This removes these network sample applications
samples/net/coaps_client
samples/net/coaps_server
as they are using low level mbedtls APIs. You should use
preferably socket based or net-app based applications.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Payload variable can hold max 64 bytes but value of size can be more
than that. Memsetting using value of size can overrun payload array.
Fixes coverity issue.
Coverity-CID: 187823
Fixes: #9638
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This removes these network sample applications
samples/net/mbedtls_sslclient
samples/net/mbedtls_dtlsserver
samples/net/mbedtls_dtlsclient
as they are using low level mbedtls APIs. You should use
preferably the samples/net/sockets/echo_[server|client] applications
instead, or as a last option use net-app based applications
in samples/net/echo_[server|client] if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
sample/net/README no longer exists so this removes its mention since
it is already described how to use echo-client at the end of the
document. Also state that CONFIG_BT_6LOWPAN shall be set in order to
use Bluetooth 6LoWPAN module with Linux.
Fixes#9727
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Rename GPIO_INT_CONF to GPIO_FLAGS in order to be able to use
the definition generated by the devicetree, eliminating the need
for definition in the board.h file
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Due to a change in the company name, the LwM2M copyrights need
to be changed from "Open Source Foundries Limited" ->
"Foundries.io".
Signed-off-by: Michael Scott <mike@foundries.io>
The fault dump text has changed since this sample was originally
written, so update the README accordingly.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The mpu_stack_guard sample was failing in both configurations on arm
platforms. Fix the regexes in sample.yaml so they work on multiple
architectures.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The nvs sample assumed a 1 KB flash erase block size, which caused the
sample to fail on frdm_k64f because its erase block size is 4 KB. Get
the erase block size from dts instead.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes the platform whitelist, leaving just the depends_on/supported
pattern to select which platforms the sample can run on.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This commit adds settings module to the peripheral_hids that makes
bonding persistent.
Now it is possible to connect with previously bonded device.
Fixes#9580
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Per: http://pubs.opengroup.org/onlinepubs/009695399/functions/socket.html
"Upon successful completion, socket() shall return a non-negative
integer, the socket file descriptor."
The test in prepare_fds() however fails if socket fd is
zero (non-negative), which should be a valid value.
This was found while testing the SimpleLink socket offload driver,
which can return a zero-valued socket fd, per the POSIX spec.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This sample application produces slightly different outputs based on
the chosen driver configuration mode. In Measuring Mode with trigger
support, the acceleration on all three axis is printed in m/s^2 at
the sampling rate (ODR). In polled Measuring Mode the instantaneous
acceleration is polled every 2 seconds. In most high-g applications,
a single (3-axis) acceleration sample at the peak of an impact event
contains sufficient information about the event, and the full
acceleration history is not required.
In this Max Peak Detect Mode the device returns only the over
threshold peak acceleration between two consecutive sample fetches or
trigger events. Instead of printing the acceleration on all three axis,
the sample application calculates the vector magnitude
(root sum squared) and displays the result in g rather than in m/s^2,
together with an bar graph.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Update yaml files to include warp7_m4 board in the platform_whitelist
for fxos8700 and fxas21002 sensors.
Signed-off-by: Diego Sueiro <diego.sueiro@gmail.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We will implement this as a core feature using tracing points and make
it available to any application.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
WDT_NRFX is now enabling by default. Its configuration from proj.conf
files was removed.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
I removed GPIO configuration from board files and enabled them
as default in driver Kconfig file. All boards had GPIO ports
enabled that is why I decided to enable it by default.
Power management example was changed to use new driver.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
This commit contains several fixes for DTLS implementation, proposed in
a post-merge review of #9338.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of having one delayed_work struct / IP address, use
only one delayed_work struct for lifetime timer. This saves
over 20 bytes / allocated address struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
With the recent changes to identity address handling the local
identity address is only guaranteed to be available once
settings_load() has been called. Move the initialization of dev_uuid
to the appropriate place.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a sample application to show the LP5562 driver. The three RGB
channels are used to set multiple colors after each other under the
assumption that accordingly colored LEDs are connected. Blinking is also
shown in multiple colors.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
Rather than having some implied name for the logging name, explicitly
pass it in the macros LOG_MODULE_REGISTER & LOG_MODULE_DECLARE.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Prepend the text 'cmake_minimum_required(VERSION 3.8.2)' into the
application and test build scripts.
Modern versions of CMake will spam users with a deprecation warning
when the toplevel CMakeLists.txt does not specify a CMake
version. This is documented in bug #8355.
To resolve this we include a cmake_minimum_required() line into the
toplevel build scripts. Additionally, cmake_minimum_required is
invoked from within boilerplate.cmake. The highest version will be
enforced.
This patch allows us to afterwards change CMake policy CMP000 from OLD
to NEW which in turn finally rids us of the verbose warning.
The extra boilerplate is considered more acceptable than the verbosity
of the CMP0000 policy.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Added transition time support. Now if NODE received optional
parameters then they would get entertained by it.
Added two new models that is Generic Default Transition Time
Server & Client resp. to complete overall architecture to
support newly introduced architecture.
With this it was possible to implement
gen_move_set/gen_move_set_unack message handlers.
Removed redundancy from App & revised overall implementation.
Fixed Bugs. Upgraded coding style. Added & replaced comments to
improve code readability. Improved printk messages.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added time stamp based message filtering as per Bluetooth Mesh
Developer study guide for each Server. Now even if message
source address & TID is same even after 6 seconds then
that will get proceed otherwise will get ignored.
Coding style improvements.
If particular Server model receive Prohibited values as per
Mesh Model Specification then that message will not get entertained.
Now proper status code will get send if user upgrade
light_lightness_range_state & light_ctl_temperature_range_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Upgraded state binding algorithm & created separated
file for it. Moved light_default_status_init() from
device_composition.c to main.c. Shorten variables names
defined in struct light_lightness_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Fixing the min max range validation where condtions on
upper and lower bound are logically 'ANDed'. Fixing it
by logical ORing the result.
CID: 18325, 18326
Fixes Issue #9289
Fixes Issue #9290
Signed-off-by: Subramanian Meenakshi Sundaram <subbu147@gmail.com>
This finishes refactor of splitting off net_config library name from
net_app library, started in c60df1311, c89a06dbc. This commit makes
sure that Kconfig options are prefixed with CONFIG_NET_CONFIG_
instead of CONFIG_NET_APP_, and propagates these changes thru the
app configs in the tree.
Also, minor dependency, etc. tweaks are made.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
