Header file generation from device tree was failing in pulling mode.
Restrict the interrupt node usage to interrupt mode only.
Signed-off-by: Romain Mahoux <romain@mahoux.fr>
In the continuation of the previous commit, replace _OPT_ by _DOMAIN_
in macros relating to this feature.
hen, adapt drivers and tests to this new wording.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
When the uart is configured in non interrupt mode, then the mmio address
should be provided via DEVICE_MMIO_ROM_INIT.
Signed-off-by: Ayan Kumar Halder <ayankuma@amd.com>
Zephyr kernel is dependent on trace.
Trace is dependent on segger rtt.
Segger rtt MUST NOT be dependent on zephyr kernel.
Move lock functions from header into c file to avoid circular
dependency. This fix needs an update of the segger repository.
Fixes#43887.
Signed-off-by: Christoph Coenen <ccoenen@baumer.com>
Add workaround for development kits on which interface chip (segger chip)
is dropping bytes when they are sent in bursts. Issue has been seen on
DK which have multiple virtual com ports on the USB.
A workaround is adding periodic busy waits to introduce gaps in the
transmission.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
MISRA C:2012 Rule 14.4 (The controlling expression of an if statement
and the controlling expression of an iteration-statement shall have
essentially Boolean type.)
Use `do { ... } while (false)' instead of `do { ... } while (0)'.
Use comparisons with zero instead of implicitly testing integers.
The commit is a subset of the original auditable-branch commit:
5d02614e34a86b549c7707d3d9f0984bc3a5f22a
Signed-off-by: Simon Hein <SHein@baumer.com>
The uart_pipe_isr() double-checks whether rx interrupt occured by
calling uart_irq_is_pending() first. Get rid of that function call since
it is redundant (i.e. nothing more is done or checked inside that
conditional).
Signed-off-by: Jan Kuliga <jtkuliga@gmail.com>
The LPUART driver activates the "noise" error interrupt but
neglects to clear the error bit when the interrupt occurs. This
causes the device to freeze. Clear the "noise" status to avoid
the lockup and track instances of this as a UART_ERROR_PARITY.
fixes#47568
Signed-off-by: David Leach <david.leach@nxp.com>
Update serial drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
The driver has be DT_INST based for a while so the Kconfig
symbols CONFIG_UART_PL011_PORT0<n> aren't used. So lets
remove them.
Signed-off-by: Kumar Gala <galak@kernel.org>
The driver has be DT_INST based for a while so the Kconfig
symbols CONFIG_UART_RV32M1_LPUART_<n> aren't used. So lets
remove them.
Signed-off-by: Kumar Gala <galak@kernel.org>
Update serial drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
We remove 'depend on' Kconfig for symbols that would be implied by
the devicetree node existing.
Signed-off-by: Kumar Gala <galak@kernel.org>
Correct issue where transmission complete interrupt was not disabled when
using interrupt driven serial API with power management enabled,
resulting in continuous spurious interrupts that effectively locked
the system.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
The built-in USB serial peripheral is a virtual serial and does not
allow to be configured like a normal UART.
Removing the unused UART config parameters.
Also reducing initialization to single-instance only.
Signed-off-by: Martin Jäger <martin@libre.solar>
This include is only required if typeof() macro is used, which
is not the case for the serial / uart driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add simple clock control node in devicetree for beetle to handle
relationship between drivers (uart, timers, gpio) and clock controller
device.
Signed-off-by: Kumar Gala <galak@kernel.org>
The TI SimpleLink SDK got updated to version '4.40.04.04' in 'hal_ti'.
This introduced renames of some functions in HAL and has to be reflected
in Zephyr drivers which make use of them.
This renames 'PRCMPowerDomainStatus' to 'PRCMPowerDomainsAllOn' in all
affected 'cc13xx_cc26xx' drivers.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This peripheral combines a hardware-based USB CDC ACM serial interface
and a JTAG interface.
It is present in the ESP32-C3.
Signed-off-by: Martin Jäger <martin@libre.solar>
The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Following zephyr's style guideline, all if statements, including single
line statements shall have braces.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch is to enhance the uart ns16550 driver to get clock frequency
from clock manager or devicetree if clock_frequency is defined.
Signed-off-by: Teik Heng Chong <teik.heng.chong@intel.com>
As we work to phase out devicetree 'label properties, convert
driver to just use dev->name instead of DT_INST_LABEL.
Signed-off-by: Kumar Gala <galak@kernel.org>
Change the Kconfig prompt for the Xilinx Zynq-7000/ZynqMP PS UART driver to
indicate whichs SoCs it supports.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Fix wrong control register address used in uart_altera_jtag_init
function which caused memory corruption.
Signed-off-by: Khor Swee Aun <swee.aun.khor@intel.com>
mcuboot may use a uart as logger. After application boot from mcuboot,
uart remains in some unknown state. It could leads to some unpredictable
uart behaviour. This commit fixes the issue by resetting of uart state
at the beginning of uart init.
Signed-off-by: Alex Kolosov <rikorsev@gmail.com>
Stop relying on <soc.h> to access HAL APIs. Use generic, per-API headers
instead. Note that <soc.h> has been left as is for now, since ARM MPU
relies on a fragile chain of includes/type definitions.
This change should improve compilation efficiency, as we no longer pull
APIs that are not needed. A similar approach is followed by STM32
drivers.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The driver supported getting register shift from Devicetree, from a
custom definition in SoC headers (fragile) or, it took a default value.
This change simplifies things by making reg-shift property required in
all instances.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This driver carefully saved the errno value from the failing call and
then didn't use it in the ERROR report, using the potentially invalid
current errno value (which may have been set by the close call).
Signed-off-by: Keith Packard <keithp@keithp.com>
<soc.h> was included because some CMSIS helpers (__DMB/__ISB) were
needed. In ARM SoCs, inclusion of CMSIS headers depends mainly on how
HALs decide to do it, being usually an inefficient and fragile include
chain. Note that on ARM64 we're in a better position, as those are
defined in-tree.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
<soc.h> has been traditionally been used as a proxy to HAL headers,
register definitions, etc. Nowadays, <soc.h> is anarchy. It serves a
different purpose depending on the SoC. In some cases it includes HALs,
in some others it works as a header sink/proxy (for no good reason), as
a register definition when there's no HAL... To make things worse, it is
being included in code that is, in theory, non-SoC specific.
This patch is part of a series intended to improve the situation by
removing <soc.h> usage when not needed, and by eventually removing it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a new selectable Kconfig option to decide wether the device driver
is a MMIO device or not. Previous to this patch, the decision was maded
based on the existence of a definition in <soc.h>. The design was
fragile, as code compiled anyway if the definition was not present.
All platforms/boards that had the definition in <soc.h> select the
Kconfig option in their respective defconfig files.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As per XMCLib documentation we need to check that data has been received
before reading the buffers.
Fixes test_uart_poll_in test in tests/drivers/uart/uart_basic_api.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
