The RSSI value in net_pkt (net_pkt_cb_ieee802154.rssi) was used
inconsistently across drivers. Some drivers did cast a signed dBm value
directly to net_pkt's unsigned byte value. Others were assigning the
negative value of the signed dBm value and again others were offsetting
and stretching the signed dBm value linearly onto the full unsigned byte
range.
This change standardizes net_pkt's rssi attribute to represent RSSI on
the RX path as an unsigned integer ranging from 0 (–174 dBm) to 254 (80
dBm) and lets 255 represent an "unknown RSSI" (IEEE 802.15.4-2020,
section 6.16.2.8). On the TX path the rssi attribute will always be
zero. Out-of-range values will be truncated to max/min values.
The change also introduces conversion functions to and from signed dBm
values and introduces these consistently to all existing call sites. The
"unknown RSSI" value is represented as INT16_MIN in this case.
In some cases drivers had to be changed to calculate dBm values from
internal hardware specific representations.
The conversion functions are fully covered by unit tests.
Fixes: #58494
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
As `net_if_get_link_addr()` returns a pointer to the link layer
structure, some extra protection is needed to prevent its contents from
being changed while accessed. Using the mutex lock associated with an
interface should do the trick.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Print new NET_IF_IPV6_NO_ND and NET_IF_IPV6_NO_MLD flags when
the "net iface" command is used.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The net_pkt pointer provided to net pkt commands was not validated in
any way. Therefore it was fairly easy to crash an application by
providing invalid address.
This commit adds the pointer validation. It's checked whether the
pointer provided belongs to any net_pkt pools known to the net stack,
and if the pointer offset within the slab actually points to the
beginning of the net_pkt structure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix a bug in setting MAC address using net_if API, the API doesn't do a
memcpy but just stores the pointer and shell was passing stack pointer.
We can use dynamic allocation but freeing the memory for the MAC address
would be trickier, so, use the net management API and let the underlying
drivers figure out the MAC address memory management.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Recently introduced MISRA-C CI check complains about use of a duplicte
tag, so, shorten the variable from shell->sh to avoid same name as the
structure.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Rewrite the "net ping" command handling, to allow the command to be
aborted during execution. This includes:
* Using shell bypass mode to capture input whilst the ping is active.
* Using system workqueue to send individual ping requestes, instead of
sending ping requests directly from shell thread, in a blocking
manner. This is needed because in order to receive input in the
registered bypass handler, the shell thread must be unblocked to
process the input.
* The bypass mode is left after receiveing `CTRL-C` character (which
cancels the ping), after receiving all expected Ping replies or after
the timeout occurs.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The "net mem" command handler did not take the variable buffer length
configuration, and failed to build in such case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case Echo Request did not carry timestamp (i. e. requested payload
size was smaller than 4), there won't be a timestamp in the reply
either. Such replies should not be ignored. Instead, simply skip the
turnround time calculation if timestamp is missing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add -s parameter to the net ping command, allowing to specify the
payload size for the Echo Request.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Improve the parse_arg() helper function used with shell ping command,
by allowing to parse arguments provided in hex.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new option to the net shell ping command, which allows to specify
the DSCP/ECN values for an outgoing ping request. The option is
compatible with Linux ping command.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for setting DSCP/ECN values for an outgoing ping request.
Additionally, copy DSCP/ECN values from an incoming ping request into
the ping response, like Linux does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add support for setting DSCP/ECN values for an outgoing ping request.
Additionally, copy DSCP/ECN values from an incoming ping request into
the ping response, like Linux does.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Without pkt_unref(), the shell command "net udp bind" will fail to
receive after a few packets ("net allocs" shows that memory is still
allocated).
Signed-off-by: Andreas Müller <andreas.mueller@husqvarnagroup.com>
* reduced cyclomatic complexity
* group validation by family to make the validation easier to understand
and extend
* change preprocessor markup where possible to allow for complete code
elimination when features (esp. IP) are disabled
* renamed net_context_get/set_ip_proto() to net_context_get_proto()
While the latter is formally part of the public API and might therefore
have to be deprecated rather than renamed, it is considered internal API
by the net developers, see
https://github.com/zephyrproject-rtos/zephyr/pull/48751#discussion_r942402612
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
The code contained several repeated composite IPv4/v6 and UDP/TCP
preprocessor statements that can be simplified by introducing a hidden
NET_IP preprocessor constant that captures what probably is actually
"meant" by this code.
While we were on it we also used the new constant to further isolate
IP-specific code from non-IP specific generics.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In the existing the value received from the other side by the TCP options
is used as MSS for transmission. Since the MSS options are an
announcement rather then a negotionation, it is likely the receiver will
have a different and possibly bigger MSS than allowed by our side.
This allow potentially for different a MSS in the receive and transmit
path.
Directly using the received MSS could cause problems when our MSS is only
allowed to be small. At transmission, for that reason take the minimum of
the received MSS and our desired MSS to find a value compatible to both
sides of the link.
Rename the function to net_tcp_get_recv_mss to net_tcp_get_supported_mss
to better reflect its function in the new situation.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As the receive window is now decreased at the TCP module level, other
direct net_context users are also responsible for acknowledging the
received data with net_context_update_recv_wnd() - otherwise, the
communication will stall.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The strtol() function use errno to return error code.
However, it is not being initialized in the parser_arg()
function before calling the strtol(). Thus, hitting error
when performing net ping command with -c / -i parameters.
Signed-off-by: Kweh Hock Leong <hock.leong.kweh@intel.com>
The device PM subsystem _depends_ on device, not vice-versa. Devices
only hold a reference to struct pm_device now, and initialize this
reference with the value provided in Z_DEVICE_DEFINE. This requirement
can be solved with a forward struct declaration, meaning there is no
need to include device PM headers.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since drivers implement a callback based on action and not the state,
we should be using the API based on the action instead of the one based
on the state.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The print specifier for `atomic_t` should be updated
to `%ld`, `%lu`, or `%lx` to account for the type
change of `atomic_t` to `long`.
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
TCP2 is no longer needed as it is the unique implementation since the
legacy one has been removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add __printf_like modifier to validate strings used by shell.
Fixing warnings triggered by this change.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Currently the stack is limited to a maximum of 2 incoming fragments per
packet. While this can be enough in most cases, it might not be enough
in other cases.
Make this value configurable at build time.
Signed-off-by: Florian Vaussard <florian.vaussard@gmail.com>
Listing a neighbour table with "net nbr" command, when a neighbour w/o
assigned link address was present, resulted in an assert condition. Add
additional check to prevent this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The verb tense for the suspended state was not consistent with other
states. The likely reason: state was being used as a command/action.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Set the default behaviour of the networking subsystem so that
no TX or RX threads are created. This will save RAM as there
is no need to allocate stack space for the RX/TX threads.
Also this will give small improvement to network packet latency
shown here:
* with 1 traffic class (1 TX and RX thread)
Avg TX net_pkt (42707) time 60 us [0->22->15->22=59 us]
Avg RX net_pkt (42697) time 36 us [0->10->3->12->7=32 us]
* with 0 traffic classes (no TX and RX threads)
Avg TX net_pkt (41608) time 42 us [0->21->20=41 us]
Avg RX net_pkt (41593) time 31 us [0->9->12->8=29 us]
In this qemu_x86 test run, 40k UDP packets was transferred between
echo-server and echo-client. In TX the speed increase was 30% and
in RX it was 14%.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_shell only uses iface_flags2str when CONFIG_NET_NATIVE is
enabled. Disabling this produces an "unused function" warning for this
function. Wrap the function in an #ifdef to silence the warning for this
configuration.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
