The signal strength for the connectivity monitor was
defined as int8_t, however this was too small for
LTE RSRP values, which has range [-140,-44].
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
Lwm2m firmware object have defined a write of zero length
string as a cancel operation.
So allow lwm2m_set_opaque(path, NULL, 0);
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Content-format tests do not require network or
Newlibc, so by removing these filters.
Defined a native_posix as the only integration platform
because all simulated arm-zephyr-eabi platforms are
filtered out by Twister.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
As the lwm2m_reset_message() is stubbed, it does not remove
a message from rettry queue. Therefore depending on the
simulation speed, retries can happen one or many times.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
ZTEST(lwm2m_registry, test_strings) is using opaque resource
0/0/3 to write a test string "coap://127.0.0.1" which
happens to be same length as default key size.
Need more room to add end marker and verify it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Pause and resume functionality was written into assumption
that sockets are closed before resuming.
With use new options CONFIG_LWM2M_RD_CLIENT_STOP_POLLING_AT_IDLE
or CONFIG_LWM2M_RD_CLIENT_LISTEN_AT_IDLE this is not always true.
Fix the state machine, so that on those cases, sockets are not
closed and resume is always similar like from the QUEUE mode.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Add support for using X509 certificates.
Default settings use ECDSA certificates with SHA256 hash.
When different settings are required clients should overwrite
struct lwm2m_ctx->load_credentials() and
struct lwm2m_ctx->set_socketoptions()
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When writing string data to resources which are string types,
we should count in the terminating character into the data length.
Corner cases exist where LwM2M resource type is opaque but
lwm2m_get_string() or lwm2m_set_string() are used to read/write
the data. We must ensure string termination on those case, but
terminating character must not be stored in the engine buffer
or counted in the data length as this might be considered
as part of the binary data.
Fixes#59196
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As the test uses iterable sections, we need to utilize
zephyr_iterable_section for targets that need linker script
generation like arm-clang.
So add zephyr_iterable_section() for the ROM sections that the
testcases utilizes.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Some utility functions belong to lwm2m_util.c.
Block contexts belong to lwm2m_message_handling.c
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Many areas of Zephyr divide and round up without using the DIV_ROUND_UP
macro. Make use of it, so that we make use of a tested system macro and
at the same time we make code more readable.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
If server or bootstrap writes a lifetime value less than
configured default lifetime, client will automatically overwrite
the value with default one.
This gives better control for the application where client
behaviour is fine tuned on the Kconfig, but default values
from bootstrap server cannot be fine-tuned.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This function had only one use in SenML CBOR formatter and it
contained some specific tweaks, so move the function to be a
static member of that module.
Fixes#53674
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
TC_START is used to evaluate output of tests and is used internally by
ztest when a test starts, no need to call this manually here.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This drops using the environmental part when referencing ZEPHYR_BASE
as the environment value does not have to be set and, in most cases,
is no longer set at all.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
There is no reason why the default size should be 2,
because an event is only a combination of
{uint32_t + void*} + info
Using 2 as default causes a high risk of loosing events,
setting the default to a more sensible value of 5 still
restricts memory usage but keeps it more safe.
Signed-off-by: Jeroen van Dooren <jeroen.van.dooren@nobleo.nl>
Update unit tests for lwm2m_rd_client.c after adding new event
LWM2M_RD_CLIENT_EVENT_REG_UPDATE.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Add the following to testcase.yaml to handle the issue:
filter: TOOLCHAIN_HAS_NEWLIB == 1
Fixes#54440
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The test checks if options are added to a CoAP buffer correctly.
It should eventually check if opstions can be added out of order
e.g. not in increasing order of option codes.
Signed-off-by: Lukas Woodtli <lukas.woodtli@husqvarnagroup.com>
These tests test the basic functionality of creating
object and resource instances, setting buffers, writing
and reading to and from resources, and setting and triggering
callbacks.
Signed-off-by: Jarno Lämsä <jarno.lamsa@nordicsemi.no>
This directory has existing LwM2M tests and tests/net/lib
has other protocols as well, so keep all in one place.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Not all toolchains support newlib so tests that require newlib need
to have a filter to we don't try and build those tests on those
testcases. Some newer tests are missing:
filter: TOOLCHAIN_HAS_NEWLIB == 1
so add that to testcases that needed.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
under certain conditions the current implementation did not maintain
the desired sort order.
Signed-off-by: Pascal Brogle <pascal.brogle@husqvarnagroup.com>
The old random timer test was not random-looking
enough on some platforms.
Replace with new test which is psuedo-xoshiro.
The generator is still deterministic
and does not depend on entropy at all,
but should look more random for testing.
Change name of generator tree-wide also.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Validate that basic lifecycling and usage of the MQTT-SN client
work correctly by providing a mocked MQTT-SN transport. Connection
setup and state changes are tested.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
Validate that the encoding and decoding part of the MQTT-SN library
work correctly using prepared byte arrays of messages.
Signed-off-by: René Beckmann <rene.beckmann@grandcentrix.net>
