar Gala <galak@kernel.org>
The CLINT (Core Local Interruptor) description was not aligned with
Linux. For example, there's no "riscv,clint0", but "sifive,clint0". The
peripheral is not described as an interrupt-controller either.
Ref. https://elixir.bootlin.com/linux/v5.18.14/source/arch/riscv/boot/
dts/starfive/jh7100.dtsi#L106
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
After some analysis I found out that there's no machine timer provided
by the "riscv" vendor. There are some specs for the mtime/mtimecmp
registers (this is why we can have a single driver), but the actual
register layout or implementations differ amongst vendors. GD32 uses the
Nuclei implementation, named "system timer" in their documentation. This
patch aligns with vendor specs.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds a driver for Maxims DS2484 Single-Channel 1-Wire master
driver. The DS2484 features an extra pin to enable sleep modes which
is available if the pin is configured in the device tree.
Signed-off-by: Caspar Friedrich <c.s.w.friedrich@gmail.com>
Unlike stated in 57df225b396e43358aac4cc998ed2e99fdb57780, RM0456.pdf
reference manual mentions about PLL1R that "Only division by 1 and even
division factors are allowed."
Though, in reference manual, there is one issue on PLL1R values
description, which should actually be:
0000000: pll1_r_ck = vco1_ck
0000001: pll1_r_ck = vco1_ck / 2 (default after reset)
0000010: Not allowed
0000011: pll1_r_ck = vco1_ck / 4
...
This description will be fixed.
Reflect this in binding and driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of enabling WOVCRO clock based on the SOC, use a configuration
to indicate support, so that each platform can specify if WOVCRO is
supported or not.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Add binding for Aspeed AST10x0 clock driver. The clocks can be turned
on or off through the syscon registers.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
The UC8176 and UC8179 chips that exist in tree have subtly different
register layouts. Use separate compatible strings for these chips and
a quirks structure that describe device-specific behavior.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
The GD7965 driver is really just a vendor name for the UltraChip
UC8179. Rename the driver to UC81xx since there are other chips in the
family (e.g., the UC8176) with an almost identical register interface.
Signed-off-by: Andreas Sandberg <andreas@sandberg.uk>
For the !SOC_I2C_SUPPORT_HW_CLR_BUS in which we implement bus
reset via GPIOs, change the devicetree properties to be actual
gpio properties and update the code to reflect this.
Signed-off-by: Kumar Gala <galak@kernel.org>
This commit adds the pll2 and pll3 clock control nodes
with st,stm32u5-pll-clock compatible.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit changes the range for stm32u5 pll divider values
to allow divider value of 1.
- DIVQ is allowed to beconfigured 1 for all PLL instances
- DIVR can be 1 for PLL2 and PLL3, but is not valid for PLl1.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
We have drivers for "nxp,lpc-rtc" and "zephyr,native-posix-counter"
devicetree compatibles, however we had no bindings for them. Add
simple bindings
Signed-off-by: Kumar Gala <galak@kernel.org>
Two files ending with yml while the rest is ending with yaml, just
rename those two to avoid special handling.
Fixes documentation build.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
