This PR adds a KConfig option that allows moving
all .noinit content related to wifi a net stack into external
ram. This free dram space to application.
Linker script files are also modified so that the content
are mapped into external ram.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Replace eswifi_gpio with gpio_dt_spec. We can replace devicetree
label based access with this change as we try and phase out the
usage of the 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
If the preprocessor constant ESP_MAX_DNS is defined as 0,
Coverity reports a condition that can never be true, and some
dead code as well. This also violates MISRA rules on dead code.
This is caused by this segment in drivers/wifi/esp_at/esp.h:
#if defined(CONFIG_WIFI_ESP_AT_DNS_USE)
#define ESP_MAX_DNS MIN(3, CONFIG_DNS_RESOLVER_MAX_SERVERS)
#else
#define ESP_MAX_DNS 0
#endif
Fix this by never setting ESP_MAX_DNS to 0, as is the currently
case. Define ESP_MAX_DNS only if it is configured through
CONFIG_WIFI_ESP_AT_DNS_USE and CONFIG_DNS_RESOLVER_MAX_SERVERS:
#if defined(CONFIG_WIFI_ESP_AT_DNS_USE)
#define ESP_MAX_DNS MIN(3, CONFIG_DNS_RESOLVER_MAX_SERVERS)
#endif
Since CONFIG_DNS_RESOLVER_MAX_SERVERS is 1 or greater, ESP_MAX_DNS
will always be greater than 0.
If, on the other hand, ESP_MAX_DNS is not defined, relevant
functions will be reduced to empty stubs, since in that case
they do not make sense.
There could be a cleaner solution to this, but this one is the
least intrusive (involves less code changes).
Coverity-CID: 219490
Coverity-CID: 219513
Coverity-CID: 219520
Coverity-CID: 219524
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Files including <zephyr/kernel.h> do not have to include
<zephyr/zephyr.h>, a shim to <zephyr/kernel.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This driver uses stack buffers to hold AT command strings which are
generated at runtime using sprintk. The buffers are only sized for the
expected range of values, not the full possible range given the datatypes
involved. Values outside this expected range could cause a buffer overflow.
To mitigate this, increase the size of each buffer to hold the full range
of each parameter type.
Signed-off-by: Keith Packard <keithp@keithp.com>
Move away from 'modem_pin' abstraction as it has not obvious value compared
to generic 'gpio_dt_spec'.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
UART device pointer is already used directly when configuring modem
interface. Convert the case when UART is reconfigured when 'target-speed'
DT property is specified.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
PHY TX power configuration must be added into soc level.
It was previously hardcoded in hal_espressif, which was removed.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Some sockets (UDP sockets at least) do not generate "<N>,CLOSED"
messages when the WiFi network drops. As a result the networking stack
thinks these sockets are still open after the network has dropped, and
after any subsequent reconnections.
This affects the DNS resolver library in particular, which leaves UDP
sockets open permanently by default.
Manually close these sockets when the network drops to ensure a clean
state the next time the network connects.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
`esp_close_work` can be queued from the `on_cmd_closed`, which clears
`ESP_SOCK_CONNECTED` and sets `ESP_SOCK_CLOSE_PENDING`, but does no
further work. The receive callback should still be run with no data when
the socket is closed through this mechanism.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Log a message when the modem asynchronously closes a link. This is
useful information to the user as it can explain the root cause of later
failures.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Use the proper `%p` printf specifier when printing memory addresses,
instead of casting to an integer, which may not be the same size as a
pointer.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a separate macro for registering offloaded sockets implementation,
along with information in the structure whether the implementation is
offloaded or not. This allows to differentiate between native and
offloaded socket implementations, which is critical for binding socket
API with an interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of keeping a boolean informing whether a network interface is
offloaded at socket layer or not, keep a pointer to a function which
allows to create an offloaded socket. Native interfaces keep this as
NULL, while for offloaded interfaces it allows to connect an offloaded
socket implementation with an interface.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
Reuse switch statements checking valid parameter values that were
already part of simplelink_socket() function, by creating 3 helper
functions for conversion of each parameter (family, type and protocol)
from Zephyr to Simplelink values.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Reset the ESP modem inside the device initialisation function so that
errors can be detected through the use of `device_is_ready`.
Fixes#43891 for this driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the network device instantiation macro to above the esp_init
function so that static variables declared by the macro are visible to
the init function.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In the newer ESP32 AT command versions, the CWMODE command takes an
optional parameter (<auto_connect>) which controls whether the module
will automatically attempt to connect to an AP when switching modes.
This parameter defaults to enabling auto-connect if not specified.
Without this change, modules can successfully connect to an AP before
the `CWAUTOCONN=0` command is processed, resulting in a
`NET_EVENT_WIFI_CONNECT_RESULT` before `NET_EVENT_IF_UP`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Claim the net_context mutext associated with a socket before claiming
the socket mutex. The receive callback claims the net_context mutex
internally, which will now always succeed immediately.
The TX path claims the net_context mutex before the socket mutex, and if
we don't use the same order, we can end up in a deadlock.
Fixes#43470.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Previous commit 579ca90e25 to
build wifi drivers as a library changed the include path for
the WINC1500 driver, which results in the include path being
local to the library. However, the Atmel HAL requires
wifi_winc1500_nm_bsp_internal.h to in the search path. So
change the include path to be global.
Fixes#43456
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
spi_dt_spec structure initialization should not be done
in the runtime during spi bus initialization because it
caues kernel panic.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/43046
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
A common pattern here was to take the work item as the subfield of a
containing object. But the contained field is not a k_work, it's a
k_work_delayable.
Things were working only because the work field was first, so the
pointers had the same value. Do things right and fix things to
produce correct code if/when that field ever moves within delayable.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Stop using redundant DEV_DATA/DEV_CFG macros and use dev->data
and dev->config instead.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adding these definitions help ease of porting POSIX applications.
They currently do nothing in the core network stack and will
return an error if used. However, they help port some POSIX
without changing these. In particular, this enables using the
Nim programming language's standard library with Zephyr.
- The values copy Linux amd64, similar to the other SO_OPTIONS
- Add SO_SNDBUF to fix simplelink wifi
- Use compat options in simplelink wifi
Signed-off-by: Jaremy J. Creechley <jaremy.creechley@panthalassa.com>
Fix a problem introduced in 6ea54db334 that caused the poll operation to
take 10x more time than intended.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Sending AT+CWLAP was introduced with commit f2859f9501 ("drivers:
wifi: esp_at: changes to scanning") as a way to easily test introduced
changes, rather than on purpose. Remove that now, as there is no
particular reason to send it and additionally it breaks setup phase:
<err> modem_cmd_handler: command AT+CWLAP ret:-5
<err> wifi_esp_at: Init failed -5
with ESP-AT firmware v2.1.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Size of data pointer for event revival must be at least sizeof
event queue item.
Update to send whole event (id + event)
Signed-off-by: Pavlo Hamov <p.hamov@venstar.com>
If CONFIG_WIFI_ESP_AT_SCAN_MAC_ADDRESS: mac addr included in
scanning results.
if CONFIG_WIFI_ESP_AT_SCAN_PASSIVE: passive scanning is used instead of
default active scanning.
If CONFIG_WIFI_ESP_AT_SCAN_RESULT_RSSI_ORDERED: scanning response
ordered by RSSI.
Signed-off-by: Jani Hirsimäki <jani.hirsimaki@nordicsemi.no>
