- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Added initial version of Infineon CAT1 Flash driver
- Added binding file for infineon,cat1-flash-controller.yaml
- Added overlays for subsys/nvs and drivers/flash_shell
to support cy8cproto_063_ble, cy8cproto_062_4343w boards
- Defined erase-block-size in PSoC6 MPN dtsi.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
The condition just needs to be <=, as it is ok
to write say 128KB in a 128KB storage partition.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Introduced tests covers following features:
- Write protection - enabling, disabling, confirming that it works.
- Readout protection - checking current status.
These features are implemented on STM32F4 boards, so we only allow these
boards.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
After 'flash_ex_op' syscall was added we are able to expose vendor
specific features to the user.
This patch moves existing tests to 'tests/drivers/common'. New tests for
vendor specific operations should go to vendor directory under
'tests/drivers/flash'.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Flash test can't be tested automatically on (at least some) _ns targets
by CI.
Set a dedicated test scenario for _ns targets in build_only.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Filtering used image_1_nonsecure as DTS node label, while correct
one is slot1_ns_partition.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Fix all line-length errors detected by yamllint:
yamllint -f parsable -c .yamllint $( find -regex '.*\.y[a]*ml' ) | \
grep '(line-length)'
Using a limit is set to 100 columns, not touching the commandlines in
GitHub workflows (at least for now).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
integration_platforms help us control what get built/executed in CI and
for each PR submitted. They do not filter out platforms, instead they
just minimize the amount of builds/testing for a particular
tests/sample.
Tests still run on all supported platforms when not in integration mode.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Need to erase as many bytes as the size to write.
The size to erase is expressed aligned on the page size.
(assuming the page_info.size is constant)
In case the page_info.size is lower than the size to write,
the next write operation will fail.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add property mxicy,mx25r-power-mode to jedec,spi-nor binding for
controlling low power/high performance mode on Macronix MX25R* Ultra Low
Power flash devices.
- "low-power" configures the flash in ultra low power mode.
- "high-performance" configures the flash in high performance mode.
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
The test requires external memory connected but it was not
reflected in the yaml decription. Therefore, the test was failing
instead of being skipped. It is the same story as with #47241
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The current stm32l562_dk_ns has no flash partitions defined. This add
flash partitions following partition sizes that are compatible with
the TF-M platform defined at flash_layout.h and removes the redundant
overlays board files.
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Increasing the stack size to pass the
tests/drivers/flash testcase on the disco_l475_iot1 disco kit.
Note that CONFIG_MPU_ALLOW_FLASH_WRITE is set.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
this commit adds an overlay to run the tests/drivers/flash
on the b_u585i_iot02a_ns target platform.
It renames the non-secure partition to slot1_ns_partition
to match the testcases.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Change default flash driver testcase to depend on FLASH_HAS_DRIVER_ENABLED,
and the presence of a storage partition in the output DTS, so that the test
will run on all platforms that report flash support.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Some SOCs, such as NXP's LPC family, expect a minimum write size of 512
bytes. Increase the EXPECTED_SIZE definition for flash driver test to
512 so that test can pass on these platforms.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When there is no external pull-up on the CSN line and the line
is put into the low-power mode (input direction and disconnected
buffer), after some time its level falls to low and some flash
chips, like for example MX25R64, exit the Deep Power-down mode
when that happens. To prevent this, activate the GPIO internal
pull-up for this line in boards that do not have the external
pull-up on it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The SPI flash were recently changed to use an alias to identify the
flash chip in:
64fbbd9a44 boards: Add alias to boards with spi-flash node
This caused some CI test failure for the nrf52840dk test with the
nrf52840dk_mx25l51245g overlay, as it changes the flash nodelabel of the
board dts file. Adding the correct alias to the overlay file to point to
the correct one.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
- The MX25UM51345G flash is connected to FLEXSPI PortA for
mimxrt595_evk.
- Updated flexspi_mx25um51345g driver to support DTR OPI mode.
- Tested with tests/drivers/flash.
Signed-off-by: Chay Guo <changyi.guo@nxp.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There was mistake in parentheses application in
the expression which calculates the value.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The `size` property is expressed in `bits` unit.
The value should be calculated as bits to bytes conversion.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added overlay with DTS of MX25L51245G qspi flash
memory. DTS configures qspi clock to 2 MHz which is supported
by nRF52840.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
If a user has a 1GB external flash it is currently not possible
to configure this through DTS. To allow for such a configuration
we add an option which specifies the size in bytes not bits.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Restore the testcase to run on the qspi nor-flash controller
of the disco_l475_iot1 board
of the disco stm32f746 board
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Various obsolote and misnamed platfomrs in test filters theat went
undetected for a while.
Fixes#41222
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
drivers.flash.nrf_qspi_nor and drivers.flash.soc_flash_nrf:
keep nrf52840dk_nrf52840 as integration_platform
drivers.flash.default:
Use mimxrt1060_evk instead as integration_platform,
this is the only platform allowed.
drivers.flash.stm32:
Add a bunch of boards as integration_platforms for
this test configuration.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit enables soc-flash support in disco_l475_iot1
only for flash test. Using overlays, it adds soc-flash storage
partition and deletes qspi-flash storage parition for
flash test. Both flash test and spi_flash application
has been tested on disco_l475_iot1 platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
This commit enables soc-flash support in stm32f746g_disco only for
flash test. Using overlays, it adds soc-flash storage partition and
deletes qspi-flash storage partition for flash test. Both flash test and
spi_flash application has been tested on stm32f746g_disco platform.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
